- CanOpenADC - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is the driver class for the ADC we use in the FCS test bench and in SINGLE FILTER TEST
CAN-CBX-AI814
- CanOpenADC(String, int, String, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenADC
-
- CanOpenDAC - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is the driver class for the DAC we use in the FCS test bench:
CAN-CBX-AO412
- CanOpenDAC(String, int, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDAC
-
- CanOpenDevice - Class in org.lsst.ccs.subsystems.fcs.drivers
-
- CanOpenDevice(String, int, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- CanOpenDigitaxVariator - Class in org.lsst.ccs.subsystems.fcs.testbench.LPC
-
- CanOpenDigitaxVariator(String, int, String, String, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- CanOpenDigitaxVariator.DigitaxMode - Enum in org.lsst.ccs.subsystems.fcs.testbench.LPC
-
Mode for the variator used in the scale1 prototype.
- CanOpenDigitaxVariator.Parameter - Enum in org.lsst.ccs.subsystems.fcs.testbench.LPC
-
Here are the parameters that we can set in an Digitax ST variator.
- CanOpenDIO - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is the driver class for the Digital-Input-Output we use in the FCS: CAN-CBX-DIO8.
- CanOpenDIO() - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- CanOpenDIO(String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- CanOpenEPOS - Class in org.lsst.ccs.subsystems.fcs.drivers
-
A general model for a controller EPOS.
- CanOpenEPOS(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- CanOpenEPOS24 - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This class is the driver of the controller EPOS24.
- CanOpenEPOS24(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS24
-
- CanOpenEPOS70 - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This class is the driver for the controller EPOS70.
- CanOpenEPOS70(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS70
-
- CanOpenErrorsTable - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This class deviceErrorFile a utility class to load the property files we need to monitor
a Can Open device :
- device error codes
- error register codes
- communication errors
- CanOpenErrorsTable() - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenErrorsTable
-
- CanOpenLatchActuatorModule - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is a model for a motor which locks or unlocks a latch.
- CanOpenLatchActuatorModule(String, int, double, double, int, int, String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenLatchActuatorModule
-
- CanOpenLED - Class in org.lsst.ccs.subsystems.fcs.testbench
-
Used in APC TEST BENCH only.
- CanOpenLED() - Constructor for class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- CanOpenLPCGaugeHD2001 - Class in org.lsst.ccs.subsystems.fcs.testbench.LPC
-
A hygrometry, pressure and temperature gauge used for the test bench at LPC in Clermont-Ferrand.
- CanOpenLPCGaugeHD2001(String, int, String, int, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenLPCGaugeHD2001
-
- CanOpenNode - Class in org.lsst.ccs.subsystems.fcs.drivers
-
A model for a Can Open Node : a device on the Can Open Bus.
- CanOpenNode(String) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- CanOpenNumericSensor - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is a model for the numeric sensors we have in single-filter-test and the loader,
to monitor the latches in the autochanger,
the autochanger trucks position in single-filter-test
and the loader hooks.
- CanOpenNumericSensor(String, String, int) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
- CanOpenNumericSensor(String, String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
- CanOpenPlutoGateway - Class in org.lsst.ccs.subsystems.fcs.drivers
-
- CanOpenPlutoGateway(String, int, String, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- CanOpenProxy - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This Module starts a tcpip server, waits for the connection of a client whose
name is the value of the field myClientName.
- CanOpenProxy(String, int, int, String, long) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- CanOpenProxy.PDOStorage - Class in org.lsst.ccs.subsystems.fcs.drivers
-
To store the values returned by the PDO.
- CanOpenSensor14bits - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is a Model for a sensor on a can open bus which communicates over Can Open protocol.
- CanOpenSensor14bits(String, int, String, int) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- CanOpenThermometer - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is a driver for a thermometer we have in the APC test bench.
- CanOpenThermometer(String, int, String, int) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenThermometer
-
- CanOpenTruckMotor - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This represents the motor that moves an autochanger truck along its rail in
the single-filter-test test bench.
- CanOpenTruckMotor() - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- Carousel - Interface in org.lsst.ccs.subsystems.fcs.common
-
This interface is a model for a carousel.
- carousel - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- carousel - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- CarouselClampModule - Class in org.lsst.ccs.subsystems.fcs
-
An abstract class which extends Module to model a clamp that holds a filter on the carousel.
- CarouselClampModule(String, int, Sensor14bits, Sensor14bits, Thermometer, int, int, int, int, int, int, int, int, int, int, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- CarouselModule - Class in org.lsst.ccs.subsystems.fcs
-
This is a representation of the hardware of the carousel.
- CarouselModule(String, int, int, List<CarouselSocket>) - Constructor for class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- CarouselSocket - Class in org.lsst.ccs.subsystems.fcs
-
This is a socket on the carousel : there is 5 sockets on a carousel.
- CarouselSocket(String, int, CarouselClampModule, CarouselClampModule, double, double) - Constructor for class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- carrierController - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- carrierController - Variable in class org.lsst.ccs.subsystems.fcs.testbench.BridgeForLPSCTestBench
-
- change(String, Object) - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- changeMode(EPOSEnumerations.EposMode) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
This methods changes the mode to the new mode given as an argument.
- changeMode(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Changes the mode to the new mode given as a String argument.
- changeMode(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
This methods changes the mode to the new mode given as an argument.
- changeMode(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- changeMode(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
Changes the mode to the new mode given as a String argument.
- changeMode(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- changeMode(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Changes the mode to the new mode given as a String argument.
- changeMode(CanOpenDigitaxVariator.DigitaxMode) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
This methods changes the mode to the new mode given as an argument.
- checkCanOpenNodes() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Check if the list of the booted CANopen devices on the CANbus is identical to
the hardware list we have in the description.
- checkConditionForLocking() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- checkConditionForUnlocking() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- checkControllerBeforeAction() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- checkFault() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- checkFault() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Check if the Controller is in fault.
- checkFault() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- checkFault() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- checkFilterPresence() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Updates the boolean field empty and returns it.
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
This method is called during INITIALIZATION phase.
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
This method is called by method checkHardware in AutoChangerModule
during INITIALIZATION phase.
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.LoaderCanOpenProxy
-
We want that the checkHardware method does nothing during INITIALISATION phase
for the loader tcpProxy because the loader might be not connected.
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- checkHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCanOpenProxy
-
- checkHardwareID(PieceOfHardware) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
When the hardware is booted and we have retrieve the information (serial number),
we want to check for each piece of hardware that we have the good node ID
and the good serial number: so we compare the serial number found on the
CANopen bus with the serial number in the configuration file.
- checkMask() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
This methods checks if the mask of the device is the good one.
- checkMotorParameters() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
This methods read the parameters of the motor stored in the actuator
(hardware configuration)and compare with the configuration stored in the
Configuration Data Base (software configuration).
- checkMotorParameters() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
This methods read the parameters of the motor stored in the actuator
(hardware configuration)and compare with the configuration stored in the
Configuration Data Base (software configuration).
- checkMotorParameters() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- checkMotorParameters() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- checkNewHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
checkNewHardware is called by command checkStarted() in higher level Modules and
is executed when a command completeInitialization is sent to the subsystem.
