A B C D E F G H I L M N O P Q R S T U V W

A

A1000Device - Class in org.lsst.ccs.subsystem.refrig

Handles a Yaskawa A1000 series variable frequency motor drive.

A1000Device() - Constructor for class org.lsst.ccs.subsystem.refrig.A1000Device

areEqual(double, double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Compares two numbers for equality, accounting for possible NaNs.

B

BK1696Device - Class in org.lsst.ccs.subsystem.refrig

Handles a B&K model 1696 power supply device.

BK1696Device() - Constructor for class org.lsst.ccs.subsystem.refrig.BK1696Device

Constructor.

BK9130Device - Class in org.lsst.ccs.subsystem.refrig

Handles a B&K model 9130 power supply device.

BK9130Device() - Constructor for class org.lsst.ccs.subsystem.refrig.BK9130Device

Constructor.

BKXLNDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a B&K XLN series power supply device.

BKXLNDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.BKXLNDevice

Constructor.

build() - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.ColdCompressor

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.CryoCompressor

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.EnthalpyExchangeChannel

build() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets up the fan speed control loop timer task.

build() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Starts the temperature control task.

build() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.RefrigActionManager

Build phase.

build() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.SubCoolingChannel

build() - Method in class org.lsst.ccs.subsystem.refrig.SuperHeatChannel

build() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Starts the control loop iteration and temperature limit check tasks.

bulkPowerOn(boolean) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Turns on/off the bulk power supply.

C

CHAN_CENTER - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Constants.

CHAN_COLD1 - Static variable in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

CHAN_COLD2 - Static variable in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

CHAN_COOLANT_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

CHAN_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

CHAN_EEPR_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

CHAN_FREQUENCY - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

CHAN_HGB_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

CHAN_IN_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

CHAN_IN_ENABLED - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

CHAN_IN_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

CHAN_MINUS_Y - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Constants.

CHAN_OUT_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

CHAN_OUT_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

CHAN_PLUS_Y - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Constants.

CHAN_TEMPERATURE - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

CHAN_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

chanNames - Variable in class org.lsst.ccs.subsystem.refrig.ConfiguredAverageChannel

channel - Variable in class org.lsst.ccs.subsystem.refrig.Compressor.SwCondData

channel2 - Variable in class org.lsst.ccs.subsystem.refrig.Compressor.SwCondData

channelDescs - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

channelMap - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

ChannelState() - Constructor for class org.lsst.ccs.subsystem.refrig.PowerDevice.ChannelState

chanWeights - Variable in class org.lsst.ccs.subsystem.refrig.ConfiguredAverageChannel

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Checks a channel's parameters for validity.

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Checks a channel's parameters for validity.

checkHwLine(String, int) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Checks an output line number.

checkHwLine(String, int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Checks an output line number.

ChillerAlertListener - Class in org.lsst.ccs.subsystem.refrig

Listen for alerts from specified other subsystems; for a safety-related alert which at alarm level is meant to shut off chiller flow, raise a corresponding chiller-subsystem aler.

ChillerAlertListener() - Constructor for class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

ChillerSubsystem - Class in org.lsst.ccs.subsystem.refrig

Implements the chiller subsystem.

ChillerSubsystem() - Constructor for class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Constructor.

clearIgnoreVacuumBad() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to clear ignoring a bad vacuum.

clearLatch(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Clears a latched condition.

clearLatch(String) - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Clears a (named) latched condition.

clearLatch(int) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Clears a latched condition.

clearOffline() - Method in class org.lsst.ccs.subsystem.refrig.SimHeaterPsDevice

Command to clear the offline state.

close() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

Closes the device.

close() - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.PcpMaq20Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Pre-closure cleanup.

close() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

close() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Pre-closure cleanup.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

Pre-closure cleanup.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Closes the connection.

cmprPowerChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

ColdCompLimits - Class in org.lsst.ccs.subsystem.refrig

Manages refrigeration cold compressor limits.

ColdCompLimits() - Constructor for class org.lsst.ccs.subsystem.refrig.ColdCompLimits

ColdCompressor - Class in org.lsst.ccs.subsystem.refrig

Controls a refrigeration cold compressor.

ColdCompressor() - Constructor for class org.lsst.ccs.subsystem.refrig.ColdCompressor

Constructor.

coldplateChannelPath - Variable in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

COMP_LIMITS - Static variable in class org.lsst.ccs.subsystem.refrig.CompLimits

Constants.

COMP_LIMITS - Static variable in class org.lsst.ccs.subsystem.refrig.Compressor

Constants.

CompLimits - Class in org.lsst.ccs.subsystem.refrig

Manages refrigeration compressor limits.

