Uses of Package
org.lsst.ccs.subsystems.fcs

Packages that use org.lsst.ccs.subsystems.fcs

Package	Description
org.lsst.ccs.subsystems.fcs	This package is for the control software of the LSST camera Filter Exchanger Subsystem.
org.lsst.ccs.subsystems.fcs.autochanger.ui
org.lsst.ccs.subsystems.fcs.carousel.ui	This package is to gather classes to build GUI for the Carousel.
org.lsst.ccs.subsystems.fcs.common	This packages is for the interfaces or abstract classes that are common for all the subpackages.
org.lsst.ccs.subsystems.fcs.drivers	This package is for the software which communicates with the drivers of the real hardware.
org.lsst.ccs.subsystems.fcs.loader.ui
org.lsst.ccs.subsystems.fcs.simulation	This package is for the simulators of the Filter Exchanger hardware.
org.lsst.ccs.subsystems.fcs.singlefiltertest	This package is for the Single Filter Test control software.
org.lsst.ccs.subsystems.fcs.singlefiltertest.ui
org.lsst.ccs.subsystems.fcs.testbench	This package is for the test bench installed at APC with a PC104 and two Can Open Devices : an ADC and a DAC.
org.lsst.ccs.subsystems.fcs.ui.commons	This package is for the classes used for all the FCS GUIs: loaderGUI, autochangerGUI and carouselGUI.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs

Class and Description
AutochangerLatch This class is a model for the latch which lock a filter on the autochanger trucks.
AutochangerOnlineClamp This is a model for online clamp which holds a filter when it is at ONLINE position.
AutochangerThreeOnlineClamps The Three Online clamps which holds a filter when it is at ONLINE position can ve viewed as a single object.
AutochangerTruck A model for an autochanger truck.
AutochangerTwoTrucks This is a model for autochanger trucks.
CarouselClamp A class to model a clamp that holds a filter on the carousel.
CarouselSensor A model for the carousel sensors.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
ComplementarySensors Represents a couple of DigitalSensor which are complementary : when one has the value 1 the other must have value 0 and vice versa.
DigitalSensor This class represents a sensor which sends 0 or 1.
EPOSEnumerations.EposMode Here are all the modes that can be configurated for an EPOS controller.
EPOSEnumerations.Parameter Here are the parameters that we can set in an Epos controller.
FcsEnumerations.AutoChangerTrucksLocation An enum for the location of the autochanger trucks.
FcsEnumerations.ColoredObject An interface for an object to be displayed on the GUI with the appropriate color.
FcsEnumerations.FcsAlert An ENUM to describe all the Alerts than can be raised by FCS.
FcsEnumerations.FilterClampState An enum for the carousel clamp state.
FcsEnumerations.FilterPresenceStatus The different possibilities for a carousel clamp within the presence of a filter : - no filter - filter engaged and lockable - unknown state - sensor in error The different possibilities for a latch in the autochanger within the presence of a filter : - no filter - filter - engaged - unknown state
FcsEnumerations.FilterReadinessState For mcm.
FcsEnumerations.FilterState For mcm.
FcsEnumerations.LoaderCarrierLocation An enum for the location of the loader carrier.
FcsEnumerations.LockStatus An enum used for the loader clamps and autochanger latches and online clamps.
FcsEnumerations.MobileItemAction This is the different actions that can be made by a MobileItemModule.
FcsEnumerations.SlaveModuleStatus Status of slave status module (ttc-30) in carousel subsystem.
Filter This is a model for an optical filter for the camera.
ForceSensor Represents a model for a force sensor.
LoaderCarrier This is a model for the carrier in the loader.
LoaderClamp This is model for the clamps mechanism in the loader.
LoaderHook This is the model for a single hook in the loader.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
StatusDataPublishedByAutoChanger A structure for the data published on the status bus by the class Autochanger.
StatusDataPublishedByAutochangerLatch The data published on the Status Bus by a latch.
StatusDataPublishedByAutochangerOnlineClamp Object published by an Autochanger Online Clamp.
StatusDataPublishedByAutochangerThreeClamps
StatusDataPublishedByAutochangerTruck An object to be published by one AC Truck.
StatusDataPublishedByAutoChangerTrucks To publish on the status bus the AutoChangerTrucksModule data.
StatusDataPublishedByAutochangerTwoLatches
StatusDataPublishedByCanOpenDevice Data to be published on the STATUS bus by a CANopen device
StatusDataPublishedByCarousel A structure for the data published on the status bus by the CarouselModule.
StatusDataPublishedByCarouselClamp A structure for the data published on the status bus by the ClampModule.
StatusDataPublishedByCarouselSocket An object that a Carousel Socket publishes on the STATUS bus for trending ddata persister and GUIs.
StatusDataPublishedByHardware An object to be published on the Status bus by a Piece of Hardware.
StatusDataPublishedByLoader An object to publish state of loader sensors : - which detect filter presence on loader - which detect if loader is connected on camera
StatusDataPublishedByLoaderCarrier
StatusDataPublishedByLoaderClamp
StatusDataPublishedByLoaderHook