- checkParameters(String) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
For every parameter to be defined for this mode this method compares the values
in configuration with the value stored in controller CPU
and throws a HardwareException if these values are not equal.
- checkParameters(EPOSEnumerations.EposMode) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- checkParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- checkParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
For every parameter to be defined for this mode this method compares the values
in configuration with the value stored in controller CPU
and throws a HardwareException if these values are not equal.
- checkParameters(Map<String, Integer>) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Compare values of parameters in the map with the values of parameters in the controller CPU.
- checkParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- checkParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- checkParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- checkParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- checkPreConditionsForCarrierMotion() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- checkPreConditionsForClosingHooks() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- checkPreConditionsForClosingLatches() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- checkPreConditionsForOpeningHooks() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- checkPreConditionsForOpeningLatches() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- checkPreConditionsForTrucksMotion() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
This method checks if the preconditions are ok before a motion of the trucks can be started.
- checkPreConditionsForUnlockClamps() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- checkStarted() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- checkStarted() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- checkStarted() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- checkStarted() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
CheckStarted is executed by completeInitialization
when a first start has failed.
- checkStopped() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
This method is executed during a shutdown of the subystem to prevent a shutdown
when some hardware is moving.
- checkStopped() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- checkStopped() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- checkStopped() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
This method is executed during a shutdown of the subystem to prevent a shutdown
when some hardware is moving.
- checkTargetReached() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- checkTargetReached() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
In HOMING mode and PROFILE_POSITION mode this indicates that the position is reached.
- checkTargetReached() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- checkTargetReached() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- clamp() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- clampHooks() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
This method closes the clamps strongly.
- clampHooks() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
- clampState - Variable in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- close() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- close() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- close() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenLatchActuatorModule
-
- close() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- close() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLatchActuatorModule
-
For the simulated latch actuator, the command close has just to update the values of the
lock and unlock simulated sensors.
- close() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
Close the latch : turn on the actuator, read the sensors and wait until the latch is closed.
- close() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
This is the command that has to be sent to the latch actuator to close the latch it (same as lock it).
- closeHooks() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
This method closes the clamps.
- closeHooks() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
- closeLatchesAtHandoff() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- closeLatchesAtStandby() - Method in interface org.lsst.ccs.subsystems.fcs.common.AutoChanger
-
- closeLatchesAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
Close the 2 latches when the autochanger trucks are at standby position.
- closingLatches - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- CommandDispenser - Class in org.lsst.ccs.subsystems.fcs.drivers
-
This is a pale copy of Bernard's commandWord dispenser pattern.
- CommandDispenser() - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser
-
- CommandDispenser.CommandToRegister - Class in org.lsst.ccs.subsystems.fcs.drivers
-
- CommandDispenser.TokenLostException - Exception in org.lsst.ccs.subsystems.fcs.drivers
-
- CommandToRegister(String) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser.CommandToRegister
-
- CompactIOModule - Class in org.lsst.ccs.subsystems.fcs.singlefiltertest
-
This represents a device we use in FCS to connect our numeric sensors(CAN-CBX-DIO8).
- CompactIOModule() - Constructor for class org.lsst.ccs.subsystems.fcs.singlefiltertest.CompactIOModule
-
- computeClampState() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
Compute the global state of the clamp given the lock sensor and the presence filter sensor state.
- computeClampState() - Method in class org.lsst.ccs.subsystems.fcs.FilterClampXminusModule
-
- computeClampState() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampXminusModule
-
- configAsHeartbeatConsumer(int, int, int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Configure a node as a hearbeat consumer.
- configAsHeartbeatProducer(String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Configure a node as a hearbeat producer.
- configAsHeartbeatProducer(int, int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Command to be used by the end users.
- configurationChecked - Variable in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- configureController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- configureControllers() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- configureDigitalInputOfLinearRails(EPOSController) - Static method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
This configures the digital inputs of the EPOS controller to work with a holding brake.
- configureDigitalInputOfOnlineClamps() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
This method is used to configure the controllers of the autochanger online clamps.
- configureDigitalOutputOfLinearRails(EPOSController) - Static method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Configuration of an EPOS controller to work with a holding brake.
- configureDigitalOutputOfOnlineClamps() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
This methods is used to configure the autochanger onlineClamps EPOS controllers.
- configurePlutoForThreeBlocs() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
Assuming Pluto has 3 fonctions Gateway_to_User_C
First one => Fonction_ID=01
Second one => Fonction_ID=02
Third one => Fonction_ID=03
- connectHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- connectHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.LoaderCanOpenProxy
-
This methods connect the CWrapper client, and the TCP server and check the hardware.
- connectLoader() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBench2CanBusMain
-
- controlFilterName(Object) - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
This method controls if the filter name given at the console by an operator is correct.
- controlRealHardware() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- convertToInteger16(int) - Static method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Change an int represented by an UNSIGNED16 to an INTEGER16.
- convertVoltage2Degree(int) - Static method in class org.lsst.ccs.subsystems.fcs.InclinometerModule
-
Concert a voltage in volt between 0.5 and 4.5 volts.
- CPPMTestBenchMainModule - Class in org.lsst.ccs.subsystems.fcs.testbench
-
This subsystem is to read some sensors in CPPM through the pluto gateway.
- CPPMTestBenchMainModule(String, int, BridgeToHardware, String, InclinometerModule, AutochangerOnlineClampModule, AutochangerLatchModule, AutoChangerTrucksModule) - Constructor for class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- CPPMTestBenchWholeMainModule - Class in org.lsst.ccs.subsystems.fcs.testbench
-
- CPPMTestBenchWholeMainModule(String, int, BridgeToHardware, AutoChangerModule, InclinometerModule) - Constructor for class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchWholeMainModule
-
- createActuatorConfig(Actuator) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createActuatorConfig(LatchActuatorModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createAutochangerConfig(AutochangerMainModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
For the Autochanger Main Module when autochanger is at standalone.
- createAutochangerConfig(CPPMTestBenchMainModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
For the CPPM Test Bench Main Module.
- createAutochangerLatchConfig(AutochangerLatchModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createAutochangerTrucksConfig(AutoChangerTrucksModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createCanOpenProxyConfig(CanOpenProxy) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createClampConfig(CarouselClampModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
For the Carousel configonfiglamp
- createEPOSControllerConfig(EPOSController) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
Create an object EPOSControllerConfig
- createLoaderCarrierConfig(LoaderCarrierModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createLoaderClampConfig(LoaderClampModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createLoaderConfig(LoaderTestBenchMainModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createLoaderHookConfig(LoaderHookModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createPlutoGatewayConfig(PlutoGatewayModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createSingleFilterTestConfig(SftMainModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
For the single-filter-test
- createStatusDataPublishedByAutoChanger(AutoChangerModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByAutoChangerTrucks(AutoChangerTrucksModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByBasicAutoChanger(BasicAutoChangerModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByCarousel(CarouselModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByClamp(CarouselClampModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByClampActuator(Actuator) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByEPOSController(EPOSController) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByHardware(PieceOfHardware) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByLatch(FilterLatch) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByLoader(LoaderModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByLoaderCarrier(LoaderCarrierModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByLoaderClamp(LoaderClampModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByOnlineClamp(AutochangerOnlineClampModule) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByThreeClamps(AutochangerThreeOnlineClamps) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- createStatusDataPublishedByTwoLatches(AutochangerTwoLatches) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
- currentAction - Variable in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- currentLimitInVolt - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- currentToMaintainUnlocked - Variable in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- currentToUnlock - Variable in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- GenericLatch - Interface in org.lsst.ccs.subsystems.fcs.common
-
- getActuator() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getAdc() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- getAnalogValue() - Method in class org.lsst.ccs.subsystems.fcs.PlutoGatewayModule
-
- getAutochanger() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getAutochangerHoldingFilterSensor() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getAutoChangerModule() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- getAutochangerTrucks() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getAutochangerTrucks() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getBootedNodesMap() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getBootedNodesNB() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getBridge() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- getBridge() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
- getByteNumero() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
- getByteNumero() - Method in class org.lsst.ccs.subsystems.fcs.drivers.PlutoGWSensor
-
Deprecated.
