| Package | Description |
|---|---|
| org.lsst.ccs.subsystems.fcs |
This package is for the control software of the LSST camera Filter Exchanger
Subsystem.
|
| org.lsst.ccs.subsystems.fcs.simulation |
This package is for the simulators of the Filter Exchanger hardware.
|
| org.lsst.ccs.subsystems.fcs.singlefiltertest |
This package is for the Single Filter Test control software.
|
| org.lsst.ccs.subsystems.fcs.testbench |
This package is for the test bench installed at
APC
with a PC104 and two Can Open Devices : an ADC and a DAC.
|
| Class and Description |
|---|
| AutochangerLatch
This class is a model for the latch which lock a filter on the autochanger
trucks.
|
| AutochangerOnlineClamp
This is a model for online clamp which holds a filter when it is at ONLINE
position.
|
| AutochangerThreeOnlineClamps
The Three Online clamps which holds a filter when it is at ONLINE position
can ve viewed as a single object.
|
| AutochangerTruck
A model for an autochanger truck.
|
| AutochangerTwoTrucks
This is a model for autochanger trucks.
|
| CarouselClampModule
A class which extends Module to model a clamp that holds a filter on the
carousel.
|
| CarouselModule
This is a representation of the hardware of the carousel.
|
| CarouselSocket
This is a socket on the carousel : there is 5 sockets on a carousel.
|
| ComplementarySensors
Represents a couple of DigitalSensor which are complementary :
when one has the value 1 the other must have value 0 and vice versa.
|
| DigitalSensor
This class represents a sensor which sends 0 or 1.
|
| Filter
This is a model for an optical filter for the camera.
|
| FilterLocator
This interface is to factorise code between main Module for carousel in
standalone mode and main Module for whole fcs.
|
| FilterManager
This class's goal is to manage the filters.
|
| ForceSensor
Represents a model for a force sensor.
|
| LoaderCarrierModule
This is a model for the carrier in the loader.
|
| LoaderClampModule
This is model for the clamps mechanism in the loader.
|
| LoaderHookModule
This is the model for a single hook in the loader.
|
| MainModule
This is the Main Module for every software related to the Filters Exchanger :
- single-filter-test control-command - scale 1 prototype control-command -
real Filters Exchanger This class is designed to gather the commons methods
to all these softwares.
|
| RedondantSensors
Represents a couple of sensors which are redondant : that means they must have the same digitalValue.
|
| Class and Description |
|---|
| AutochangerOnlineClamp
This is a model for online clamp which holds a filter when it is at ONLINE
position.
|
| CarouselClampModule
A class which extends Module to model a clamp that holds a filter on the
carousel.
|
| ComplementarySensors
Represents a couple of DigitalSensor which are complementary :
when one has the value 1 the other must have value 0 and vice versa.
|
| DigitalSensor
This class represents a sensor which sends 0 or 1.
|
| ForceSensor
Represents a model for a force sensor.
|
| RedondantSensors
Represents a couple of sensors which are redondant : that means they must have the same digitalValue.
|
| Class and Description |
|---|
| CarouselModule
This is a representation of the hardware of the carousel.
|
| CarouselSocket
This is a socket on the carousel : there is 5 sockets on a carousel.
|
| DigitalSensor
This class represents a sensor which sends 0 or 1.
|
| Filter
This is a model for an optical filter for the camera.
|
| MainModule
This is the Main Module for every software related to the Filters Exchanger :
- single-filter-test control-command - scale 1 prototype control-command -
real Filters Exchanger This class is designed to gather the commons methods
to all these softwares.
|
| Class and Description |
|---|
| MainModule
This is the Main Module for every software related to the Filters Exchanger :
- single-filter-test control-command - scale 1 prototype control-command -
real Filters Exchanger This class is designed to gather the commons methods
to all these softwares.
|
Copyright © 2017 LSST. All rights reserved.