- getAlert() - Method in enum org.lsst.ccs.subsystem.vacuum.constants.VacuumAlert
-
- getAnalogOut(int) - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets an analog output setting.
- getAtmospheric() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the atmospheric pressure calibration factor.
- getAutoZeroLimit() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the MicroPirani auto zero limit.
- getBaudRate() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the baud rate.
- getCalibrationGas() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the calibration gas.
- getCCProtDelay() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets cold cathode protection delay.
- getChannelNames() - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpDevice
-
Gets the list of defined channel names.
- getChannelNumbers() - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpDevice
-
Gets the list of defined channel numbers.
- getChannels() - Method in class org.lsst.ccs.subsystem.vacuum.config.VacuumConfig
-
- getCondition(int) - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getConditionIds() - Method in class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Gets the list of conditions in use.
- getControlPanel(String) - Method in class org.lsst.ccs.subsystem.vacuum.ui.jas.VacControlPlugin.VacControl
-
- getCurrent() - Method in class org.lsst.ccs.subsystem.vacuum.config.VacuumConfig.Channel
-
- getCurrent() - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpControl
-
- getDescription() - Method in enum org.lsst.ccs.subsystem.vacuum.constants.VacuumAlert
-
- getDeviceState(int) - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getDeviceType() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the transducer device type.
- getFirmwareVersion() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the firmware version.
- getFullScale() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the cold cathode full-scale pressure calibration factor.
- getHardwareVersion() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the hardware version.
- getHighIntPressure() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets high integration pressure.
- getId() - Method in enum org.lsst.ccs.subsystem.vacuum.constants.VacuumAlert
-
- getLatch(int) - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getLatchIds() - Method in class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Gets the list of latched conditions in use.
- getListener() - Method in class org.lsst.ccs.subsystem.vacuum.ui.jas.VacControlPlugin.VacControl
-
- getLowIntPressure() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets low integration pressure.
- getManufacturer() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the manufacturer.
- getModel() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the model.
- getName() - Method in class org.lsst.ccs.subsystem.vacuum.config.VacuumConfig.Channel
-
- getName() - Method in class org.lsst.ccs.subsystem.vacuum.config.VacuumConfig
-
- getOffPressureCC() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets cold cathode turn-off pressure.
- getOnPressureCC() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets cold cathode turn-on pressure.
- getPartNumber() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the part number.
- getPlcState() - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getPower() - Method in class org.lsst.ccs.subsystem.vacuum.config.VacuumConfig.Channel
-
- getPower() - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpControl
-
- getPressureUnit() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the pressure unit.
- getRelayDirection(int) - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets a relay trip direction.
- getRelayEnable(int) - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets a relay enabled state.
- getRelayHyst(int) - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets a relay hysteresis value.
- getRelayTrip(int) - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets a relay trip point.
- getSensorDose() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the sensor pressure dose.
- getSensorDoseLimit() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets cold cathode pressure dose limit.
- getSensorTimeOn() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the sensor time on.
- getSerialNumber() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the serial number.
- getStatus() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the transducer status.
- getSwitchEnable(int) - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getSwitchNames() - Method in class org.lsst.ccs.subsystem.vacuum.VacuumMain
-
Gets the list of switch names.
- getSwitchState(int) - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getTickMillis() - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getTimeOn() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the transducer time on.
- getUserTag() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the user tag.
- getVacuumState() - Method in class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- getVacuumState() - Method in class org.lsst.ccs.subsystem.vacuum.VacuumMain
-
Gets the state of the Vacuum system.
- getView() - Method in class org.lsst.ccs.subsystem.vacuum.ui.VacuumPage
-
Creates a MonitorView that displays the vacuum plate schematics.
- getVoltage() - Method in class org.lsst.ccs.subsystem.vacuum.config.VacuumConfig.Channel
-
- getVoltage() - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpControl
-
- ImageChannel - Enum in org.lsst.ccs.subsystem.vacuum.constants
-
Defines the possible channels used in the image-based display
- initControlPanel() - Method in class org.lsst.ccs.subsystem.vacuum.ui.jas.VacControlPlugin.VacControl
-
- initDevice() - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpDevice
-
Performs configuration.
- initDevice() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Performs configuration.
- initDevice() - Method in class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Performs basic initialization.
- initDevice() - Method in class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
Performs basic initialization.
- initialize() - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpDevice
-
Performs full initialization.
- initialize() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Performs full initialization.
- initialize() - Method in class org.lsst.ccs.subsystem.vacuum.ui.jas.VacControlPlugin
-
- initialize() - Method in class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
Performs full initialization.
- initPanel() - Method in class org.lsst.ccs.subsystem.vacuum.ui.VacControlPanel
-
- IonPumpControl - Class in org.lsst.ccs.subsystem.vacuum
-
Implements ion pump control functions.
- IonPumpControl() - Constructor for class org.lsst.ccs.subsystem.vacuum.IonPumpControl
-
- IonPumpDevice - Class in org.lsst.ccs.subsystem.vacuum
-
Interface to a SLAC ion pump controller.