- getCanOpenHardwareFullState() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
For the Can Open Hardware GUI.
- getCarouselModule() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- getCarrier() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getCarrierController() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getClamp() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getClampActuatorXminus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getClampActuatorXplus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getClampsState() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
Returns the state of the clamps.
- getClampState() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
Returns the clampState of the clamp.
- getClampXminus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
This method returns the clampX- which is at standby position.
- getClampXminus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- getClampXminus() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
- getClampXplus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
This method returns the clampX+ which is at standby position.
- getClampXplus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- getCommandResponse(String, long) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser
-
- getController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getControllerName() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getCurrent() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getCurrent() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getCurrentLimitInVolt() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- getCurrentToClamp() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getCurrentToClamp() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getCurrentToGoHome() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getCurrentToLock() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getCurrentToOpen() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getCurrentToUnlock() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getCurrentToUnlock() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getDac() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- getDacName() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- getDetectedNodeForSerialNumber(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
This method returns the can open detected on the can open network
for a piece of hardware identified by its serial number.
- getDeviceErrorCode() - Method in class org.lsst.ccs.subsystems.fcs.EmergencyMessage
-
- getDeviceErrorName() - Method in class org.lsst.ccs.subsystems.fcs.EmergencyMessage
-
- getDeviceErrorNameByCode(String) - Static method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenErrorsTable
-
Return the name of an error code given as a parameter
in reading in the error codes table.
- getDeviceName() - Method in class org.lsst.ccs.subsystems.fcs.EmergencyMessage
-
- getDigitalValue() - Method in class org.lsst.ccs.subsystems.fcs.NumericSensor
-
- getDio() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- getDoubleValue(String) - Static method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenThermometer
-
This methods translate the hexa value return by a sensor to the double value.
- getDummyFilter() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- getDummyFilter() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- getEncoderRibbonMaxValue() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getEncoderRibbonMinValue() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getEnvironment() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- getErrorHistory() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getErrorHistory() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
For the GUI
- getErrorHistory() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getErrorHistory() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getErrorHistoryNames() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
For the GUI or to display at the console :
return a list of String with the error code and the error name.
- getErrorRegister() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getErrorRegister() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
For the GUI
- getErrorRegister() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getErrorRegister() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getErrorRegisterCode() - Method in class org.lsst.ccs.subsystems.fcs.EmergencyMessage
-
- getErrorRegisterName() - Method in class org.lsst.ccs.subsystems.fcs.EmergencyMessage
-
- getExpectedNodesNB() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getFakeLed() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- getFakeSensor() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- getFilter() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- getFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
This methods return the filter which is in the socketAtStandby at standby position.
- getFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- getFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- getFilterByName(String) - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- getFilterID() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- getFilterInStandbyName() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getFilterLocation() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- getFilterOnTrucks() - Method in interface org.lsst.ccs.subsystems.fcs.common.AutoChanger
-
- getFilterOnTrucks() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getFilterOnTrucksName() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getFilterPosition(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getFilterPositionMaxValue() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getFilterPositionMinValue() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getFilterPositionOffset() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getFilterPositionValueA() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getFilterPositionValueB() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getFilterPositionValueC() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getFilterPresenceSensor() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getFilterPresenceSensor() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
For encapsulation : we want to access to filterPresenceSensor in sub-packages.
- getFilterPresenceSensor() - Method in interface org.lsst.ccs.subsystems.fcs.common.FilterLatch
-
- getFilterPresenceSensor() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getFilterPresenceSensor0() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getFilterPresenceSensor1() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getFilterPresenceSensorValue() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getFilterPresenceStatus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- getFilterPresenceStatus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getFilters() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- getFilterSensorsDIO() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getFilterSensorsDIOName() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getFullState() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
For the GUI.
- getFullState() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- getFullState() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
For the GUI.
- getFullState() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
For the GUI.
- getHaltRequired() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- getHaltRequired() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- getHandoffPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getHandoffPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getHandoffPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getHandoffPositionSensor0() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getHandoffPositionSensor0() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getHandoffPositionSensor1() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getHandoffPositionSensor1() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getHardwareBootTimeout() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getHardwareList() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getHexaValue() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.CompactIOModule
-
- getHexaValues() - Method in class org.lsst.ccs.subsystems.fcs.PlutoGatewayModule
-
- getHoldTime() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getHook1() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getHook2() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getHook3() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getHook4() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getHooksController() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getInitialHexaValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
- getInputNumero() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
- getInputNumero() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuNumericSensor
-
- getLatchActuator() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getLatchController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getLatches() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getLatchesState() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
This method returns the latchesState if it is not been updated otherwise it waits until the end of
the update.
- getLatchXminus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- getLatchXminus() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getLatchXminus() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getLatchXminusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getLatchXminusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- getLatchXminusController() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getLatchXplus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- getLatchXplus() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getLatchXplusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getLatchXplusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- getLed() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- getLinearRailMasterController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getLinearRailMasterController() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getLinearRailMasterController() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getLinearRailSlaveController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getLinearRailSlaveController() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getLinearRailSlaveController() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getLoader() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
- getLoaderConnectedSensor0() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getLoaderConnectedSensor1() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getLoaderOnCameraSensor0() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getLoaderOnCameraSensor1() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getLockSensor() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getLockSensor() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getLockSensor() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockSensor() - Method in interface org.lsst.ccs.subsystems.fcs.common.FilterLatch
-
- getLockSensor() - Method in class org.lsst.ccs.subsystems.fcs.LoaderHookModule
-
- getLockSensor() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getLockSensorMaxValue() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockSensorMinValue() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockSensorOffset() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockSensorValueA() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockSensorValueB() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockSensorValueC() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getLockStatus() - Method in interface org.lsst.ccs.subsystems.fcs.common.FilterLatch
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.LoaderHookModule
-
- getLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getMaxCurrent() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getMaxCurrent() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getMaxCurrent() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getMaxCurrent() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getMaxCurrent() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getMaxCurrent() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getMaxCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getMaxCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getMaxPosition() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getMaxPosition() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getMaxPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getMaxPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getMaxPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getMaxSpeed() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getMaxSpeed() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getMaxSpeed() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getMaxSpeed() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getMaxSpeed() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getMaxSpeed() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getMinCurrent() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getMinCurrent() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getMinCurrent() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getMinCurrent() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getMinCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getMinCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getMinPosition() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getMinPosition() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getMinPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getMinPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getMinPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getMode(String) - Static method in enum org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator.DigitaxMode
-
Retrieve and returns a mode which hexa code is given as an argument.
