A B C D E F G H I L M N O P R S T U W

A

A1000Device - Class in org.lsst.ccs.subsystem.refrig

Handles a Yaskawa A1000 series variable frequency motor drive.

A1000Device() - Constructor for class org.lsst.ccs.subsystem.refrig.A1000Device

ALARM_ALL - Static variable in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Constants.

ALARM_HEATER - Static variable in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Constants.

B

BK1696Device - Class in org.lsst.ccs.subsystem.refrig

Handles a B&K model 1696 power supply device.

BK1696Device() - Constructor for class org.lsst.ccs.subsystem.refrig.BK1696Device

Constructor.

BK9130Device - Class in org.lsst.ccs.subsystem.refrig

Handles a B&K model 9130 power supply device.

BK9130Device() - Constructor for class org.lsst.ccs.subsystem.refrig.BK9130Device

Constructor.

BKXLNDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a B&K XLN series power supply device.

BKXLNDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.BKXLNDevice

Constructor.

build() - Method in class org.lsst.ccs.subsystem.refrig.EnthalpyExchangeChannel

build() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets up the fan speed control loop timer task.

build() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Starts the temperature control task.

build() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.SubCoolingChannel

build() - Method in class org.lsst.ccs.subsystem.refrig.SuperHeatChannel

build() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Build phase

build() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Starts the control loop iteration and temperature limit check tasks.

bulkPowerOff() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Turns off the bulk power supply.

bulkPowerOn() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Turns on the bulk power supply.

C

canClearAlert(Alert) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Enables an alert to be cleared.

canClearAlert(Alert, AlertState) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Callback to clear an Alert instance.

canClearAlert(Alert, AlertState) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Callback to clear an Alert instance.

CHAN_BYPASS_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

CHAN_COOLANT_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

CHAN_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

CHAN_FREQUENCY - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

CHAN_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

ChannelState() - Constructor for class org.lsst.ccs.subsystem.refrig.PowerDevice.ChannelState

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Checks a channel's parameters for validity.

checkHwLine(String, int) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Checks an output line number.

checkHwLine(String, int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Checks an output line number.

close() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

close() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Pre-closure cleanup.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

Pre-closure cleanup.

close() - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Closes device connection.

close() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Closes the connection.

cmprPowerChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

ColdCompressor - Class in org.lsst.ccs.subsystem.refrig

Controls a refrigeration cold compressor.

ColdCompressor() - Constructor for class org.lsst.ccs.subsystem.refrig.ColdCompressor

Constructor.

CompMaq20Device - Class in org.lsst.ccs.subsystem.refrig

Handles compressor MAQ20 DIOL and VO modules.

CompMaq20Device() - Constructor for class org.lsst.ccs.subsystem.refrig.CompMaq20Device

CompMaq20PWMControl - Class in org.lsst.ccs.subsystem.refrig

Compressor extension to MAQ20 PWM control.

CompMaq20PWMControl() - Constructor for class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

CompPlutoDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a compressor control Pluto PLC.

CompPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constructor.

Compressor - Class in org.lsst.ccs.subsystem.refrig

Controls a refrigeration compressor.

Compressor(CompState) - Constructor for class org.lsst.ccs.subsystem.refrig.Compressor

Constructor.

Compressor.LimitData - Class in org.lsst.ccs.subsystem.refrig

Compressor.SwitchDevice - Interface in org.lsst.ccs.subsystem.refrig

Compressor0 - Class in org.lsst.ccs.subsystem.refrig

Implements the refrigeration compressor subsystem.

Compressor0() - Constructor for class org.lsst.ccs.subsystem.refrig.Compressor0

connected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Listens for the arrival of the companion refrigeration subsystem.

connected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Listens for the arrival of the companion refrigeration subsystem.

connType - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

CryoCompressor - Class in org.lsst.ccs.subsystem.refrig

Controls a refrigeration cold compressor.

CryoCompressor() - Constructor for class org.lsst.ccs.subsystem.refrig.CryoCompressor

Constructor.

D

DcsDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a Sorensen DCS series power supply.

DcsDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.DcsDevice

Constructor.

devcId - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

devcParm - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

disable() - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

Disables the duty cycle setting.

disconnected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Listens for the departure of the companion refrigeration subsystem.

disconnected(AgentInfo...) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Listens for the departure of the companion refrigeration subsystem.

discPressChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

discTempChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

DL34970Device - Class in org.lsst.ccs.subsystem.refrig

Handles an Agilent 34970A data logger.