CompLimits() - Constructor for class org.lsst.ccs.subsystem.refrig.CompLimits

Constructor.

CompLimits.LimitData - Class in org.lsst.ccs.subsystem.refrig

CompMaq20Device - Class in org.lsst.ccs.subsystem.refrig

Handles compressor MAQ20 DIOL and VO modules.

CompMaq20Device() - Constructor for class org.lsst.ccs.subsystem.refrig.CompMaq20Device

CompMaq20PWMControl - Class in org.lsst.ccs.subsystem.refrig

Compressor extension to MAQ20 PWM control.

CompMaq20PWMControl() - Constructor for class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

CompPlutoDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a compressor control Pluto PLC.

CompPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constructor.

Compressor - Class in org.lsst.ccs.subsystem.refrig

Controls a refrigeration compressor.

Compressor(CompState) - Constructor for class org.lsst.ccs.subsystem.refrig.Compressor

Constructor.

Compressor.SwCondData - Class in org.lsst.ccs.subsystem.refrig

Compressor.SwitchDevice - Interface in org.lsst.ccs.subsystem.refrig

condData - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

ConfiguredAverageChannel - Class in org.lsst.ccs.subsystem.refrig

ConfiguredAverageChannel() - Constructor for class org.lsst.ccs.subsystem.refrig.ConfiguredAverageChannel

connected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

connected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Listens for the arrival of the companion refrigeration subsystem.

connType - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

CryoCompLimits - Class in org.lsst.ccs.subsystem.refrig

Manages refrigeration cryo compressor limits.

CryoCompLimits() - Constructor for class org.lsst.ccs.subsystem.refrig.CryoCompLimits

CryoCompressor - Class in org.lsst.ccs.subsystem.refrig

Controls a refrigeration cryo compressor.

CryoCompressor() - Constructor for class org.lsst.ccs.subsystem.refrig.CryoCompressor

Constructor.

D

DcsDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a Sorensen DCS series power supply.

DcsDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.DcsDevice

Constructor.

delayLimit - Variable in class org.lsst.ccs.subsystem.refrig.CompLimits.LimitData

delayTime - Variable in class org.lsst.ccs.subsystem.refrig.CompLimits.LimitData

devcId - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

devcParm - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

disable() - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

Disables the duty cycle setting.

disconnected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

disconnected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Listens for the departure of the companion refrigeration subsystem.

discPress - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

discPressChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

discTemp - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

discTempChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

DL34970Device - Class in org.lsst.ccs.subsystem.refrig

Handles an Agilent 34970A data logger.

DL34970Device(String, String, int) - Constructor for class org.lsst.ccs.subsystem.refrig.DL34970Device

Constructor.

DL34970Device() - Constructor for class org.lsst.ccs.subsystem.refrig.DL34970Device

E

emergencyClearErrors() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Clear chiller errors and warnings (for emergency use only) [Monitoring routinely clears errors, this might interfere.]

enable() - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

Enables the duty cycle setting.

enableOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Enables/disables the output of a set of channels.

enableOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Enables the output.

enterParameters() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

EnthalpyExchangeChannel - Class in org.lsst.ccs.subsystem.refrig

A derived channel to calculate enthalpy exchange

EnthalpyExchangeChannel() - Constructor for class org.lsst.ccs.subsystem.refrig.EnthalpyExchangeChannel

evaluateDerivedValue() - Method in class org.lsst.ccs.subsystem.refrig.ConfiguredAverageChannel

Evaluate weighted average of specified channel values.

evaluateDerivedValue() - Method in class org.lsst.ccs.subsystem.refrig.EnthalpyExchangeChannel

evaluateDerivedValue() - Method in class org.lsst.ccs.subsystem.refrig.SubCoolingChannel

evaluateDerivedValue() - Method in class org.lsst.ccs.subsystem.refrig.SuperHeatChannel

EvaporatorPressDevice - Class in org.lsst.ccs.subsystem.refrig

A virtual device used to calculate cold system evaporator pressure drop

EvaporatorPressDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

F

FanControl - Class in org.lsst.ccs.subsystem.refrig

Implements a fan speed loop controller for the utility trunk system.