- getModeInString() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getModeInString() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getModeInString() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getModeInString() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getMotorParameterValue(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getMyClientName() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getName() - Method in interface org.lsst.ccs.subsystems.fcs.common.Actuator
-
- getName() - Method in interface org.lsst.ccs.subsystems.fcs.common.FilterLatch
-
- getName() - Method in interface org.lsst.ccs.subsystems.fcs.common.PieceOfHardware
-
- getName() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- getNbSockets() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getNodeID() - Method in interface org.lsst.ccs.subsystems.fcs.common.PieceOfHardware
-
- getNodeID() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- getNodeID() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- getNodeID() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- getNodeID() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- getNodeID() - Method in class org.lsst.ccs.subsystems.fcs.EmergencyMessage
-
- getNodeID() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getNodeID() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- getNodeName(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getNodes() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getNumOfAnalogInput() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- getOnlineClamps() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getOnlineClampXminus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getOnlineClampXminus() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getOnlineClampXminusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getOnlineClampXminusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getOnlineClampXminusController() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getOnlineClampXplus() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getOnlineClampXplusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getOnlineClampXplusController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getOnlineClampZ() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getOnlineClampZController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getOnlineClampZController() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getOnlinePosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getOnlinePosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getOnlinePositionSensor0() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getOnlinePositionSensor1() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getOutputNumero() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- getOutputNumeroToStandback() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- getOutputNumeroToStandby() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- getParamsForCurrent() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getParamsForCurrent() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getParamsForCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getParamsForCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getParamsForHoming() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getParamsForHoming() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getParamsForHoming() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getParamsForHoming() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getParamsForProfilePosition() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- getParamsForProfilePosition() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getParamsForProfilePosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getParamsForProfilePosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getPdoStorage() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- getPlutoGateway() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- getPlutoGateway() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getPlutoGateway() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- getPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getPosition() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getPosition() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- getPosition() - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
The carousel position measures the rotation angle of the carousel within
the fixed part of the camera.
- getPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getPosition() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- getPresenceStatus() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getProductCode() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- getRailSensorStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
- getRailSensorStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
- getRailsSensorsDIO() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getRailsSensorsDIOName() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getReadActualCurrent() - Method in interface org.lsst.ccs.subsystems.fcs.common.Actuator
-
- getReadActualCurrent() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getReadActualCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getReadActualCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getReadCurrent() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getResponse(long) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser.CommandToRegister
-
Return the response to the initial commandWord.
- getReturnValue(String, int) - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
Returns the value read on the socket for the input of the ADC given as an argument.
- getRevisionNB() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- getSentCurrentMaxValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.Actuator
-
- getSentCurrentMaxValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getSentCurrentMaxValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getSentCurrentMaxValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getSentCurrentMinValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.Actuator
-
- getSentCurrentMinValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getSentCurrentMinValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getSentCurrentMinValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getSentCurrentValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.Actuator
-
- getSentCurrentValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getSentCurrentValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getSentCurrentValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getSerialNB() - Method in interface org.lsst.ccs.subsystems.fcs.common.PieceOfHardware
-
- getSerialNB() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- getSerialNB() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- getSerialNB() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- getSerialNB() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- getSerialNB() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getSerialNB() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- getSftTrucksMotor() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- getSocketAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getSocketAtStandby() - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
This methods returns the socket at standby position or null if there is no
socket at standby position.
- getSocketAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- getSocketNumber(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getSockets() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getSpeed() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getSpeed() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getSpeedVoltageInVolt() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- getSpeedVoltageMaxValue() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- getSpeedVoltageMinValue() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- getSsiPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getStandbyPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getStandbyPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getStandbyPosition() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- getStandbyPosition() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- getStandbyPositionForFilter(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getStandbyPositionSensor0() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getStandbyPositionSensor1() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getState() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getState() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getStation_addr() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Build the class StatusDataPublishedByAutoChangerTrucks
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getStatusData() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getStopRequired() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- getStoragePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getStoragePositionSensor0() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getStoragePositionSensor1() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getTargetPositionToClamp() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getTargetPositionToClose() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getTargetPositionToOpen() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getTcpProxy() - Method in interface org.lsst.ccs.subsystems.fcs.common.BridgeToHardware
-
- getTcpProxy() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- getTcpProxy() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- getTcpProxy() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- getTcpProxy() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- getTcpProxy() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- getTcpProxy() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- getTcpProxyName() - Method in class org.lsst.ccs.subsystems.fcs.EmergencyMessage
-
- getTemperature() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getThermometer() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getThermometer() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- getTimeoutForClampingHooks() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getTimeoutForClosing() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getTimeoutForClosing() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getTimeoutForClosingHooks() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getTimeoutForGoingToHandOff() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getTimeoutForGoingToHomePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getTimeoutForGoingToStorage() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- getTimeoutForOpening() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getTimeoutForOpening() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getTimeoutForOpeningHooks() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- getTimeoutForTrucksMotion() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- getTimeoutRelease() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getTimeoutUnlock() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- getTimeToConfortAPosition() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- getTimeToGoToStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- getTimeToGoToStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- getTransmissionType() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenADC
-
- getTravelTime() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getTruckLocation() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
This method returns the truck position (an ENUM).
- getTrucks() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- getTrucksLocation() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
This method returns the truckLocation if it is not been updated otherwise it waits until the end of
the update.
- getTrucksPosition() - Method in interface org.lsst.ccs.subsystems.fcs.common.AutoChanger
-
- getTrucksPosition() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- getTruckXminus() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getTruckXplus() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- getType() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- getUnlockSensor() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- getUnlockSensor() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getUnlockSensor() - Method in interface org.lsst.ccs.subsystems.fcs.common.FilterLatch
-
- getUnlockSensor() - Method in class org.lsst.ccs.subsystems.fcs.LoaderHookModule
-
- getUnlockSensor() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- getUnlockSensorC() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- getValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.AnalogicSensor
-
- getValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.Sensor
-
- getValue() - Method in class org.lsst.ccs.subsystems.fcs.Sensor14bits
-
This method returns value if the sensor is not updating otherwise it waits
until the update is completed and returns the new read value from the hardware.
- getValue() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.CompactIOModule
-
- getVarValue(String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy.PDOStorage
-
- getVendorID() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- getWeight() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- goToClampedPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
In the initialisation phase, this close the clamp to be able to define the absolute position of the encoder.
- goToHandOff() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Move Autochanger trucks to the Handoff position.
- goToHandOff() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Move the carrier to Handoff position.
- goToHandoff() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
Moves the loader carrier to the handoff position.
- goToHandoff() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
- goToHome() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- goToHomePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
In the initialisation phase, this open the clamp to be able to define the
absolute position of the encoder.
- goToInitialState() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
Initial state for sequence1 :
autochanger is in highposition and trucks are empty
carousel holds a filter and its clamps are in CLAMPEDONFILTER state.
