A C D E G I K L M N O P R S T U

A

abort() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

abort() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

abort any motion **************************************************************************

abortMotion() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

/** Plot the scan data

AerotechDevice - Interface in org.lsst.ccs.subsystem.metrology

Defines an Aerotech device interface.

AerotechP165Device - Class in org.lsst.ccs.subsystem.metrology

AerotechP165 device class for the metrology subsystem * @author: Homer Neal **************************************************************************

AerotechP165Device(String, int) - Constructor for class org.lsst.ccs.subsystem.metrology.AerotechP165Device

AerotechP165Device constructor - put AerotechP165 in initial subsystem state

AerotechP165Device() - Constructor for class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Constructor * **************************************************************************

C

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Checks a channel's parameters for validity.

checkChannel(String, int, String, String) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

Checks a channel's parameters for validity.

close() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Closes the connection.

close() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

Closes the connection.

commmode() - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

commmode() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

communications mode **************************************************************************

configure(Monitor) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Performs configuration.

configure(Monitor) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

Performs configuration.

connecting(AgentInfo) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigCatcher

D

disableAxes() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

disableAxes() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

disable axes **************************************************************************

disconnecting(AgentInfo) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigCatcher

doreps(String, int, double) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform repetitions - repeated measurements at the same positions

E

enableAxes() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

enableAxes() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

enable axes **************************************************************************

G

genmode() - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

genmode() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

general mode **************************************************************************

getcycles() - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

getcycles() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

return the sampling cycle setting being used for the displacement measurements **************************************************************************

getError() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getError() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

get errors **************************************************************************

getError() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

get errors **************************************************************************

getFullState() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Gets the full state of the aerotech module.

getLast_read() - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

getLast_read() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

getLastPos_x() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getLastPos_x() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

return last x position **************************************************************************

getLastPos_y() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getLastPos_y() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

return last y position **************************************************************************

getLastPos_z() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getLastPos_z() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

return last z position **************************************************************************

getmeasmode() - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

getmeasmode() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

return the sensing mode **************************************************************************

getPos_x() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getPos_x() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

get x position **************************************************************************

getPos_xyz() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getPos_xyz() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

get xyz position **************************************************************************

getPos_y() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getPos_y() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

get y position **************************************************************************

getPos_z() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getPos_z() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

get z position **************************************************************************

getState() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

getState() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

getState() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Gets the operating state word.

getTeststandc() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

getVersion() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

getVersion() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

gets version of the Ensemble controller * **************************************************************************

getVersion() - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

getVersion() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

gets version of the Ensemble controller * **************************************************************************

goHome() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

goHome() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

go to home position **************************************************************************

I

initCatcher(ConfigurationInfo) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigCatcher

initChannel(int, int, int) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Initializes a channel.

initChannel(int, int, int) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

Initializes a channel.

initialize() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Initializes the device **************************************************************************

initialize() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

Initializes the device **************************************************************************

initModule() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Initializes the aerotech subsystem.

K

KeyenceDevice - Interface in org.lsst.ccs.subsystem.metrology

Defines an Aerotech device interface.

KeyenceG5001Device - Class in org.lsst.ccs.subsystem.metrology

KeyenceG5001 device class for the metrology subsystem * @author: Homer Neal **************************************************************************

KeyenceG5001Device(String, int) - Constructor for class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

KeyenceG5001Device constructor - put KeyenceG5001 in initial subsystem state

KeyenceG5001Device() - Constructor for class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

Constructor * **************************************************************************

L

laser(boolean) - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

laser(boolean) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

laser on/off **************************************************************************

M

MetrologyConfigCatcher - Class in org.lsst.ccs.subsystem.metrology

Catches configuration changes to the Metrology Subsystem

MetrologyConfigCatcher() - Constructor for class org.lsst.ccs.subsystem.metrology.MetrologyConfigCatcher

MetrologyConfigCatcher(MetrologyConfig) - Constructor for class org.lsst.ccs.subsystem.metrology.MetrologyConfigCatcher

MetrologyConfigurable - Class in org.lsst.ccs.subsystem.metrology

MetrologyConfigurable(String, double, double, double, double, double, double, double, double, int, int, double, double) - Constructor for class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

MetrologySubSys - Class in org.lsst.ccs.subsystem.metrology

Implements the metrology subsystem for use with Aerotech positioners subsystem.

