A B C D E G H I L N O P R S T U V W

A

AdcData(int, int, double, CCSTimeStamp) - Constructor for class org.lsst.ccs.subsystem.rafts.REBDevice.AdcData

AF1 - Static variable in class org.lsst.ccs.subsystem.rafts.AspicControl

AspicControl - Class in org.lsst.ccs.subsystem.rafts

Implements control of an ASPIC.

AspicControl() - Constructor for class org.lsst.ccs.subsystem.rafts.AspicControl

B

BiasControl - Class in org.lsst.ccs.subsystem.rafts

Implements control of CCD biases and CS gate.

BiasControl() - Constructor for class org.lsst.ccs.subsystem.rafts.BiasControl

Constructor.

C

CHAN_HTR_POWER - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

CHAN_HTR_VOLTS - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

CHAN_RTD_INT_TEMP - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

CHAN_RTD_INT_VOLT - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

CHAN_TOTAL_POWER - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

checkAspics() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Checks loaded ASPIC configuration data.

checkBiasStepLimits(double[], List<String>) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Measure BiasDac offsets to prepare for a jump

checkChannel(Channel) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Checks a channel's parameters for validity.

checkClockStepLimits(double[], List<String>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Measure ClockDac offsets to prepare for a jump

checkConfig() - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Checks configuration.

checkConfig() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Checks configuration.

checkConfig() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Checks configuration.

checkDacsCalibration() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Get voltage differences between setpoint and readback for Bias and Clock rails to assist with calibration of setpoint to raw ADC conversion

CLAMP - Static variable in class org.lsst.ccs.subsystem.rafts.AspicControl

clear(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Clears (zeroes) all DAC values sequenced as pairs on the REB.

clearUpdateCCDsPowerState() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

close() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Closes the connection.

configCcdMask - Variable in class org.lsst.ccs.subsystem.rafts.REBDevice

configurationChanged(ConfigurationInfo, ConfigurationInfo, ConfigurationListener.ConfigurationOperation) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Triggers activities when configuration is changed 1st use is to update CCDsPowerState if relevant parameters changed

configure(Monitor, Device) - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Configures channel description.

configure(Monitor, Device) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Configures channel description.

configure(Monitor, Device) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Configures DAC description.

CS_GATE - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

CS_GATE - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

CS_GATE_P - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

D

DacControl - Class in org.lsst.ccs.subsystem.rafts

Implements control of the DACs on a REB.

DacControl() - Constructor for class org.lsst.ccs.subsystem.rafts.DacControl

Constructor

disableBackBias(boolean, String) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Disable/Enable the back bias switch.

E

enableScan(boolean) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Enables or disables scan mode.

G

GAIN - Static variable in class org.lsst.ccs.subsystem.rafts.AspicControl

GD - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

GD_P - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

getAdcName(int) - Static method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the name of of a slow ADC.

getAf1() - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

getBiasDacsPowerState(double[], List<String>) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Checks whether Bias voltage values are ON, OFF, DELTA

getCcdMask() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the mask of CCDs being used.

getCCDsPowerState() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

measure power state of ccds, user version turns off CCDs on error

getCcdType() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the CCD type.

getChanged() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the changed variable value

getChanged() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the changed variable value

getClamp() - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

getClockDacsPowerState(double[], List<String>, double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Checks that 6 clock Dacs are within tolerance of zero (eg.

getCsGate() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Current Source gate DAC value.

getCsGate() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

getCsGateP() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Current Source gate current.

getDataSource() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the data source.

getErrorAddr() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets error address.

getFunctionMap() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the map of functions.

getGain() - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

getGd() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Guard Diode DAC value.

getGdP() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Guard Diode voltage.

getGroupForChannel(Channel) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

getHdwType() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the hardware type.

getHwCcdType() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the hardware CCD type.

getHwVersion(Aspic) - Static method in class org.lsst.ccs.subsystem.rafts.AspicControl

Gets the hardware version.

getHwVersion() - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Deprecated.

getHwVersion(BoardDacs) - Static method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the hardware version.

getHwVersion() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Deprecated.

getHwVersion(BoardDacs) - Static method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the hardware version.

getHwVersion() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Deprecated.

getHwVersion() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the hardware version.

getId() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the REB ID.

getIfcName() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the network interface name.

getImageRegisters() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the array of image parameter registers to be read

getImageRegisters(String[], boolean) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the array of image parameter register addresses to be read

getMainMap() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the map of main programs.