- goToOnline() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Move Autochanger trucks to the Online position.
- goToPosition(double) - Method in interface org.lsst.ccs.subsystems.fcs.common.AutoChanger
-
- goToPosition(double) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- goToStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- goToStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- goToStandby() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Move Autochanger trucks to the Standby position.
- goToStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- goToStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
This methods moves the trucks from standback position to standby position.
- goToStorage() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Move the carrier to storage position.
- goToStorage() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
Moves the loader carrier to the storage position.
- goToStorage() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
- grabFilterAtHandoff(Filter) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- grabFilterAtStandby(Object) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- grabFilterAtStandby(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
This method has to be executed when a filter has just been moved on the carousel
at standby position by the autochanger.
- grabFilterAtStandby(Filter) - Method in interface org.lsst.ccs.subsystems.fcs.common.AutoChanger
-
- grabFilterAtStandby(Filter) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- identifieHardware_old() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Deprecated.
- identifyHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Identification of the hardware : we want to retrieve the information
stored in the hardware of the booted nodes and update the array of nodes
with this information.
- InclinometerModule - Class in org.lsst.ccs.subsystems.fcs
-
This is a model for the Inclinometer used in CPPM test bench.
- InclinometerModule(String, int, String) - Constructor for class org.lsst.ccs.subsystems.fcs.InclinometerModule
-
- initializeAndCheckHardware() - Method in interface org.lsst.ccs.subsystems.fcs.common.PieceOfHardware
-
This methods write some configuration data on the hardware CPU.
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenADC
-
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
This methods has to be overridden if there is some initialization to do for the device.
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
This methods is called during INITIALIZATION phase.
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- initializeAndCheckHardware() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- initializeHardware() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Command for ENGINEERING mode.
- initializeHardware() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
If loader is empty, go to home position otherwise go to clamped position.
- initializeHardware() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenLatchActuatorModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
In the initialisation, we want to do some software initialization,
and some hardware initialization.
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.InclinometerModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.LoaderHookModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.NumericSensor
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.PlutoGatewayModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.Sensor14bits
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerLatchController
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerLinearRailController
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCanOpenProxy
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLatchActuatorModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderCarrierController
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderClampController
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuNumericSensor
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuTestbenchCPPMPlutoGateway
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuTruckMotorModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.CompactIOModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- initModule() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- isAbleToMove() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- isAbleToMove() - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
The carousel can be EngageBrakeed by a break or prevented to move by the
autochanger fliprail.
- isAbleToMove() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
Check if the action is completed.
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- isActionCompleted(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- isADC() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- isAtClampedPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isAtClosedPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isAtHandoff() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isAtHandoffPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Returns the boolean field atHandoff.
- isAtHandoffPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Returns the boolean field atHandoff.
- isAtHomePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isAtOnlinePosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Returns the boolean field atOnline.
- isAtOpenPosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isAtStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
For the single-filter-test only ?
- isAtStandby() - Method in interface org.lsst.ccs.subsystems.fcs.common.AutoChanger
-
- isAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isAtStandbyPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Returns the boolean field atStandby.
- isAtStoragePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Returns the boolean field atStorage.
- isAutochangerHoldingFilter() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isAutochangerHoldingFilter() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isAutochangerHoldingFilterToPublish() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
To publish data we don't want to read again the sensors.
- isBooted() - Method in interface org.lsst.ccs.subsystems.fcs.common.PieceOfHardware
-
- isBooted() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- isBooted() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- isBooted() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- isBooted(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- isBooted() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isBooted() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- isCarouselHoldingFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- isCarrierAtStoragePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isChangerConnected() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBench2CanBusMain
-
- isChangerReady() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBench2CanBusMain
-
- isClampedOnFilter() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- isConnectedOnCamera() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isConnectedOnCamera() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
Returns the boolean field atHandoff.
- isControllerInFault() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isControllerInFault() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isControllerInFault() - Method in interface org.lsst.ccs.subsystems.fcs.common.FilterLatch
-
- isControllerInFault() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isControllerInFault() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- isCWrapperConnected() - Method in interface org.lsst.ccs.subsystems.fcs.common.BridgeToHardware
-
This method returns true if the C-Wrapper is connected to the tcp proxy.
- isCWrapperConnected() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
This method returns true if the C-Wrapper is connected to the tcp proxy.
- isCWrapperConnected() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- isCWrapperConnected() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- isCWrapperConnected() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- isCWrapperConnected() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- isDAC() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- isEmpty() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isEmpty() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- isEmpty() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Returns the boolean field empty.
- isEmpty() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isEmpty() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
Returns the boolean field empty.
- isEmptyOnline() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- isEmptyStandBy() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- isEmptyToPublish() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
To publish data we don't want to read again the sensors.
- isEnable() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- isEnabled() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- isEnabled() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- isEnabled() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isEnabled() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- isEnabledToPublish() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- isEnabledToPublish() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- isEnabledToPublish() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isEnabledToPublish() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- isFilterEngaged() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- isFilterPresenceSensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isHandoffSensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isHandoffSensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isHardwareConnected() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
This method returns true if the C-Wrapper is connected to the tcp proxy.
- isHardwareIdentified() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- isHardwareReady() - Method in interface org.lsst.ccs.subsystems.fcs.common.BridgeToHardware
-
returns true if the hardware is booted, identified.
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
returns true if the hardware is booted, identified and initialized.
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
This method returns true if : all the hardware items are booted and identified
and the hardware have the node ID expected within the configuration
and the hardware is initialized.
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
This methods updates the boolean hardwareReady from the hardware bridge.
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- isHardwareReady() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
returns true if the hardware is booted, identified and initialized.
- isHoldingAFilter() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isHoldingFilterAtStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isHoldingFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- isHoldingFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isHomingDone() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isIdentified() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- isInError() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isInError() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isInError() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- isInError() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
For the GUI
- isInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderHookModule
-
- isInError() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isInError() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isInitialized() - Method in interface org.lsst.ccs.subsystems.fcs.common.PieceOfHardware
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isInitialized() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- isInTravel() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isLimitSwitchDownInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isLimitSwitchUpInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isLoaderConnected() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
Returns the boolean field loaderConnected.
- isLoaderConnected() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBench2CanBusMain
-
- isLoaderConnectedSensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
- isLoaderOnCameraSensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isLoaderReady() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBench2CanBusMain
-
- isLocked() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isLocked() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isLocked() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- isLocked() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
This methods returns true if the clamp is locked.
- isLocked() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- isLocked() - Method in interface org.lsst.ccs.subsystems.fcs.common.GenericLatch
-
- isLocked() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isLocked() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- isLockSensorInError() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isMasterControllerInFault() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isMaxonMotor() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- isMoving() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- isMoving() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
- isMoving() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isMoving() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- isMovingToStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isMovingToStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- isMovingToStandback() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftTruckMotor
-
- isMovingToStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isMovingToStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- isMovingToStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftTruckMotor
-
- isOff() - Method in interface org.lsst.ccs.subsystems.fcs.common.Actuator
-
- isOff() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- isOff() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isOff() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- isOn() - Method in interface org.lsst.ccs.subsystems.fcs.common.Actuator
-
- isOn() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- isOn() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isOn() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- isOnAutoChanger() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- isOnCameraToPublish() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
To publish data we don't want to read again the sensors.