DL34970Device(String, String, int) - Constructor for class org.lsst.ccs.subsystem.refrig.DL34970Device

Constructor.

DL34970Device() - Constructor for class org.lsst.ccs.subsystem.refrig.DL34970Device

E

enable() - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

Enables the duty cycle setting.

enableOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Enables/disables the output of a set of channels.

enableOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Enables the output.

enterParameters() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

EnthalpyExchangeChannel - Class in org.lsst.ccs.subsystem.refrig

A derived channel to calculate enthalpy exchange

EnthalpyExchangeChannel() - Constructor for class org.lsst.ccs.subsystem.refrig.EnthalpyExchangeChannel

evaluateDerivedValue() - Method in class org.lsst.ccs.subsystem.refrig.EnthalpyExchangeChannel

evaluateDerivedValue() - Method in class org.lsst.ccs.subsystem.refrig.SubCoolingChannel

evaluateDerivedValue() - Method in class org.lsst.ccs.subsystem.refrig.SuperHeatChannel

F

FanControl - Class in org.lsst.ccs.subsystem.refrig

Implements a fan speed loop controller for the utility trunk system.

FanControl() - Constructor for class org.lsst.ccs.subsystem.refrig.FanControl

G

getBypassValve() - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Gets the bypass valve position.

getBypassValve() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Gets the bypass valve position.

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

getChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Command to get the list of channel names.

getConditionNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

getConditionState(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the state of a condition.

getConditionState(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the state of a condition.

getConnType() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the connection type.

getCoolantValve() - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Gets the coolant valve position.

getCoolantValve() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Gets the coolant valve position.

getDevcId() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the device ID.

getDevcParm() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the device parameter.

getErrorCode() - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the PLC error code.

getErrorCode() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the PLC error code.

getFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Gets the frequency.

getFrequency() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Gets the frequency.

getGain() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the gain.

getIndex() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Gets the compressor index.

getLatchNames() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

getLatchState(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the state of a latched condition.

getLatchState(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the state of a latched condition.

getMaxChannel() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the maximum channel number.

getMinChannel() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the minimum channel number.

getModIndex() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Gets the module index.

getOutput(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets the output state.

getOutput(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the output state.

getOutput(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Gets the power supply output state.

getPower(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the power for a channel.

getPowerChannel() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Gets the power channel,

getPowerChannel() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Gets the power channel,

getPowerDevice() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Gets the power device,

getPowerDevice() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Gets the power device,

getSetTemp() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the target temperature difference.

getState() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Gets the compressor state.

getSwitchNames() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to get the valid switch names.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Gets the state of the refrigeration module.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Gets the state of the heat exchanger module.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Gets the state of the refrigeration module.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Gets the full state of the refrigeration module.

getSystemState() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Gets the state of the thermal control system.

getTempChannelNames() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

getTimeConstant() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the time constant.

GP390Device - Class in org.lsst.ccs.subsystem.refrig

Handles an MKS GP390 vacuum gauge.

GP390Device(String, int) - Constructor for class org.lsst.ccs.subsystem.refrig.GP390Device

Constructor.

GP390Device() - Constructor for class org.lsst.ccs.subsystem.refrig.GP390Device

H

hasNoLoad(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets whether a "no load" error occurred.

hasNoLoad(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets whether a "no load" error occurred.

hasVoltError(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets whether a voltage setting error occurred.

hasVoltError(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets whether a voltage setting error occurred.

HeaterPIControl - Class in org.lsst.ccs.subsystem.refrig

Implements a temperature controller for the refrigeration system.

HeaterPIControl() - Constructor for class org.lsst.ccs.subsystem.refrig.HeaterPIControl

HeaterPsDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a SLAC heater power supply.

HeaterPsDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constructor.

HexMain - Class in org.lsst.ccs.subsystem.refrig

Implements the refrigeration heat exchanger monitoring subsystem.

HexMain() - Constructor for class org.lsst.ccs.subsystem.refrig.HexMain

Constructor.