FanControl() - Constructor for class org.lsst.ccs.subsystem.refrig.FanControl

flashLeds() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

G

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Command to get the list of channel names.

getChillerState() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Get the current ChillerState

getConditionNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

getConditionState(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the state of a condition.

getConditionState(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the state of a condition.

getConnType() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the connection type.

getControlState() - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Gets the state of the chiller system.

getDefaultRamp() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Gets the default ramp rate.

getDevcId() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the device ID.

getDevcParm() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the device parameter.

getErrorCode() - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the PLC error code.

getErrorCode() - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

getErrorCode() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the PLC error code.

getFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Gets the frequency.

getFrequency() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Gets the frequency.

getGain() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the gain.

getGroupForChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Gets the group for a channel.

getGroupForChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets the group for a channel.

getGroupForChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Define Channel groups

getGroupForChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the group for a channel.

getHeaterNames() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Gets the list of heater names.

getIdent() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Gets the identification.

getIndex() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Gets the compressor index.

getLastErrorAlert() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Get last chiller alert (CHILLER_ERR) state

getLatchNames() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Gets the list of latched condition names.

getLatchNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

getLatchState(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the state of a latched condition.

getLatchState(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the state of a latched condition.

getLimitData() - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Gets the limit data

getMaxChannel() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the maximum channel number.

getMinChannel() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the minimum channel number.

getModIndex() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Gets the module index.

getName() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Gets the name.

getOutput(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets the output state.

getOutput(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Gets the output state.

getOutput(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the output state.

getOutput(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Gets the power supply output state.

getPath() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Gets the path.

getPower(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets the power of a set of channels.

getPower(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the power for a channel.

getPowerChannel() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Gets the power channel,

getPowerChannel() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Gets the power channel,

getPowerDevice() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Gets the power device,

getPowerDevice() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Gets the power device,

getSetTemp() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the target temperature difference.

getState() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Gets VFD state and checks for alarm and fault conditions.

getState() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Gets the compressor state.

getState() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Gets VFD state (and checks for alarm and fault conditions).

getSwitchNames() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to get the valid switch names.

getSwitchNames() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Gets the list of switch names.

getSwitchState(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Gets the state of a switch.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Gets the state of the heat exchanger module.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Gets the state of the PCP system.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Gets the state of the refrigeration module.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Gets the state of the thermal control system.

getTempChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Command to get the temperature channel names.

getTempControlMode() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Get temperatire-control mode

getTempLimits() - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Gets the temperature limits.

getTempLimits() - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Gets the temperature limits.

getTimeConstant() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the time constant.

getValveNames() - Method in class org.lsst.ccs.subsystem.refrig.ColdCompressor

Command to get the valid valve names.

getValvePosition(int) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Gets a valve position.

getValvePosition(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Gets a valve position.

gotCommand - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

GP390Device - Class in org.lsst.ccs.subsystem.refrig

Handles an MKS GP390 vacuum gauge.

GP390Device(String, int) - Constructor for class org.lsst.ccs.subsystem.refrig.GP390Device

Constructor.

GP390Device() - Constructor for class org.lsst.ccs.subsystem.refrig.GP390Device

H

hasNoLoad(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets whether a "no load" error occurred.

hasNoLoad(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets whether a "no load" error occurred.

hasVoltError(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets whether a voltage setting error occurred.

hasVoltError(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets whether a voltage setting error occurred.

HeaterPIControl - Class in org.lsst.ccs.subsystem.refrig

Implements a temperature controller for the refrigeration system.

HeaterPIControl() - Constructor for class org.lsst.ccs.subsystem.refrig.HeaterPIControl

HeaterPsDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a SLAC heater power supply.

HeaterPsDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constructor.

HexMain - Class in org.lsst.ccs.subsystem.refrig

Implements the refrigeration heat exchanger monitoring subsystem.

HexMain() - Constructor for class org.lsst.ccs.subsystem.refrig.HexMain

Constructor.

host - Variable in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

I

ident - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

immedLimit - Variable in class org.lsst.ccs.subsystem.refrig.CompLimits.LimitData

inCurrent - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

inEnabled - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

init() - Method in class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

Init phase.

init() - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

init() method

init() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Registers the possible alerts.

init() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Init phase.

init() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Life-cycle initialization.

init() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Init phase.

init() - Method in class org.lsst.ccs.subsystem.refrig.RefrigActionManager

Init phase.

init() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

init() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Life-cycle initialization.

init() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

Life-cycle initialization.

init() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

Life-cycle initialization.

initChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Initializes a channel.

initChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Initializes a channel.

initChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Initializes a channel.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

Check device parameters

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Performs basic initialization.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Performs basic initialization.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Performs basic initialization.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Performs basic initialization.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Performs configuration.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

Initializes the device.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Post-connection initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Performs basic initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimHeaterPsDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Post-connection initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

Post-connection initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Performs basic initialization.

initParams() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

InTESTChillerDevice - Class in org.lsst.ccs.subsystem.refrig

Interfaces with driver for inTEST chiller Version adapted to Chiller driver version (JIRA LSStCCSDRIVERS-432) which sets chiller parameters one at a time, rather than in groups.

InTESTChillerDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

inVoltage - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

isBulkPowerOn() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets the on state of the bulk power supply.

isConditionActive(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Gets whether a condition is active.

isConditionActive(int) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Gets whether a condition is active.

isEnabled(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets the enabled state of a set of channels.

isEnabled(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the enabled state.

isEnterRequired() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isFaultDetected() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isHwLineSet(int) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Gets the set state of an output line.

isHwLineSet(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Gets the set state of an output line.

isLatchActive(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Gets whether a latched condition is active.

isLatchActive(int) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Gets whether a latched condition is active.

isLatchLatched(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Gets whether a latched condition is latched.

isLatchLatched(int) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Gets whether a latched condition is latched.

isLineOn(int) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

Gets the state of an output line.

isLoopActive() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the control loop state.

isLower - Variable in class org.lsst.ccs.subsystem.refrig.CompLimits.LimitData

isOpTimeActive() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isOutputOn() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Gets whether output enabled.

isOverTemp() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Gets whether the temperature is over the limit.

isPlcActive() - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Tests whether the PLC is active

isPLCActive() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Checks whether PLC is active

isPlcActive() - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Tests whether the PLC is active

isReversePermitted() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isRunCmndFwdRev() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Gets the on state of a switch.

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the on state of a switch.

isSwitchOn(int) - Method in interface org.lsst.ccs.subsystem.refrig.Compressor.SwitchDevice

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Gets the on state of a switch.

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Gets the on state of a switch.

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the on state of a switch.

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Gets the on state of a switch.

L

limitData - Variable in class org.lsst.ccs.subsystem.refrig.CompLimits

LimitData() - Constructor for class org.lsst.ccs.subsystem.refrig.CompLimits.LimitData

limitData - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

listenTo - Variable in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

listQueries() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

List queries

listSettableParameters() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

List settable (enumerated) Chiller parameters

listStatusBits() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

List status bits

loadChillerParameters() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Command to load all Chiller parameters from active non-volatile memory

M

maintainPower() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Maintains the power for all channels at their set values.

maintainPower() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Maintains the power for all channels at their set value.

maq20Devc - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

maqDevc - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

maqDevc - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

maxCurrent - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

maxCurrent - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

maxPressure - Variable in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

MCCDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a Measurement Computing DAQ box.

MCCDevice(String, String) - Constructor for class org.lsst.ccs.subsystem.refrig.MCCDevice

Constructor.

MCCDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.MCCDevice

minVoltage - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

mon - Variable in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

MON_TYPE_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

MON_TYPE_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

MON_TYPE_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

mTypeMap - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

N

name - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

NETWORK_CONN_INVALID - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

noShutoff - Variable in class org.lsst.ccs.subsystem.refrig.CompLimits.LimitData

NUM_CHANNELS - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

NUM_CHANS - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

NUM_CHANS - Static variable in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

NUM_CHANS - Static variable in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Constants.

NUM_COLD_RTDS - Static variable in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

NUM_COLD_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

NUM_COLD_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

NUM_CRYO_RTDS - Static variable in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

NUM_CRYO_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

NUM_CRYO_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

O

onAlert(AlertEvent) - Method in class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

Handler for received AlertEvent

onAlert(AlertEvent) - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Alert event handler.

onAlert(AlertEvent) - Method in class org.lsst.ccs.subsystem.refrig.RefrigActionManager

Raised alert handler.

onAlert(AlertEvent) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Alert event handler.

onStatusMessage(StatusMessage) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

If message is StatusSubsystemData from monitoring, search for Channel containing coldplate temperature data, and save data.

onStatusMessage(StatusMessage) - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Handles refrigeration status messages.

org.lsst.ccs.subsystem.refrig - package org.lsst.ccs.subsystem.refrig

outCurrent - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

outVoltage - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

P

path - Variable in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

PcpMaq20Device - Class in org.lsst.ccs.subsystem.refrig

Handles PcpPowerDevice child.

PcpMaq20Device() - Constructor for class org.lsst.ccs.subsystem.refrig.PcpMaq20Device

PcpPlutoDevice - Class in org.lsst.ccs.subsystem.refrig

Handles the protection system Pluto PLC.

PcpPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Constructor.

PcpPowerControl - Class in org.lsst.ccs.subsystem.refrig

Controls a Maq20-controlled power supply.

PcpPowerControl() - Constructor for class org.lsst.ccs.subsystem.refrig.PcpPowerControl

PcpPowerControl.ChannelDesc - Class in org.lsst.ccs.subsystem.refrig

PcpPowerDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a PCP heater power supply controller.

PcpPowerDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Constructor.

plutoDevc - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

postInit() - Method in class org.lsst.ccs.subsystem.refrig.ColdCompressor

Initializes the cold compressor control.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Initializes the compressor limits.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Initializes the compressor control.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Initializes cryo compressor limits.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.CryoCompressor

Initializes the cryo compressor control.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Initializes the parameters.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Initializes the parameters.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Initializes the subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Initializes the subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Initializes the refrigeration subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Initializes the thermal subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Initializes the parameters.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

postStart (must follow Device.start())

postStart() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Starts the compressor control.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Starts the subsystem.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Starts the subsystem.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Starts the subsystem.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Sets initial channel values.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Starts the subsystem.

Power() - Constructor for class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Constructor.

PowerDevice - Class in org.lsst.ccs.subsystem.refrig

Defines a power supply interface.

PowerDevice(String, PowerSupplyDriver, int, int, int) - Constructor for class org.lsst.ccs.subsystem.refrig.PowerDevice

Constructor.

PowerDevice.ChannelState - Class in org.lsst.ccs.subsystem.refrig

Inner class for saving the power state of a channel.

processData(double[]) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Receives data periodically from the WattsUp? meter.

PrototypeColdPlateSubsystem - Class in org.lsst.ccs.subsystem.refrig

Enables testing of the prototype cold plate.

PrototypeColdPlateSubsystem() - Constructor for class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Constructor.

psd - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

Q

queryChiller(Chiller.Query) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Send query to Chiller and show response

quitControllingTemperature() - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Quit controlling temperature

quitControllingTemperature() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Quit controlling temperature

R

raiseAlarm(Alert, ChillerAlertListener.AlertAction) - Method in class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

Respond to received Alert by raising Chiller Alert at alarm level

readAnyParameter(int) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Read a specified Chiller setup parameter

readBusVoltage() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.EvaporatorPressDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Reads a channel.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Reads a channel.

readChannelGroup(String) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Reads Channels for the provided group.

readChannelGroup(String) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads all heater channels as a group.

readChannelGroup(String) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Reads the monitor channel group.

readChannelGroup(String) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Initializes voltages and currents as unread.

readCurrent() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readCurrent(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads the current.

readCurrent() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Reads a current.

readCurrent(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Reads the current.

readCurrent(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Reads the current.

readCurrent(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Gets the power supply current.

readFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readNamedParameter(Chiller.FParam) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Read a Chiller parmeter specified by name

readRegister(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readRegisters(int, int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readTemperature() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readValue(int) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Reads an analog value.

readVoltage() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readVoltage(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads the voltage.

readVoltage() - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Reads a voltage.

readVoltage(int) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Reads the voltage.

readVoltage(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Reads the voltage.

readVoltage(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Gets the power supply voltage.

RefrigActionManager - Class in org.lsst.ccs.subsystem.refrig

This class manages the refrig actions in response to Alert payloads.

RefrigActionManager() - Constructor for class org.lsst.ccs.subsystem.refrig.RefrigActionManager

Constructor.

RefrigMain - Class in org.lsst.ccs.subsystem.refrig

Implements the refrigeration compressor subsystem.

RefrigMain() - Constructor for class org.lsst.ccs.subsystem.refrig.RefrigMain

Constructor.

requireListening - Variable in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

reset() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Resets the PI controller.

reset() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Resets the controller.

resetFault() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Resets the current fault

resetLatches() - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Resets all latched conditions.

resetLatches() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to reset the latches.

resetLatches() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Resets all latches.

resetVfdFault() - Method in class org.lsst.ccs.subsystem.refrig.ColdCompressor

Command to reset a VFD fault condition.

restart() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Restarts the control loop.

runForward() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

runReverse() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

S

saveChillerParameters() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Command to save current Chiller parameters to active non-volatile memory

saveParameters() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

selectDUT(boolean) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Select DUT vs Normal temperature-control mode

setAccessLevel(A1000.AccessLevel) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setBaudRate(A1000.BaudRate) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setBulkPowerOn(boolean) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Turns on/off the bulk power supply.

setCapLifetimeUsed(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Command to set a channel value.

setClosed() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Changes the WattsUp? meter open state.

setCmprPowerDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the compressor power delayed limit.

setCmprPowerDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the compressor power delay time.

setCmprPowerImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the compressor power immediate limit.

setColdPowerWeights(double[]) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets cold trim heat power weight factors.

setCompressorName(String) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Sets the compressor name.

setCondition(String, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setCondition(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

setControlMode(A1000.ControlMode) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setCryoPowerWeights(double[]) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets cryo trim heat power weight factors.

setCurrent(int, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the current.

setCurrent(double) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Sets a current.

setCurrent(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Sets the current.

setCurrent(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the current.