- isOnCarousel() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- isOnline() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isOnlineSensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isOnStandby(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- isOut() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- isReadyToClamp() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- isReadyToGrabAFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
This method let us know if the carousel is ready to receive a filter at
standby position :
- the carousel must not rotate
- an empty socketAtStandby is at standby position.
- isRealHardware() - Method in interface org.lsst.ccs.subsystems.fcs.common.BridgeToHardware
-
- isRealHardware() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- isRealHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- isRealHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- isRealHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- isRealHardware() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- isRotating() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- isRotating() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- isSlaveControllerInFault() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isStandbySensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- isStorageSensorsInError() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- isTargetPositionReached(int) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- isTargetPositionReached(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- isTargetPositionReached(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- isTargetPositionReached(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- isTokenUsed(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser
-
tells if the token is known.
- isTrucksEmpty() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- isUnclampedEmpty() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- isUnclampedOnFilter() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- isUnknown() - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- isUnlocked() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- isUnlocked() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- isUnlocked() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- isUnlockSensorInError() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- PDOStorage() - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy.PDOStorage
-
- PieceOfHardware - Interface in org.lsst.ccs.subsystems.fcs.common
-
This is an interface for a piece of hardware on a can open network.
- plutoGateway - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- plutoGateway - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- plutoGateway - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- plutoGateway - Variable in class org.lsst.ccs.subsystems.fcs.testbench.BridgeForLPSCTestBench
-
- PlutoGatewayInterface - Interface in org.lsst.ccs.subsystems.fcs.common
-
- PlutoGatewayModule - Class in org.lsst.ccs.subsystems.fcs
-
This represents the gateway to the pluto PLC involved in the camera protection system.
- PlutoGatewayModule(String, int) - Constructor for class org.lsst.ccs.subsystems.fcs.PlutoGatewayModule
-
- PlutoGWSensor - Class in org.lsst.ccs.subsystems.fcs.drivers
-
Deprecated.
- PlutoGWSensor(String, String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.drivers.PlutoGWSensor
-
Deprecated.
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- postAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- postStart() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- powerOff() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenLatchActuatorModule
-
- powerOff() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLatchActuatorModule
-
- powerOff() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
Power off the latch actuator.
- pressure - Variable in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
- PressureSensor - Interface in org.lsst.ccs.subsystems.fcs.testbench.LPC
-
- printChildren() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- printChildren() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- printChildren2() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- printConfigurationParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Print the configured parameters for this EPOS for a mode name given in argument.
- printFilters() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- printFilters() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- printMode() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- printParameters() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Print the configured parameters for this EPOS for a mode name given in argument.
- printParameters(Map<String, Integer>) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- printParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Print the configured parameters for this Digitax for a mode name given in argument.
- printParameters(Map<String, Integer>) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Print the parameters map given as argument.
- printSockets() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
Print for every socket on carousel, the name of the filter it contains.
- printValue() - Method in class org.lsst.ccs.subsystems.fcs.NumericSensor
-
- printValue() - Method in class org.lsst.ccs.subsystems.fcs.Sensor14bits
-
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
What to do when the Modules we observe send there new values.
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
What to do when the Modules we observe send there new values.
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
What to do when the Modules we observe (the controllers) send there new values.
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
What to do when the Modules we observe send there new values : we notify our own observers
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
What to do when the Modules we observe send there new values.
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
What to do when the Modules we observe (carousel and autochanger) update
their data to publish : we publish on status bus.
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
What to do when the Modules we observe send there new values.
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
What to do when the Modules we observe send there new values.
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- processUpdate(Observable, Module.ValueUpdate) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- profileVelocity - Variable in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- publishActuatorData() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
Deprecated.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
Publish Data on status bus for trending data base and GUIs.
- publishData() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- publishDataAndNotifyObservers() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- publishedByAutoChangerOutputName - Static variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- publishedByCarouselOutputName - Static variable in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- publishHardwareData(PieceOfHardware) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Publish Data on status bus for trending data base and GUIs.
- publishHardwareData(PieceOfHardware) - Method in class org.lsst.ccs.subsystems.fcs.drivers.LoaderCanOpenProxy
-
Publish Data on status bus for trending data base and GUIs.
- putFilterOnSocket(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- railSensorStandback - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
A effect Hall sensor which says if the truck is at standback position or not.
- railSensorStandby - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
A effect Hall sensor which says if the truck is at standby position or not.
- readAnalogInput(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenADC
-
Read the analog input whom number is given as a parameter
- readAngle() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.LPCInclinometerModule
-
- readControlWord() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Read the control world (index=6040, subindex=0,size=2)
- readControlWord() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Read the control world (index=6040, subindex=0,size=2)
- readCurrent() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- readCurrent() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
In Current Mode this methods returns the current actualy received by the
motor.
- readCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readCurrent() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- readCurrentActualValue - Variable in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
The value of current that is actually sent to the motor.
- readCurrentAverageValue - Variable in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
The value of the average of the current that is actually sent to the motor.
- readCurrentAverageValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
In Current Mode this methods returns the average of the current received by the
motor.
- readCurrentValue - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readErrorHistory() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
The error history holds errors that have occurred on the device and
have been signalled via the emergency object.
- readErrorRegister() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
At index 1001 there deviceErrorFile an error register for the device.
- readFakeSensor() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- readFakeSensor() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
- readHygrometry() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenLPCGaugeHD2001
-
Read the hygrometry with the sensor and returns the new value in %RH
- readHygrometry() - Method in interface org.lsst.ccs.subsystems.fcs.testbench.LPC.HygrometrySensor
-
- readHygrometry() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
Read hygrometry on the gauge and returns its values in decimal format.
- readInclinaison() - Method in class org.lsst.ccs.subsystems.fcs.InclinometerModule
-
Read the inclinaison on the plutoGateway,
updates the filed inclinaison
and returns its value in degrees.
- readMode() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- readMode() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Reads the EPOS mode in the CPU of the EPOS device, updates the field mode and returns
the mode as a String.
- readMode() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readMode() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- readMode() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Reads the Digitax mode in the CPU of the Digitax device, updates the field mode and returns
the mode as a String.
- readNewAnalogValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.PlutoGatewayInterface
-
- readNewAnalogValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- readNewAnalogValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- readNewHexaValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
returns the value in hexa of all the sensors connected on the inputs channels of
the device.
- readNewHexaValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
- readNewHexaValue() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.CompactIOModule
-
- readNewHexaValues() - Method in interface org.lsst.ccs.subsystems.fcs.common.PlutoGatewayInterface
-
- readNewHexaValues() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- readNewHexaValues() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- readNewValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.Sensor
-
This method reads the current value in decimal measured by the hardware
or compute a random value for the simulated sensor, and returns this
current value.
- readNewValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- readNewValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- readNewValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
- readNewValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuNumericSensor
-
- readNewValue() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuSensor14bits
-
- readNumberOfErrors() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- readNumberOfErrors() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
Extract from the Maxon Motor firmware specification :
Contains the number of actual errors that are recorded in the array starting
at subindex 1.