I

init() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

init() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Life-cycle initialization.

init() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

Life-cycle initialization.

init() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

Life-cycle initialization.

initChannel(int, int, int) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Initializes a channel.

initChannel(String, int, int, int, int) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Initializes a channel.

initChannel(int, int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Initializes a channel.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Performs basic initialization.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Performs basic initialization.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Performs configuration.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Performs basic initialization.

initDevice() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Performs configuration.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Performs basic initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Post-connection initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

Post-connection initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Performs full initialization.

initialize() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Performs basic initialization.

initParams() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isEnabled(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Gets the enabled state of a set of channels.

isEnabled(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Gets the enabled state.

isEnterRequired() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isFaultDetected() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isHwLineSet(int) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Gets the set state of an output line.

isHwLineSet(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Gets the set state of an output line.

isLineOn(int) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

Gets the state of an output line.

isLoopActive() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Gets the control loop state.

isOverTemp() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Gets whether the temperature is over the limit.

isPLCActive() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Checks whether PLC is active

isReversePermitted() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isRunCmndFwdRev() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Gets the on state of a switch.

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Gets the on state of a switch.

isSwitchOn(int) - Method in interface org.lsst.ccs.subsystem.refrig.Compressor.SwitchDevice

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Gets the on state of a switch.

isSwitchOn(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Gets the on state of a switch.

L

LimitData() - Constructor for class org.lsst.ccs.subsystem.refrig.Compressor.LimitData

liquidTempChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

loadNamedConfig(String) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Loads a named refrigeration configuration.

M

maintainPower() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Maintains the power for all channels at their set values.

maintainPower() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Maintains the power for all channels at their set value.

maxCurrent - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

MCCDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a Measurement Computing DAQ box.

MCCDevice(String, String) - Constructor for class org.lsst.ccs.subsystem.refrig.MCCDevice

Constructor.

MCCDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.MCCDevice

minVoltage - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

MON_TYPE_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

MON_TYPE_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

MON_TYPE_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

mTypeMap - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

N

NETWORK_CONN_INVALID - Static variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

NUM_CHANS - Static variable in class org.lsst.ccs.subsystem.refrig.A1000Device

Constants

NUM_COLD_RTDS - Static variable in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

NUM_COLD_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

NUM_COLD_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

NUM_CRYO_RTDS - Static variable in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

NUM_CRYO_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

NUM_CRYO_SWITCHES - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

O

onAlert(AlertEvent) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Alert event handler.

onStatusMessage(StatusMessage) - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Handles refrigeration status messages.

onStatusMessage(StatusMessage) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Handles refrigeration status messages.

org.lsst.ccs.subsystem.refrig - package org.lsst.ccs.subsystem.refrig

P

phaseSepTempChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

postInit() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Initializes the compressor control.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Initializes the refrigeration subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Initializes the parameters.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Initializes the parameters.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Initializes the subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Initializes the refrigeration subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Initializes the refrigeration subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Initializes the thermal subsystem.

postInit() - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Initializes the parameters.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Starts the compressor control.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Starts the subsystem.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Starts the subsystem.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Starts the subsystem.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Starts the subsystem.

postStart() - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Starts the subsystem.

Power() - Constructor for class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Constructor.

PowerDevice - Class in org.lsst.ccs.subsystem.refrig

Defines a power supply interface.

PowerDevice(String, PowerSupplyDriver, int, int, int) - Constructor for class org.lsst.ccs.subsystem.refrig.PowerDevice

Constructor.

PowerDevice.ChannelState - Class in org.lsst.ccs.subsystem.refrig

Inner class for saving the power state of a channel.

processAlarm(int, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Handles alarm events.

processAlarm(int, int, String, String) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Handles alarm events.

processData(double[]) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Receives data periodically from the WattsUp? meter.

ProtPlutoDevice - Class in org.lsst.ccs.subsystem.refrig

Handles (minimally) a protection Pluto PLC system.

ProtPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.ProtPlutoDevice

Constructor.

psd - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

R

readBusVoltage() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.GP390Device

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Reads a channel.

readChannelGroup() - Method in class org.lsst.ccs.subsystem.refrig.DL34970Device

Reads grouped channels.

readChannelGroup() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads all heater channels as a group.

readChannelGroup() - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Initializes voltages and currents as unread.

readChannelGroup() - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Reads all referenced channels.

readChannelGroup() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Reads all referenced channels.

readChannelGroup() - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

Reads all referenced channels.

readCurrent() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readCurrent(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads the current.

readCurrent(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Reads the current.

readCurrent(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Gets the power supply current.

readFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readRegister(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readRegisters(int, int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readValue(int) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Reads an analog value.

readVoltage() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

readVoltage(int) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Reads the voltage.

readVoltage(int) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Reads the voltage.

readVoltage(int) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Gets the power supply voltage.

