Uses of Package
org.lsst.ccs.subsystems.fcs

Packages that use org.lsst.ccs.subsystems.fcs

Package	Description
org.lsst.ccs.subsystems.fcs	This package is for the control software of the LSST camera Filter Exchanger Subsystem.
org.lsst.ccs.subsystems.fcs.drivers	This package is for the software which communicates with the drivers of the real hardware.
org.lsst.ccs.subsystems.fcs.simulation	This package is for the simulators of the Filter Exchanger hardware.
org.lsst.ccs.subsystems.fcs.singlefiltertest	This package is for the Single Filter Test control software.
org.lsst.ccs.subsystems.fcs.testbench	This package is for the test bench installed at APC with a PC104 and two Can Open Devices : an ADC and a DAC.
org.lsst.ccs.subsystems.fcs.testbench.LPC

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs

Class and Description
AutochangerLatchModule This class is a model for the latch which lock a filter on the autochanger trucks.
AutoChangerModule This class is used with the final hardware in which we have a clamp online to hold the filter at online position.
AutochangerOnlineClampModule This is a model for online clamp which holds a filter when it is at ONLINE position.
AutochangerThreeOnlineClamps The Three Online clamps which holds a filter when it is at ONLINE position can ve viewed as a single object.
AutoChangerTrucksModule
AutochangerTwoLatches This class represents a model for the 2 Latches of the autochanger.
CarouselClampModule A class which extends Module to model a clamp that holds a filter on the carousel.
CarouselModule This is a representation of the hardware of the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
Filter This is a model for an optical filter for the camera.
FilterManager This class's goal is to manage the filters.
InclinometerModule This is a model for the Inclinometer used in CPPM test bench.
LoaderCarrierModule This is a model for the carrier in the loader.
LoaderClampModule This is model for the clamps mechanism in the loader.
LoaderHookModule This is the model for a single hook in the loader.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
PlutoGatewayModule This represents the gateway to the pluto PLC involved in the camera protection system.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.drivers

Class and Description
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
PlutoGatewayModule This represents the gateway to the pluto PLC involved in the camera protection system.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.simulation

Class and Description
ADCModule An ADC module to read the carousel clamps sensors.
CarouselClampModule A class which extends Module to model a clamp that holds a filter on the carousel.
CarouselModule This is a representation of the hardware of the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
Filter This is a model for an optical filter for the camera.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
PlutoGatewayModule This represents the gateway to the pluto PLC involved in the camera protection system.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.singlefiltertest

Class and Description
CarouselModule This is a representation of the hardware of the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
Filter This is a model for an optical filter for the camera.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.testbench

Class and Description
AutochangerLatchModule This class is a model for the latch which lock a filter on the autochanger trucks.
AutochangerMainModule This class is the Main Module when autochanger is in standalone mode.
AutoChangerModule This class is used with the final hardware in which we have a clamp online to hold the filter at online position.
AutochangerOnlineClampModule This is a model for online clamp which holds a filter when it is at ONLINE position.
AutoChangerTrucksModule
CarouselClampModule A class which extends Module to model a clamp that holds a filter on the carousel.
InclinometerModule This is a model for the Inclinometer used in CPPM test bench.
LoaderModule This is the model for the loader in the Filter Exchange System.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
PlutoGatewayModule This represents the gateway to the pluto PLC involved in the camera protection system.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.testbench.LPC

Class and Description
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.