setCurrent(int, double) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Sets the power supply current.

setDiscPressDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the discharge pressure delayed limit.

setDiscPressDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.ColdCompLimits

Sets the discharge pressure delay time.

setDiscPressImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the discharge pressure immediate limit.

setDiscTempDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the discharge temperature delayed limit.

setDiscTempDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the discharge temperature delay time.

setDiscTempImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the discharge temperature immediate limit.

setDiscTempLowImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the discharge temperature low immediate limit.

setDutyCycle1(double) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

Sets duty cycle 1.

setDutyCycle1(double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

Sets duty cycle 1.

setEnterRequired(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setErrorAction(A1000.ErrorAction) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setFanOperationTime(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setFaultDetected(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setFlow(double) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Set flow rate Command is accepted even if pumps are off, still setting flow setpoint.

setFlow(double) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Set chiller flow rate

setFreqRefSrc(A1000.FreqRefSrc) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Sets the frequency.

setFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Sets the frequency.

setGain(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets the gain.

setHeaterPower(String, double) - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Sets a heater power value.

setHeaterState(String, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Sets a heater state.

setHeaterTempLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the heater temperature immediate limit.

setHwLine(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Sets an output line on or off.

setHwLine(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Sets an output line on or off.

setIgbtLifetimeUsed(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setIgnoreVacuumBad(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to set to ignore a bad vacuum.

setIndex(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the compressor index.

setInputVoltage(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setLatchActive(String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setLatchActive(int) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

setLatchLatched(String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setLatchLatched(int) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

setLatchWarning(String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setLineOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

Sets the state of an output line.

setLiquidTempDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.ColdCompLimits

Sets the liquid temperature delayed limit.

setLiquidTempDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.ColdCompLimits

Sets the liquid temperature delay time.

setLiquidTempImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.ColdCompLimits

Sets the liquid temperature immediate limit.

setListenTo(String) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Select refrig subsystem to listen to for average coldplate temperature

setLoadFract(double) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Sets the load power fraction

setMaxFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setMinFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setNamedSwitchOn(String, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PrototypeColdPlateSubsystem

Turns a (named) switch on or off.

setNodeAddress(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setOffline() - Method in class org.lsst.ccs.subsystem.refrig.SimHeaterPsDevice

Command to set the device offline.

setOilLevelImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the oil level immediate limit.

setOnline(boolean) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the online state.

setOperationTime(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setOpState(TrimHeaterOpState) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the operation state.

setOpTimeActive(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setOrificeOffPress(double) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the orifice valve off pressure.

setOrificeOnPress(double) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the orifice valve on pressure.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the output state.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Sets the output state.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the output state.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Sets the power supply output state.

setOutput(boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPowerControl

Sets a simulated output state.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPowerDevice

Sets the output state.

setParam(Chiller.FParam, double) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Command to execute a parameter-setting command, enumerared in Chiller.FParam, checking that value gets set as requested.

setParameterBulk(Map<String, Object>) - Method in class org.lsst.ccs.subsystem.refrig.ConfiguredAverageChannel

Set configuration parameters to new values.

setParity(A1000.Parity) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setPhaseSepTempDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the phase separator temperature delayed limit.

setPhaseSepTempDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the phase separator temperature delay.

setPlateTemperature(int, double) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets a plate temperature value.

setPlateTempLow(boolean) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets whether the plate temperature is too low.

setPLCActive(boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setPower(int, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the power for a set of channels.

setPower(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the power.

setPower(double) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the constant power value.

setPowered(boolean) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Changes the WattsUp? meter powered state.

setPressDiffImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CryoCompLimits

Sets the discharge pressure difference immediate limit.

setReversePermitted(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setRunCmndFwdRev(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setRunCmndSrc(A1000.RunCmndSrc) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setRunProg(A1000.RunProg) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setScbrLifetimeUsed(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setSetTemp(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets the target temperature difference.

setStopMethod(A1000.StopMethod) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setSuctTempImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.CompLimits

Sets the suction temperature immediate limit.

setSwitch(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Turns a switch on or off..