MetrologySubSys(String, int, String) - Constructor for class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Main constructor.

moveAbs_x(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveAbs_x(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*absolute move **************************************************************************

moveAbs_xy(double, double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveAbs_xy(double, double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*absolute move in x and y **************************************************************************

moveAbs_xyz(double, double, double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveAbs_xyz(double, double, double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*absolute move in , y and z **************************************************************************

moveAbs_y(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveAbs_y(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*absolute move **************************************************************************

moveAbs_z(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveAbs_z(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*absolute move **************************************************************************

moveInc_x(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveInc_x(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

moveInc_x: perform incremental move **************************************************************************

moveInc_xy(double, double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveInc_xy(double, double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*incremental move in x and y **************************************************************************

moveInc_xyz(double, double, double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveInc_xyz(double, double, double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

moveInx_xyz: incremental move in , y and z **************************************************************************

moveInc_y(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveInc_y(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*incremental move **************************************************************************

moveInc_z(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

moveInc_z(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

*incremental move **************************************************************************

N

noStepScan(String) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform scan

noStepScan(String, double, double, double, double, double, double) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform scan

noStepScan(String, double, double, double, double, double, double, double) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform scan

O

onStatusMessage(StatusMessage) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigCatcher

org.lsst.ccs.subsystem.metrology - package org.lsst.ccs.subsystem.metrology

P

plotscan() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

/** Plot the scan data

plotscan(double, double, double) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

printFullState() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Prints the full state of aerotech * * **************************************************************************

processAlarm(int, int) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Handles alarm events.

publishState() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Publishes the state of the aerotech This is intended to be called whenever any element of the state is * changed.

R

rampRate(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

rampRate(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

rampRate: step/s^2 **************************************************************************

read(int) - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

read(int) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

read the distance from the Keyence head **************************************************************************

readAll() - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

readAll() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

read the distance from the Keyence head **************************************************************************

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Reads a channel.

readChannel(int, int) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

Reads a channel.

reinit() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

reinit devices

reset() - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

reset() - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

reset **************************************************************************

reset() - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

reset **************************************************************************

resetTrip() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

S

saveConfiguration() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Saves the configuration data.

scan() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform scan

scan(String, double, double, double, double, double, double) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform scan

scan(String, double, double, double, double, double, double, double) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform scan

scanfl(String) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Perform scan to a specified file

sendSyncMetrologyCommand(String, Object...) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

setAcceleration(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setCfgState(int) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

setCornerang(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setcycles(int) - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

setcycles(int) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

set the sampling cycle mode to be used for the displacement measurements **************************************************************************

setdX(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setdY(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setmeasmode(int) - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

setmeasmode(int) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

set the sensing mode 0: Normal, 1: Translucent object, 2: Transparent object, 3: Transparent object 2, 4: Semi opaque **************************************************************************

setMeasmode(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setmindispunit(int) - Method in interface org.lsst.ccs.subsystem.metrology.KeyenceDevice

setmindispunit(int) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

set the minimum display unit **************************************************************************

setNSamples(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setRotation(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setSpeed(double) - Method in interface org.lsst.ccs.subsystem.metrology.AerotechDevice

setSpeed(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

setSpeed: step/s **************************************************************************

setSpeed(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setStartX(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setStartY(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setState(int) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

setState(int) - Method in class org.lsst.ccs.subsystem.metrology.KeyenceG5001Device

setState(int) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Sets the Metrology Subsystem state word.

setStopX(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setStopY(Object) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigurable

setTickMillis(int) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Sets the tick period.

Sleep(double) - Method in class org.lsst.ccs.subsystem.metrology.AerotechP165Device

Sleep - what a waste **************************************************************************

Sleep(double) - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Sleep - what a waste **************************************************************************

soundAlarm() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

soundBleep() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

startSubSys() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

startSubSys: **************************************************************************

stopSubSys() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

stopSubSys: put TS sub system into the ready state * * @param value The enabled state value to set: 0 = off, ~0 = on.

T

tick() - Method in class org.lsst.ccs.subsystem.metrology.MetrologySubSys

Performs periodic trending data broadcast.

U

updateConfig(ConfigurationInfo) - Method in class org.lsst.ccs.subsystem.metrology.MetrologyConfigCatcher

A C D E G I K L M N O P R S T U