RefrigMain - Class in org.lsst.ccs.subsystem.refrig

Implements the refrigeration compressor subsystem.

RefrigMain() - Constructor for class org.lsst.ccs.subsystem.refrig.RefrigMain

Constructor.

RefrigMain1 - Class in org.lsst.ccs.subsystem.refrig

Implements the basic refrigeration subsystem.

RefrigMain1() - Constructor for class org.lsst.ccs.subsystem.refrig.RefrigMain1

reset() - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Resets the latches.

reset() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Resets the PI controller.

reset() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Resets the controller.

resetLatches() - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Resets all latched conditions.

resetLatches() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to reset the latches.

resetLatches() - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Resets all latches.

restart() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Restarts the control loop.

runForward() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

runReverse() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

S

saveNamedConfig(String) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Saves a named refrigeration configuration.

saveParameters() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setAccessLevel(A1000.AccessLevel) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setAlarmDisabled(int) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Sets the alarm disabled state on or off.

setAuxHeaterPower(int, double) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets an aux heater power value.

setAuxHeaterState(int, int) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets an aux heater state.

setBaudRate(A1000.BaudRate) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setBypassValve(double) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Sets the bypass valve position.

setBypassValve(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to set the cold bypass valve position.

setBypassValve(double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Sets the bypass valve position.

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20Device

setChannelValue(String, double) - Method in class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

Command to set a channel value.

setClosed() - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Changes the WattsUp? meter open state.

setCmprPowerDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the compressor power delayed limit.

setCmprPowerDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the compressor power delay.

setCmprPowerEnable(int, int) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Sets the power state of a compressor.

setCmprPowerImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the compressor power immediate limit.

setColdPowerWeights(double[]) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets cold trim heat power weight factors.

setCompPowerEnable(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Sets the compressor power state.

setCondition(String, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setControlMode(A1000.ControlMode) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setCoolantValve(double) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Sets the coolant valve position.

setCoolantValve(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to set the cold coolant valve position.

setCoolantValve(double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Sets the coolant valve position.

setCryoPowerWeights(double[]) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets cryo trim heat power weight factors.

setCurrent(int, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the current.

setCurrent(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the current.

setCurrent(int, double) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Sets the power supply current.

setDiscPressDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge pressure delayed limit.

setDiscPressDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge pressure delay.

setDiscPressImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge pressure immediate limit.

setDiscTempDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge temperature delayed limit.

setDiscTempDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge temperature delay.

setDiscTempImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge temperature immediate limit.

setDiscTempLowImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge temperature low immediate limit.

setDutyCycle1(double) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20PWMControl

Sets duty cycle 1.

setDutyCycle1(double) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

Sets duty cycle 1.

setEnterRequired(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setErrorAction(A1000.ErrorAction) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setFaultDetected(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setFreqRefSrc(A1000.FreqRefSrc) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

Sets the frequency.

setFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.SimA1000Device

Sets the frequency.

setGain(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets the gain.

setHeaterControl(int) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Sets the heater control state.

setHeaterPower(double) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Sets the heater power value.

setHeaterPowerEnable(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Sets the heater power state.

setHeaterPowerEnable(int) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Sets the heater power enable state.

setHwLine(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.MCCDevice

Sets an output line on or off.

setHwLine(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Sets an output line on or off.

setIndex(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the compressor index.

setInputVoltage(double) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setLatchActive(String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setLatchLatched(String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setLatchWarning(String) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setLineOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

Sets the state of an output line.

setLiquidTempDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the liquid temperature delayed limit.

setLiquidTempDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the liquid temperature delay.

setLiquidTempImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the liquid temperature immediate limit.

setLoadFract(double) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice

Sets the load power fraction

setLoadTemp(double) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Sets the load temperature value.

setNamedSwitchOn(String, boolean) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to turn a named switch on or off..

setNodeAddress(int) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setOnline(boolean) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the online state.

setOpState(TrimHeaterOpState) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the operation state.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the output state.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the output state.

setOutput(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Sets the power supply output state.