- readNumberOfErrors() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readNumberOfErrors() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- readParameter(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Reads in the EPOS CPU the value of the Parameter which parameter name is given as argument.
- readParameter(EPOSEnumerations.Parameter) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Reads in the EPOS CPU the value of the Parameter.
- readParameter(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Reads in the Digitax Variator CPU the value of the Parameter which parameter
name is given as argument.
- readParameter(CanOpenDigitaxVariator.Parameter) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Reads in the Digitax Variator CPU the value of the Parameter.
- readParameterInHexa(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Reads in the EPOS CPU the hexadecimal value of the Parameter.
- readParameterInHexa(EPOSEnumerations.Parameter) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Reads in the EPOS CPU the value of the Parameter.
- readParameters(EPOSEnumerations.EposMode) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- readParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
This methods reads in the CPU of the EPOS the values of the parameters for a given mode.
- readParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- readParameters() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- readParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- readParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
This methods reads in the CPU of the Digitax Variator the values of the parameters for a given mode.
- readParameters() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- readPDOs() - Method in interface org.lsst.ccs.subsystems.fcs.common.BridgeToHardware
-
- readPDOs() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- readPDOs() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
This method sends a sync command to the can open stack and returns the reply.
- readPDOs() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- readPDOs() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- readPDOs() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- readPDOs() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- readPosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
For the GUI and end users for test purpose.
- readPosition() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- readPosition() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Reads in the CPU the value of the parameter PositionActualValue
and returns it in a decimal format.
- readPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- readPositionActualValue - Variable in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
position we want to reach
UNIT= mA given in decimal mode
- readPressure() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenLPCGaugeHD2001
-
Read the pressure sensors and returns the new value in mbar
- readPressure() - Method in interface org.lsst.ccs.subsystems.fcs.testbench.LPC.PressureSensor
-
- readPressure() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
Read pressure on the gauge and returns its values in decimal format.
- readProfileVelocity() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- readProfileVelocity() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
In PROFILE_POSITION returns the value of the parameter ProfileVelocity.
- readProfileVelocity() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readProfileVelocity() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- readSDO(String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- readSDO(String, String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Read a SDO with the given index and subindex
RETURNS the value read in hexa (String) if no error occured
or returns the error code if a error was detected.
- readSDO(int, String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Command to be used by the end user at the console in engineering mode.
- readSensorsUntilActionIsCompleted(FcsEnumerations.MobileItemAction, long, long) - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
Start reading the sensors at a fixed rate (scheduler.scheduleAtFixedRate)
until the action is completed or we received a halt signal or the timeout
for this action is past.
- readSSIPosition() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- readSSIPosition() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Read the position returned by the absolute encoder (single serial data).
- readSSIPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- readSSIPosition() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
Read the position returned by the absolute encoder (single serial data).
- readStatusWord() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Read the status world (index=6041, subindex=0,size=2)
- readStatusWord() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Read the status world (index=6041, subindex=0,size=2)
- readTemperature() - Method in interface org.lsst.ccs.subsystems.fcs.common.Thermometer
-
- readTemperature() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenThermometer
-
- readTemperature() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuThermometer
-
- readTemperature() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBench2CanBusMain
-
- readTemperature() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- readTemperature() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenLPCGaugeHD2001
-
Read the temparature and returns the new value in degree celcius.
- readTemperature() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
Read temperature on the gauge and returns its values in decimal format.
- readTemperature() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
Read and return the temperature of the clampXminus.
- readTemperatureFromPDO() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- readTemperatureWithPDO(CanOpenProxy.PDOStorage) - Method in interface org.lsst.ccs.subsystems.fcs.common.Thermometer
-
- readTemperatureWithPDO(CanOpenProxy.PDOStorage) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenThermometer
-
- readTemperatureWithPDO(CanOpenProxy.PDOStorage) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuThermometer
-
- readTemperatureWithPDO(CanOpenProxy.PDOStorage) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenLPCGaugeHD2001
-
- readTorque_actual_value() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- readVelocityActualValue() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- readVoltage(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenADC
-
Read the voltage at the ADC input inputNB on the ADC and returns the value in Volt
- register(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser
-
registers a commandWord and returns a token to be used to run the invocation code
- registerResponse(String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser
-
registers the response at a commandWord and the token is given by the calling code.
- release() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
The clamps on the carousel are locked automaticaly when the filter comes
at the standby position.
- releaseBrake() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- releaseBrake() - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
UnEngageBrake the carousel (or disengage the break)
- releaseBrake() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- releaseBrake() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
A holding brake can be associated to a Controller.
- releaseBrake() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- releaseBrake() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- releaseBrake() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- releaseClamps() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- releaseClamps() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
Releases the 2 clamps of the socket.
- releaseClamps() - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
This is a command that can be sent to the carousel.
- releaseClampsContact() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- releaseClampsContact() - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
Before rotating the carousel we have to release the power contact between the
moving part and the fixed part.
- remove(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser
-
- removeFilter() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
Software removing
- removeFilterFromCarousel(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- replaceDigit(String, int, String) - Static method in class org.lsst.ccs.subsystems.fcs.utils.FcsUtils
-
Takes an integer represented by 2 bytes in hexa as argument,
transforms is its binary representation,
replaconfigonfiges the bit at position bitPosition by digit given as argument.
- replaceDigitalValues(int, String, int, String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
This method replace the values of 2 channels in hexaValue with the digital values given as argument.
- replaceDigitalValues(SimuPlutoGWSensor, String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
Set the digital value for a sensor.
- restoreParameters() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Restore default parameters.
- restoreParameters() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- rotate(double) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
Deprecated.
- rotate(double) - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
This method is a command that can be sent to the carousel.
- rotate(double) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- rotateCamera(long) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
to rotate around Z axis
- rotateCamera(long) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
Rotate camera around axe Z within angle value given as argument.
- rotateX(long) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
to rotate around X axis
- rotateX(long) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
Rotate camera around axe X within angle value given as argument.
- saveParameters() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
This method saves the parameters in the controller memory.
- saveParameters() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
This method save the parameters in the actuator memory.
- Scale1ProtoPivotingFrame - Class in org.lsst.ccs.subsystems.fcs.testbench.LPC
-
This is a model for the mobile part of the scale1 prototype test bench.
- Scale1ProtoPivotingFrame(String, int) - Constructor for class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- Scale1ProtoTestBenchMainModule - Class in org.lsst.ccs.subsystems.fcs.testbench.LPC
-
Main Module for the test bench in LPC in Clermont-Ferrand.
- Scale1ProtoTestBenchMainModule(String, int, BridgeToHardware, HygrometrySensor, PressureSensor, Thermometer, CanOpenLED, CanOpenLED, Thermometer, Scale1ProtoPivotingFrame, LPCInclinometerModule) - Constructor for class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
- sendCanOpen(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
For engineering mode, this method can be used to send Can Open commands
to the Wrapper.
- sendCanOpen(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
For engineering mode, this method can be used to send Can Open commands
to the Wrapper.
- Sensor - Interface in org.lsst.ccs.subsystems.fcs.common
-
This interface is the model of a generic sensor.