getMains() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the list of main programs.

getMaxDelta() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Get config param maxDelta

getMaxStep() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Get config param maxStep

getMinTol() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Get config param minTol

getMonitorTasks() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

getOd() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Output Drain DAC value.

getOdP() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Output Drain voltage.

getOg() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Output Gate DAC value.

getOgP() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Output Gate voltage.

getOgSh() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Output Gate shift DAC value.

getParameter(String) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets a parameter value.

getPclkHigh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high parallel clock rail DAC value.

getPclkHighP() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high parallel clock rail voltage.

getPclkHighSh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high parallel clock rail shift DAC value.

getPclkLow() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low parallel clock rail DAC value.

getPclkLowP() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low parallel clock rail voltage.

getPclkLowSh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low parallel clock rail shift DAC value.

getPointers() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the map of pointer information.

getRaftNumber() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the raft number.

getRc() - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

getRd() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Reset Drain DAC value.

getRdP() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the Reset Drain voltage.

getREBConfig() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the REB configuration data.

getRebGeometry() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

getRebNumber() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the REB number.

getRebStatus() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the REB status block.

getRebType() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the REB type.

getRegister(int, int) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the contents of REB registers.

getRgHigh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high reset gate rail DAC value.

getRgHighP() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high reset gate rail voltage.

getRgHighSh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high reset gate rail shift DAC value.

getRgLow() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low reset gate rail DAC value.

getRgLowP() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low reset gate rail voltage.

getRgLowSh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low reset gate rail shift DAC value.

getSclkHigh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high serial clock rail DAC value.

getSclkHighP() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high serial clock rail voltage.

getSclkHighSh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the high serial clock rail shift DAC value.

getSclkLow() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low serial clock rail DAC value.

getSclkLowP() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low serial clock rail voltage.

getSclkLowSh() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the low serial clock rail shift DAC value.

getSequencer() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the associated sequencer.

getSerialNumber() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the serial number.

getSubroutineMap() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the map of subroutines.

getTime() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the time base as Unix time.

getTime(String) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

getTm() - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

getUnders() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the bit mask of DAC channels under threshold

getUpdateCCDsPowerState() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

H

hdwTypeI - Variable in class org.lsst.ccs.subsystem.rafts.REBDevice

hwVersion - Variable in class org.lsst.ccs.subsystem.rafts.REBDevice

I

initChannel(Channel) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Initializes a channel (in this case only checks HW channel number).

initDevice() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Performs basic initialization.

initialize() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Performs full initialization.

isBackBiasDisabled() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Check if the back bias switch has been disabled.

isBackBiasOn() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets the back bias on state.

isRaw() - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Gets the raw state.

isRaw() - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Gets the raw state.

isRunning() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Checks whether the sequencer is running.

isScanEnabled() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Gets the scan mode enabled state.

isSerialNumValid() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Gets whether the serial number is valid.

L

loadAspics(boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Loads configuration data to the ASPICs.

loadChanged(boolean, List<REBDevice.AdcData>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Loads changed configured DAC values onto the REB.

loadChanged(int, boolean, List<REBDevice.AdcData>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Loads changed configured DAC values onto the REB.

loadConfig(boolean, List<REBDevice.AdcData>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Loads configured DAC values onto the REB.

loadConfig(int, boolean, boolean, List<REBDevice.AdcData>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Loads configured DAC values onto the REB.

loadDeltaDacs(boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Loads configured bias and clcock DAC values.

loadSequencer(String) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Loads the sequencer from a file.

loadSequencer(InputStream) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Loads a sequencer from an input string.

loadSequencer(FPGA2Model) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Load the sequencer from a compiled FPGA model.

N

NUM_HTR_CHANS - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

NUM_RTD_CHANS - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

O

OD - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

OD_P - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

OG - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

OG_P - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

OG_SH - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

org.lsst.ccs.subsystem.rafts - package org.lsst.ccs.subsystem.rafts

P

pauseMonitorTasks(String...) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

PCLK_HIGH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

PCLK_HIGH_P - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

PCLK_HIGH_SH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

PCLK_LOW - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

PCLK_LOW_P - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

PCLK_LOW_SH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

postStart() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

powerCCDs(boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Performs CCD power on/off sequences.

powerCCDsOff() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Performs CCD power off sequence.

powerCCDsOn() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Performs CCD power on sequence.