setParity(A1000.Parity) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setPhaseSepTempDelayLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the phase separator temperature delayed limit.

setPhaseSepTempDelayTime(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the phase separator temperature delay.

setPlateTemperature(int, double) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets a plate temperature value.

setPLCActive(boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

setPower(int, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the power for a set of channels.

setPower(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the power.

setPower(double) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the constant power value.

setPowered(boolean) - Method in class org.lsst.ccs.subsystem.refrig.WUDevice

Changes the WattsUp? meter powered state.

setPressDiffImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the discharge pressure difference immediate limit.

setReversePermitted(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setRunCmndFwdRev(boolean) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setRunCmndSrc(A1000.RunCmndSrc) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setRunProg(A1000.RunProg) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setSetTemp(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets the target temperature difference.

setStopMethod(A1000.StopMethod) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setSuctTempImmedLimit(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Sets the suction temperature immediate limit.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Sets a switch on or off.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Sets a switch on or off.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to turn a switch on or off..

setSwitchOn(int, boolean) - Method in interface org.lsst.ccs.subsystem.refrig.Compressor.SwitchDevice

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Sets a switch on or off.

setSwitchOn(int, boolean) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Sets a switch on or off.

setTemp(double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Sets the target temperature.

setTemp(double) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the target temperature.

setTempWeight(String, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Sets a temperature weight.

setTempWeight(String, double) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets a temperature weight.

setTempWeights(Map<String, Double>) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Sets the temperature weights.

setTempWeights(Map<String, Double>) - Method in class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

Sets the temperature weights.

setTimeConstant(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Sets the time constant.

settlingTime - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

setTrimHeaterPower(int, double) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets a trim heater power value.

setTrimHeaterState(int, TrimHeaterOpState) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets a trim heater operation state.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Sets the compressor type.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Sets the compressor type.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

Sets the compressor type.

setType(int) - Method in class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Sets the compressor type.

setUpdatePeriod(int) - Method in class org.lsst.ccs.subsystem.refrig.Compressor0

Sets the monitor update period.

setUpdatePeriod(int) - Method in class org.lsst.ccs.subsystem.refrig.HexMain

Sets the monitor update period.

setUpdatePeriod(int) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain

Sets the monitor update period.

setUpdatePeriod(int) - Method in class org.lsst.ccs.subsystem.refrig.RefrigMain1

Sets the monitor update period.

setUpdatePeriod(int) - Method in class org.lsst.ccs.subsystem.refrig.ThermalMain

Sets the monitor update period.

setVfdFrequency(double) - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Command to set the cold VFD frequency.

setVfSelection(A1000.VfSelection) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

setVoltage(int, double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Sets the voltage.

setVoltage(int, double) - Method in class org.lsst.ccs.subsystem.refrig.PowerDevice

Sets the voltage.

setVoltage(int, double) - Method in class org.lsst.ccs.subsystem.refrig.SimDevice.Power

Sets the power supply voltage.

setVoltageUnits(A1000.VoltageUnits) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showAccessLevel() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showBaudRate() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showControlMode() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showDriveStatus() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showErrorAction() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFreqRefSrc() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFrequency() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showFrequencyApp() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showInputVoltage() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showNodeAddress() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showParity() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showRunCmndSrc() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showRunProg() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showStopMethod() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showVfSelection() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

showVoltageUnits() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

SimA1000Device - Class in org.lsst.ccs.subsystem.refrig

Handles a Simulated Yaskawa A1000 series variable frequency motor drive.

SimA1000Device() - Constructor for class org.lsst.ccs.subsystem.refrig.SimA1000Device

SimCompMaq20Device - Class in org.lsst.ccs.subsystem.refrig

Handles the simulated compressor MAQ20 device.

SimCompMaq20Device() - Constructor for class org.lsst.ccs.subsystem.refrig.SimCompMaq20Device

SimCompMaq20PWMControl - Class in org.lsst.ccs.subsystem.refrig

Compressor extension to MAQ20 PWM control.

SimCompMaq20PWMControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimCompMaq20PWMControl

SimCompPlutoDevice - Class in org.lsst.ccs.subsystem.refrig

Simulates the compressor Pluto PLC.

SimCompPlutoDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimCompPlutoDevice

Constructor.

SimDevice - Class in org.lsst.ccs.subsystem.refrig

Simulates the refrigeration hardware.