- IonPumpDevice() - Constructor for class org.lsst.ccs.subsystem.vacuum.IonPumpDevice
-
- isCCAutoPowerOn() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets cold cathode auto power state.
- isCCPowerOn() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets cold cathode power state.
- isChannelOn(int) - Method in class org.lsst.ccs.subsystem.vacuum.IonPumpDevice
-
Gets the on state of a channel.
- isConditionActive(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Gets whether a condition is active.
- isConditionActive(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
Gets whether a condition is active.
- isIdentifying() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the identify state.
- isLatchActive(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Gets whether a latched condition is active.
- isLatchActive(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
Gets whether a latched condition is active.
- isLatchLatched(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Gets whether a latched condition is latched.
- isLatchLatched(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
Gets whether a latched condition is latched.
- isPLCActive() - Method in class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
Tests whether the PLC is active
- isRelayActive(int) - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets whether a relay is active.
- isRelayDelayed() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the relay trip delayed state.
- isResponseDelayed() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the RS-485 delayed response state.
- isSwitchEnabled() - Method in class org.lsst.ccs.subsystem.vacuum.Mks9xxDevice
-
Gets the switch enabled state.
- isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Gets the on state of a switch.
- isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
Gets the on state of a switch.
- VacControl() - Constructor for class org.lsst.ccs.subsystem.vacuum.ui.jas.VacControlPlugin.VacControl
-
- VacControlPanel - Class in org.lsst.ccs.subsystem.vacuum.ui
-
Implements the utility monitoring panel.
- VacControlPanel(String) - Constructor for class org.lsst.ccs.subsystem.vacuum.ui.VacControlPanel
-
- VacControlPlugin - Class in org.lsst.ccs.subsystem.vacuum.ui.jas
-
- VacControlPlugin() - Constructor for class org.lsst.ccs.subsystem.vacuum.ui.jas.VacControlPlugin
-
- VacControlPlugin.VacControl - Class in org.lsst.ccs.subsystem.vacuum.ui.jas
-
- VacPlutoDevice - Class in org.lsst.ccs.subsystem.vacuum
-
Handles the vacuum system Pluto PLC.
- VacPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.vacuum.VacPlutoDevice
-
Constructor.
- VacSimPlutoDevice - Class in org.lsst.ccs.subsystem.vacuum
-
Handles the vacuum system Pluto PLC.
- VacSimPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.vacuum.VacSimPlutoDevice
-
- VacSysState - Class in org.lsst.ccs.subsystem.vacuum.data
-
Contains the state of the vacuum subsystem
- VacSysState() - Constructor for class org.lsst.ccs.subsystem.vacuum.data.VacSysState
-
- VACUUM_TYPE - Static variable in class org.lsst.ccs.subsystem.vacuum.constants.VacuumAgentProperties
-
- VacuumAgentProperties - Class in org.lsst.ccs.subsystem.vacuum.constants
-
Agent properties for vacuum system type objects.
- VacuumAgentProperties() - Constructor for class org.lsst.ccs.subsystem.vacuum.constants.VacuumAgentProperties
-
- VacuumAlert - Enum in org.lsst.ccs.subsystem.vacuum.constants
-
Vacuum Alerts.
- VacuumConfig - Class in org.lsst.ccs.subsystem.vacuum.config
-
Contains a set of cryo configuration values.
- VacuumConfig() - Constructor for class org.lsst.ccs.subsystem.vacuum.config.VacuumConfig
-
- VacuumConfig.Channel - Class in org.lsst.ccs.subsystem.vacuum.config
-
- VacuumException - Exception in org.lsst.ccs.subsystem.vacuum.data
-
An exception throw by any cryo subsystem due to internal state errors.
- VacuumException(String) - Constructor for exception org.lsst.ccs.subsystem.vacuum.data.VacuumException
-
- VacuumException(Exception) - Constructor for exception org.lsst.ccs.subsystem.vacuum.data.VacuumException
-
- VacuumMain - Class in org.lsst.ccs.subsystem.vacuum
-
The cryogenics vacuum system
- VacuumMain() - Constructor for class org.lsst.ccs.subsystem.vacuum.VacuumMain
-
- VacuumPage - Class in org.lsst.ccs.subsystem.vacuum.ui
-
Displays the vacuum plate schematics.
- VacuumPage(AgentInfo) - Constructor for class org.lsst.ccs.subsystem.vacuum.ui.VacuumPage
-
- VacuumState - Enum in org.lsst.ccs.subsystem.vacuum.constants
-
Defines the possible vacuum states
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.ConditionState
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.DeviceState
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.ImageChannel
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.LatchState
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.PLCState
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.SwitchEnable
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.SwitchState
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.VacuumAlert
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.VacuumState
-
Returns the enum constant of this type with the specified name.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.ConditionState
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.DeviceState
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.ImageChannel
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.LatchState
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.PLCState
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.SwitchEnable
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.SwitchState
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.VacuumAlert
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.subsystem.vacuum.constants.VacuumState
-
Returns an array containing the constants of this enum type, in
the order they are declared.