R

RAFTS - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

RAFTS_LIMITS - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

RAFTS_POWER - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

RC - Static variable in class org.lsst.ccs.subsystem.rafts.AspicControl

RD - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

RD_P - Static variable in class org.lsst.ccs.subsystem.rafts.BiasControl

Constants.

readAllAdcs(List<REBDevice.AdcData>) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Reads all the ADCs and adds them to data list.

readChannel(Channel) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Reads a channel.

readChannelGroup(String) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

readPowerAdcs() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Reads the board power ADCs.

readPowerAdcs(List<REBDevice.AdcData>) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Reads the board power ADCs and adds them to data list.

readSeqIdleState() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Reads the sequencer idle state lines.

readSlowAdcs(List<REBDevice.AdcData>) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Reads the clock and bias voltage slow ADCs and adds them to data list.

realCcdMask - Variable in class org.lsst.ccs.subsystem.rafts.REBDevice

REBDevice - Class in org.lsst.ccs.subsystem.rafts

Implements access to a REB device.

REBDevice(int) - Constructor for class org.lsst.ccs.subsystem.rafts.REBDevice

Constructor

REBDevice.AdcData - Class in org.lsst.ccs.subsystem.rafts

resetAspics() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Resets the ASPICs.

resetError() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Resets error state.

resetFrontEnd() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Resets the front end.

resetScan() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Resets scan mode.

resumeMonitorTasks(String...) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

RG_HIGH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

RG_HIGH_P - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

RG_HIGH_SH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

RG_LOW - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

RG_LOW_P - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

RG_LOW_SH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

S

SCLK_HIGH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

SCLK_HIGH_P - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

SCLK_HIGH_SH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

SCLK_LOW - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

SCLK_LOW_P - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

SCLK_LOW_SH - Static variable in class org.lsst.ccs.subsystem.rafts.DacControl

sendStep() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Sends a sequencer step command.

sendStop() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Sends a sequencer stop command.

SequencerProc - Class in org.lsst.ccs.subsystem.rafts

Routines for accessing a REB sequencer.

SequencerProc(BaseSet) - Constructor for class org.lsst.ccs.subsystem.rafts.SequencerProc

Constructor.

setAf1(int) - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Sets/gets the af1 (force first-stage gain to 1) value.

setAllAspic(String, int, boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

setAllAspicGain(int) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Transversal setting of all Gains for the Aspics of this reb.

setAllAspicRc(int) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Transversal setting of all Rcs for the Aspics of this reb.

setAllAspicTM(boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Transversal setting of all TM for the Aspics of this reb.

setBackBias(boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Turns back bias on or off.

setBiasDacsCalibration(double[], List<String>, boolean) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Measure and Set BiasDac Calibration to converge measured and configured voltages

setCCDClocksLow() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets Sequencer Clock lines to low state Corrupts the sequencer file -- needs strategy revision Needed in [WG]REB power management but incomplete

setCcdMask(int) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Sets the mask of CCDs being used.

setCcdType(CCDType) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets the CCD type.

setClamp(int) - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Sets/gets the clamp mask.

setClientFactory(ClientFactory) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets the client factory.

setClockDacsCalibration(double[], List<String>, boolean) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Measure and Set ClockDac offsets to converge measured and configured voltages

setCsGate(int) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Current Source gate DAC value.

setCsGate(int[]) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets/Gets the current source gates.

setCsGateP(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Current Source gate current.

setDataSource(int) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Sets the data source.

setFitsConditions(String, double, double) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets the FITS file test conditions.

setGain(int) - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Sets/gets the gain.

setGd(int) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Guard Diode DAC value.

setGdMax(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Guard Diode voltage maximum.

setGdMin(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Guard Diode voltage minimum.

setGdP(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Guard Diode voltage.

setHeater(int, double) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets a heater voltage.

setHeaterPower(int, double) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets heater power.

setIfcName(String) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

setOd(int) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Drain DAC value.

setOdMax(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Drain voltage maximum.

setOdMin(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Drain voltage minimum.

setOdP(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Drain voltage.

setOg(int) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Gate DAC value.

setOgMax(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Gate voltage maximum.

setOgMin(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Gate voltage minimum.

setOgP(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Gate voltage.

setOgSh(int) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Output Gate shift DAC value.

setOnline(boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

setParameter(String, int) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Sets a parameter value.