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Sets a switch on or off.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Sets a switch on or off.

setSwitchOn(String, boolean) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to turn a (named) switch on or off..

setSwitchOn(int, boolean) - Method in interface org.lsst.ccs.subsystem.refrig.Compressor.SwitchDevice

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Sets a switch on or off.

setSwitchOn(int, boolean, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PcpPlutoDevice

Sets a switch on or off.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Sets a switch on or off.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Sets a switch on or off.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

Sets a switch on or off.

setTankPressure(double) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Command to set chiller tank pressure

setTankPressure(double) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Command to set chiller tank pressure

setTemp(double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Sets the target temperature.

setTemp(double) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the target temperature.

setTemperature(double) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Set chiller temperature and go there using default ramp

setTemperature(double) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Set chiller temperature and go there using default ramp

setTemperatureWithRamp(double, double) - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Set chiller temperature and go there using provided ramp rate

setTemperatureWithRamp(double, double) - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Set chiller temperature and go there using provided ramp rate

setTempWeight(String, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Sets a temperature weight.

setTempWeight(String, double) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets a temperature weight.

setTempWeights(Map<String, Double>) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Sets the temperature weights.

setTempWeights(Map<String, Double>) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the temperature weights.

setTimeConstant(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets the time constant.

settlingTime - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

setTrimHeaterPower(int, double) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets a trim heater power value.

setTrimHeaterState(int, TrimHeaterOpState) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets a trim heater operation state.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Sets the compressor type.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Sets the compressor type.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Sets the compressor type.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Sets the compressor type.

setVacuumBad(boolean) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets whether the vacuum is bad.

setValvePosition(String, double) - Method in class org.lsst.ccs.subsystem.refrig.ColdCompressor

Command to set a valve position.

setValvePosition(int, double) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Sets a valve position.

setValvePosition(int, double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Sets a valve position.

setVfdFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.ColdCompressor

Command to set the VFD frequency.

setVfSelection(A1000.VfSelection) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setVoltage(int, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the voltage.

setVoltage(double) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerControl

Sets a voltage.

setVoltage(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PcpPowerDevice

Sets the voltage.

setVoltage(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the voltage.

setVoltage(int, double) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Sets the power supply voltage.

setVoltage(double) - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPowerControl

Sets a voltage.

setVoltageUnits(A1000.VoltageUnits) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showAccessLevel() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showAlarmCode() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showAlarmCodes() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showAlarmDesc() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showAlarmDesc(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showBaudRate() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showCapLifetimeUsed() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showChillerState() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Show current chiller state

showControlMode() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showCurrFaultCode() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showCurrFaultDesc() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showDriveStatus() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showErrorAction() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showErrorWords() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Show error and warning words in hex Ascii

showEvtReg() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Show event register bits.

showFanLifetimeUsed() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFanOperationTime() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFaultDesc(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFreqRefSrc() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFrequencyApp() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showIgbtLifetimeUsed() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showInputVoltage() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showMaxFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showMinFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showModelName() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showNodeAddress() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showOperationTime() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showOutputKwh() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showParity() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showPrevFaultCode() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showPrevFaultDesc() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showRunCmndSrc() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showRunCount() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showRunProg() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showScbrLifetimeUsed() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showStatusReg() - Method in class org.lsst.ccs.subsystem.refrig.InTESTChillerDevice

Show status register bits

showStopMethod() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showVfSelection() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showVoltageUnits() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

shutdown() - Method in class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

Shutdown phase.

shutdown() - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

shutdown() - Method in class org.lsst.ccs.subsystem.refrig.RefrigActionManager

Shutdown phase.

SimA1000Device - Class in org.lsst.ccs.subsystem.refrig

Handles a Simulated Yaskawa A1000 series variable frequency motor drive.

SimA1000Device() - Constructor for class org.lsst.ccs.subsystem.refrig.SimA1000Device

SimCompMaq20Device - Class in org.lsst.ccs.subsystem.refrig

Handles the simulated compressor MAQ20 device.

SimCompMaq20Device() - Constructor for class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

SimCompMaq20PWMControl - Class in org.lsst.ccs.subsystem.refrig

Compressor extension to MAQ20 PWM control.

SimCompMaq20PWMControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

SimCompPlutoDevice - Class in org.lsst.ccs.subsystem.refrig

Simulates the compressor Pluto PLC.

SimCompPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Constructor.

SimDevice - Class in org.lsst.ccs.subsystem.refrig

Simulates the refrigeration hardware.

SimDevice(String, String) - Constructor for class org.lsst.ccs.subsystem.refrig.SimDevice

Constructor.

SimDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimDevice

SimDevice.Power - Class in org.lsst.ccs.subsystem.refrig

Inner class to simulate power supply device with attached load.

SimHeaterPsDevice - Class in org.lsst.ccs.subsystem.refrig

Provides simulation functions for the heater PS

SimHeaterPsDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimHeaterPsDevice

SimMaq20AnalogControl - Class in org.lsst.ccs.subsystem.refrig

Handles a simulated Dataforth Maq20 system analog output module.

SimMaq20AnalogControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

SimMaq20Device - Class in org.lsst.ccs.subsystem.refrig

Handles the simulated MAQ20 device.