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.autochanger.ui

Class and Description
StatusDataPublishedByAutoChanger A structure for the data published on the status bus by the class Autochanger.
StatusDataPublishedByAutochangerLatch The data published on the Status Bus by a latch.
StatusDataPublishedByAutochangerOnlineClamp Object published by an Autochanger Online Clamp.
StatusDataPublishedByAutochangerThreeClamps
StatusDataPublishedByAutochangerTruck An object to be published by one AC Truck.
StatusDataPublishedByAutoChangerTrucks To publish on the status bus the AutoChangerTrucksModule data.
StatusDataPublishedByAutochangerTwoLatches

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.carousel.ui

Class and Description
FcsEnumerations.ColoredObject An interface for an object to be displayed on the GUI with the appropriate color.
StatusDataPublishedByCarousel A structure for the data published on the status bus by the CarouselModule.
StatusDataPublishedByCarouselClamp A structure for the data published on the status bus by the ClampModule.
StatusDataPublishedByCarouselSocket An object that a Carousel Socket publishes on the STATUS bus for trending ddata persister and GUIs.
StatusDataPublishedByEPOSController
StatusDataPublishedByHardware An object to be published on the Status bus by a Piece of Hardware.
StatusDataPublishedByHYTTC580

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.common

Class and Description
EPOSEnumerations.EposMode Here are all the modes that can be configurated for an EPOS controller.
EPOSEnumerations.Parameter Here are the parameters that we can set in an Epos controller.
FcsEnumerations.FcsAlert An ENUM to describe all the Alerts than can be raised by FCS.
FcsEnumerations.MobileItemAction This is the different actions that can be made by a MobileItemModule.
StatusDataPublishedByEPOSController
StatusDataPublishedByHardware An object to be published on the Status bus by a Piece of Hardware.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.drivers

Class and Description
EPOSEnumerations.EposMode Here are all the modes that can be configurated for an EPOS controller.
EPOSEnumerations.Parameter Here are the parameters that we can set in an Epos controller.
StatusDataPublishedByCanOpenDevice Data to be published on the STATUS bus by a CANopen device
StatusDataPublishedByHYTTC580
StatusDataPublishedByPlutoGateway

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.loader.ui

Class and Description
StatusDataPublishedByLoader An object to publish state of loader sensors : - which detect filter presence on loader - which detect if loader is connected on camera
StatusDataPublishedByLoaderCarrier
StatusDataPublishedByLoaderClamp
StatusDataPublishedByLoaderHook

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.simulation

Class and Description
AutochangerOnlineClamp This is a model for online clamp which holds a filter when it is at ONLINE position.
Carousel This is a representation of the hardware of the carousel.
CarouselClamp A class to model a clamp that holds a filter on the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
ComplementarySensors Represents a couple of DigitalSensor which are complementary : when one has the value 1 the other must have value 0 and vice versa.
DigitalSensor This class represents a sensor which sends 0 or 1.
EPOSEnumerations.EposMode Here are all the modes that can be configurated for an EPOS controller.
EPOSEnumerations.Parameter Here are the parameters that we can set in an Epos controller.
ForceSensor Represents a model for a force sensor.
RedondantSensors Represents a couple of sensors which are redondant : that means they must have the same digitalValue.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.singlefiltertest

Class and Description
Carousel This is a representation of the hardware of the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
DigitalSensor This class represents a sensor which sends 0 or 1.
FcsEnumerations.AutoChangerTrucksLocation An enum for the location of the autochanger trucks.
FcsEnumerations.FilterPresenceStatus The different possibilities for a carousel clamp within the presence of a filter : - no filter - filter engaged and lockable - unknown state - sensor in error The different possibilities for a latch in the autochanger within the presence of a filter : - no filter - filter - engaged - unknown state
FcsEnumerations.LockStatus An enum used for the loader clamps and autochanger latches and online clamps.
FcsEnumerations.MobileItemAction This is the different actions that can be made by a MobileItemModule.
Filter This is a model for an optical filter for the camera.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
StatusDataPublishedByAutochangerLatch The data published on the Status Bus by a latch.
StatusDataPublishedByBasicAutoChanger A structure for the data published on the status bus by a BasicAutoChangerModule.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.singlefiltertest.ui

Class and Description
StatusDataPublishedByAutochangerLatch The data published on the Status Bus by a latch.
StatusDataPublishedByBasicAutoChanger A structure for the data published on the status bus by a BasicAutoChangerModule.
StatusDataPublishedByCarousel A structure for the data published on the status bus by the CarouselModule.
StatusDataPublishedByCarouselClamp A structure for the data published on the status bus by the ClampModule.
StatusDataPublishedByClampActuator Used only in single-filter-test.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.testbench

Class and Description
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.ui.commons

Class and Description
StatusDataPublishedByEPOSController
StatusDataPublishedByHardware An object to be published on the Status bus by a Piece of Hardware.
StatusDataPublishedByHYTTC580
StatusDataPublishedByPlutoGateway