setParameterBulk(Map<String, Object>) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Augments setting of parameters to trigger CCDsPowerState update Parameters are set by ConfigurationChanger methods If parameters match the pattern the rebDevice updateCCDsPowerState flag is set If parameters match the pattern the matching bits in this.changed are set

setParameterBulk(Map<String, Object>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Augments setting of parameters to trigger CCDsPowerState update Parameters are actually set by ConfigurationChanger methods

setPclkHigh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high parallel clock rail DAC value.

setPclkHighMax(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high parallel clock rail voltage maximum.

setPclkHighMin(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high parallel clock rail voltage minimum.

setPclkHighP(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high parallel clock rail voltage.

setPclkHighSh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high parallel clock rail shift DAC value.

setPclkLow(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low parallel clock rail DAC value.

setPclkLowMax(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low parallel clock rail voltage maximum.

setPclkLowMin(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low parallel clock rail voltage minimum.

setPclkLowP(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low parallel clock rail voltage.

setPclkLowSh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low parallel clock rail shift DAC value.

setRc(int) - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Sets/gets the rc value.

setRd(int) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Reset Drain DAC value.

setRdMax(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Reset Drain voltage maximum.

setRdMin(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Reset Drain voltage minimum.

setRdP(double) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Sets the Reset Drain voltage.

setREBConfig(REB) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets the REB configuration data.

setRebGeometry(Reb) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

setRegister(int, int[]) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets the contents of REB registers.

setRgHigh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high reset gate rail DAC value.

setRgHighMax(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high reset gate rail voltage maximum.

setRgHighMin(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high reset gate rail voltage minimum.

setRgHighP(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high reset gate rail voltage.

setRgHighSh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high reset gate rail shift DAC value.

setRgLow(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low reset gate rail DAC value.

setRgLowMax(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low reset gate rail voltage maximum.

setRgLowMin(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low reset gate rail voltage minimum.

setRgLowP(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low reset gate rail voltage.

setRgLowSh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low reset gate rail shift DAC value.

setScienceCCD(boolean) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets whether a science CCD is being used on a WREB.

setSclkHigh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high serial clock rail DAC value.

setSclkHighMax(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high serial clock rail voltage maximum.

setSclkHighMin(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high serial clock rail voltage minimum.

setSclkHighP(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high serial clock rail voltage.

setSclkHighSh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the high serial clock rail shift DAC value.

setSclkLow(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low serial clock rail DAC value.

setSclkLowMax(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low serial clock rail voltage maximum.

setSclkLowMin(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low serial clock rail voltage minimum.

setSclkLowP(double) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low serial clock rail voltage.

setSclkLowSh(int) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Sets the low serial clock rail shift DAC value.

setStart(String) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Sets the sequencer start address.

setStart(int) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Sets the sequencer start address.

setTime() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Sets the time base to the current system time.

setTm(int) - Method in class org.lsst.ccs.subsystem.rafts.AspicControl

Sets/gets the tm (transparent mode) value.

setUpdateCCDsPowerState() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

simulateDisconnection() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Simulate a disconnect

startSequencer() - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Starts the sequencer.

T

testCCDShorts() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Performs CCD shorts test.

testShorts(List<REBDevice.AdcData>, List<String>) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Tests for biases shorts.

testShorts(List<REBDevice.AdcData>, List<String>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Tests for clock lines shorts.

TM - Static variable in class org.lsst.ccs.subsystem.rafts.AspicControl

triggerMonitorTasks(String...) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_ASP_TEMP - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_BD_POWER - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_BD_TEMP - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_BIAS_VOLT - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_CCD_CURR - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_CR_VOLT - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_HEATER - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_HV_SWITCH - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

TYPE_RTD - Static variable in class org.lsst.ccs.subsystem.rafts.REBDevice

U

updateDacsCalibration() - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Get voltage differences between setpoint and readback for Bias and Clock rails to assist with calibration of setpoint to raw ADC conversion

V

validateBulkChange(Map<String, Object>) - Method in class org.lsst.ccs.subsystem.rafts.BiasControl

Validates configuration parameter change.

validateBulkChange(Map<String, Object>) - Method in class org.lsst.ccs.subsystem.rafts.DacControl

Validates configuration changes

validateBulkChange(Map<String, Object>) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Validates configuration parameter change.

W

waitDone(int) - Method in class org.lsst.ccs.subsystem.rafts.SequencerProc

Waits for the sequencer to be done (idle)

writeSeqIdleState(int) - Method in class org.lsst.ccs.subsystem.rafts.REBDevice

Writes the sequencer idle state lines.

A B C D E G H I L N O P R S T U V W