SimMaq20Device() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20Device

SimMaq20DiscControl - Class in org.lsst.ccs.subsystem.refrig

Handles a simulated Dataforth Maq20 system discrete output module.

SimMaq20DiscControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

SimMaq20PulseControl - Class in org.lsst.ccs.subsystem.refrig

Handles a simulated Dataforth Maq20 system pulse control channel.

SimMaq20PulseControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

SimPcpPlutoDevice - Class in org.lsst.ccs.subsystem.refrig

Handles the simulated PCP PLC.

SimPcpPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimPcpPlutoDevice

SimPcpPowerControl - Class in org.lsst.ccs.subsystem.refrig

Controls a simulated PCP power supply.

SimPcpPowerControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimPcpPowerControl

SimPcpPowerDevice - Class in org.lsst.ccs.subsystem.refrig

Simulates the PCP power device.

SimPcpPowerDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimPcpPowerDevice

SimpleSimDevice - Class in org.lsst.ccs.subsystem.refrig

Implements a simple simulated device.

SimpleSimDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

SimPowerDevice - Class in org.lsst.ccs.subsystem.refrig

Implementation of a simulated power supply device.

SimPowerDevice(double[]) - Constructor for class org.lsst.ccs.subsystem.refrig.SimPowerDevice

Constructor.

softMaxCurrent - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

start() - Method in class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

Start phase.

start(double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Starts the control loop.

start() - Method in class org.lsst.ccs.subsystem.refrig.RefrigActionManager

Start phase.

start() - Method in class org.lsst.ccs.subsystem.refrig.SimPcpPowerDevice

Start phase - set heater voltages to zero.

startLoop(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Starts the control loop.

startLoop() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Starts the control loop.

state - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

stateChanged - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

StickyCondition - Class in org.lsst.ccs.subsystem.refrig

Class to manage a boolean condition that requires repeated new values to change it.

stop() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

stop() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Stops the control loop.

stopLoop() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Stops the control loop.

SubCoolingChannel - Class in org.lsst.ccs.subsystem.refrig

A Derived channel to calculate sub cooling

SubCoolingChannel() - Constructor for class org.lsst.ccs.subsystem.refrig.SubCoolingChannel

suctTempChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

SuperHeatChannel - Class in org.lsst.ccs.subsystem.refrig

A Derived channel to calculate superheat

SuperHeatChannel() - Constructor for class org.lsst.ccs.subsystem.refrig.SuperHeatChannel

SW_BYPASS_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SW_COOLANT_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SW_ENABLE - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

SW_HEATER - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

SW_LIGHTS - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

SW_OIL_SEP_HEATER - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SW_ORIFICE_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SW_SURGE_HEATER - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SwCondData() - Constructor for class org.lsst.ccs.subsystem.refrig.Compressor.SwCondData

switchChannels - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

switchDevices - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

T

temperatureTimeoutFactor - Variable in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

thermalAlertSource - Variable in class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

ThermalMain - Class in org.lsst.ccs.subsystem.refrig

Implements the refrigeration thermal control subsystem.

ThermalMain() - Constructor for class org.lsst.ccs.subsystem.refrig.ThermalMain

Constructor

TrimHeaterControl - Class in org.lsst.ccs.subsystem.refrig

Implements a temperature controller for the refrigeration system.

TrimHeaterControl() - Constructor for class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

TYPE_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_CURR - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_STATUS - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_TEMP - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_VOLTS - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_TEMP - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_TOTAL_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

U

update(boolean) - Method in class org.lsst.ccs.subsystem.refrig.StickyCondition

Updates the condition.

updateState() - Method in class org.lsst.ccs.subsystem.refrig.ColdCompressor

Updates the compressor state.

updateState() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Updates the compressor state.

updateState() - Method in class org.lsst.ccs.subsystem.refrig.CryoCompressor

Updates the compressor state.

updateSystem() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Updates the compressor system.

V

vacuumAlertSource - Variable in class org.lsst.ccs.subsystem.refrig.ChillerAlertListener

validateBulkChange(Map<String, Object>) - Method in class org.lsst.ccs.subsystem.refrig.ConfiguredAverageChannel

Checks validity of a proposed set of ConfigurationParameters The Channel name and weight arrays must have same length,.

vetoTransitionToNormalMode() - Method in class org.lsst.ccs.subsystem.refrig.ChillerSubsystem

Veto transition to normal mode if Chiller state is not at setpoint, or if listening to thermal subsystem is required but not active.

W

writeRegisters(int, int...) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

writeValue(int, double) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Writes an analog value.

WUDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a WattsUp power meter.

WUDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.WUDevice

A B C D E F G H I L M N O P Q R S T U V W