SimDevice(String, String) - Constructor for class org.lsst.ccs.subsystem.refrig.SimDevice

Constructor.

SimDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimDevice

SimDevice.Power - Class in org.lsst.ccs.subsystem.refrig

Inner class to simulate power supply device with attached load.

SimMaq20AnalogControl - Class in org.lsst.ccs.subsystem.refrig

Handles a simulated Dataforth Maq20 system analog output module.

SimMaq20AnalogControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

SimMaq20Device - Class in org.lsst.ccs.subsystem.refrig

Handles the simulated MAQ20 device.

SimMaq20Device() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20Device

SimMaq20DiscControl - Class in org.lsst.ccs.subsystem.refrig

Handles a simulated Dataforth Maq20 system discrete output module.

SimMaq20DiscControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20DiscControl

SimMaq20PulseControl - Class in org.lsst.ccs.subsystem.refrig

Handles a simulated Dataforth Maq20 system pulse control channel.

SimMaq20PulseControl() - Constructor for class org.lsst.ccs.subsystem.refrig.SimMaq20PulseControl

SimpleSimDevice - Class in org.lsst.ccs.subsystem.refrig

Implements a simple simulated device.

SimpleSimDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.SimpleSimDevice

SimPowerDevice - Class in org.lsst.ccs.subsystem.refrig

Implementation of a simulated power supply device.

SimPowerDevice(double[]) - Constructor for class org.lsst.ccs.subsystem.refrig.SimPowerDevice

Constructor.

softMaxCurrent - Variable in class org.lsst.ccs.subsystem.refrig.PowerDevice

start(double) - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Starts the control loop.

startLoop(double) - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Starts the control loop.

startLoop() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Starts the control loop.

stop() - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

stop() - Method in class org.lsst.ccs.subsystem.refrig.HeaterPIControl

Stops the control loop.

stopLoop() - Method in class org.lsst.ccs.subsystem.refrig.FanControl

Stops the control loop.

SubCoolingChannel - Class in org.lsst.ccs.subsystem.refrig

A Derived channel to calculate sub cooling

SubCoolingChannel() - Constructor for class org.lsst.ccs.subsystem.refrig.SubCoolingChannel

suctPressChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

suctTempChan - Variable in class org.lsst.ccs.subsystem.refrig.Compressor

SuperHeatChannel - Class in org.lsst.ccs.subsystem.refrig

A Derived channel to calculate superheat

SuperHeatChannel() - Constructor for class org.lsst.ccs.subsystem.refrig.SuperHeatChannel

SW_BYPASS_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SW_COOLANT_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SW_ENABLE - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

SW_HEATER - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

SW_LIGHTS - Static variable in class org.lsst.ccs.subsystem.refrig.CompPlutoDevice

Constants.

SW_ORIFICE_VALVE - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

SW_SURGE_HEATER - Static variable in class org.lsst.ccs.subsystem.refrig.CompMaq20Device

Constants.

T

ThermalMain - Class in org.lsst.ccs.subsystem.refrig

Implements the refrigeration thermal control subsystem.

ThermalMain() - Constructor for class org.lsst.ccs.subsystem.refrig.ThermalMain

TrimHeaterControl - Class in org.lsst.ccs.subsystem.refrig

Implements a temperature controller for the refrigeration system.

TrimHeaterControl() - Constructor for class org.lsst.ccs.subsystem.refrig.TrimHeaterControl

TYPE_CURRENT - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_CURR - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_STATUS - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_TEMP - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_MAIN_VOLTS - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_TEMP - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_TOTAL_POWER - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

TYPE_VOLTAGE - Static variable in class org.lsst.ccs.subsystem.refrig.HeaterPsDevice

Constants.

U

updateSystem() - Method in class org.lsst.ccs.subsystem.refrig.Compressor

Updates the compressor system.

W

writeRegisters(int, int...) - Method in class org.lsst.ccs.subsystem.refrig.A1000Device

writeValue(int, double) - Method in class org.lsst.ccs.subsystem.refrig.SimMaq20AnalogControl

Writes an analog value.

WUDevice - Class in org.lsst.ccs.subsystem.refrig

Handles a WattsUp power meter.

WUDevice() - Constructor for class org.lsst.ccs.subsystem.refrig.WUDevice

A B C D E F G H I L M N O P R S T U W