- Sensor14bits - Class in org.lsst.ccs.subsystems.fcs
-
This class represents a 14bits sensor :
the value returned by the sensor is
coded with 14 bits, so its value is between 0 and 32767.
- Sensor14bits(String, int) - Constructor for class org.lsst.ccs.subsystems.fcs.Sensor14bits
-
- sentCurrent(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
to sent a current to a led
- sentCurrentMaxValue - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- sentCurrentMinValue - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- sentCurrentValue - Variable in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- sentCurrentValue - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- setActualCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- setActuator(EPOSController) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setAdcName(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- setBooted(boolean) - Method in interface org.lsst.ccs.subsystems.fcs.common.PieceOfHardware
-
- setBooted(boolean) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- setBooted(boolean) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- setBooted(boolean) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-
- setBooted(boolean) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- setBooted(boolean) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- setBridge(BridgeToHardware) - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- setBridge(BridgeToHardware) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
- setByteNumero(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
- setClampXminus(CarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- setClampXminus(CarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
- setClampXplus(CarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- setCurrentLimitInVolt(double) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- setCurrentToClamp(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- setCurrentToClamp(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setCurrentToGoHome(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setCurrentToLock(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- setCurrentToOpen(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- setCurrentToUnlock(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- setDac(CanOpenDAC) - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- setDacName(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- setDio(CanOpenDIO) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- setDummyFilter(Filter) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- setEnvironment(Configurable.Environment) - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- setExpectedNodesNB(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- setFakeLed(CanOpenLED) - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- setFakeSensor(Thermometer) - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- setFilterID(Integer) - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- setFilterLocation(FcsEnumerations.FilterLocation) - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- setFilterOnTrucks(Filter) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setFilterPositionOffset(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setFilterPositionValueA(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setFilterPositionValueB(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setFilterPositionValueC(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setFilters(Map<String, Filter>) - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- setFilterSensorsDIOName(String) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setHandoffPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- setHardwareBootTimeout(long) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- setHardwareBootTimeout(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
- setHexaValue(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
- setHoldTime(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- setHomePosition(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Set the Home Position with the value given as argument in decimal format.
- setHomingMethodActual() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Writes value 35 in hexa to set the Homing method as Actual (See EPOS documentation)
- setInitialHexaValue(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
- setInputNumero(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
- setInputNumero(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuNumericSensor
-
- setLed(CanOpenLED) - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- setLockSensorOffset(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setLockSensorValueA(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setLockSensorValueB(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setLockSensorValueC(int) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setLockStatus(FcsEnumerations.LockStatus) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setLockStatus(FcsEnumerations.LockStatus) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- setMaxCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- setMaxPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setMinCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- setMinPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setMovingToStandback(boolean) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftTruckMotor
-
- setMovingToStandby(boolean) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftTruckMotor
-
- setName(String) - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- setNodeID(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- setNodeInfo(String, String, String, String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- setNumOfAnalogInput(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- setNumOfAnalogOutputForCurrentLimit(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenLatchActuatorModule
-
- setNumOfAnalogOutputForSpeedVoltage(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenLatchActuatorModule
-
- setOn(boolean) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- setOn(boolean) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- setOn(boolean) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- setOn(boolean) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- setOutputNumero(int) - Method in class org.lsst.ccs.subsystems.fcs.testbench.CanOpenLED
-
- setOutputNumeroToStandback(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- setOutputNumeroToStandby(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenTruckMotor
-
- setPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- setRailSensorStandback(NumericSensor) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
- setRailSensorStandby(NumericSensor) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
- setRailsSensorsDIOName(String) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setSerialNB(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
- setSerialNB(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNode
-
- setSftTrucksMotor(SftTruckMotor) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- setSpeedVoltageInVolt(int) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- setSpeedVoltageMaxValue(int) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- setSpeedVoltageMinValue(int) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- setSsiPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerLinearRailController
-
- setStandbyPosition(Double) - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- setState(ModuleState) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- setState(ModuleState) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setStoragePosition(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- setTargetPositionToClamp(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setTargetPositionToClose(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setTargetPositionToOpen(int) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setThermometer(Thermometer) - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBenchMainModule
-
- setTimeoutForClampingHooks(long) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setTimeoutForClosing(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- setTimeoutForClosingHooks(long) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setTimeoutForClosingLatches(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setTimeoutForGoingToHandOff(long) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- setTimeoutForGoingToHomePosition(long) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setTimeoutForGoingToStorage(long) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- setTimeoutForOpening(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- setTimeoutForOpeningHooks(long) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- setTimeoutForOpeningLatches(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setTimeoutRelease(long) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setTimeoutUnlock(long) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- setTimeToConfortAPosition(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- setTimeToGoToStandback(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- setTimeToGoToStandby(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- setTimeToWaitForCompleteClose(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setTimeToWaitForCompleteOpen(long) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setTransmissionType(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenADC
-
- setTravelTime(int) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- setTrucksEmpty(boolean) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- setValue(int) - Method in class org.lsst.ccs.subsystems.fcs.Sensor14bits
-
- setVelocity() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- setWeight(double) - Method in class org.lsst.ccs.subsystems.fcs.Filter
-
- SftAutoChangerModule - Class in org.lsst.ccs.subsystems.fcs.singlefiltertest
-
This class is for the Single Filter Test autochanger.
- SftAutoChangerModule(String, int, FilterLatchModule, FilterLatchModule, TruckModule, TruckModule, String, String, SftTruckMotor, long, long, long) - Constructor for class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- SftCarouselModule - Class in org.lsst.ccs.subsystems.fcs.singlefiltertest
-
This class is for the Single Filter Test carousel.
- SftCarouselModule(String, int, int, List<CarouselSocket>) - Constructor for class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- SftMainModule - Class in org.lsst.ccs.subsystems.fcs.singlefiltertest
-
- SftMainModule(String, int, BridgeToHardware, Filter) - Constructor for class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- SftTruckMotor - Class in org.lsst.ccs.subsystems.fcs.singlefiltertest
-
- SftTruckMotor() - Constructor for class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftTruckMotor
-
- sftTrucksMotor - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- shutdown() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- shutdown() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Shutdown the controller.
- shutdown() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- shutdown() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- shutdown() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- shutdownNow() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
This shutdowns the scheduler.
- signal(Signal) - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- signal(Signal) - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- signal(Signal) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
- signal(Signal) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPNHETestBenchMainModule
-
- SimuAutochangerLatchController - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuAutochangerLatchController(String, int, String, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerLatchController
-
- SimuAutochangerLinearRailController - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuAutochangerLinearRailController(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerLinearRailController
-
- SimuAutochangerOnlineClampController - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuAutochangerOnlineClampController(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerOnlineClampController
-
- SimuAutochangerPlutoGateway - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuAutochangerPlutoGateway(String, int, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- SimuBridgeForAutochanger - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuBridgeForAutochanger(String, int, SimuCanOpenProxy, SimuPlutoGateway, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuEPOSControllerModule) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- SimuBridgeForCPPMTestBench - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuBridgeForCPPMTestBench(String, int, SimuCanOpenProxy, SimuPlutoGateway, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuEPOSControllerModule) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- SimuBridgeForLPSCTestBench - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuBridgeForLPSCTestBench(String, int, SimuCanOpenProxy, SimuEPOSControllerModule, SimuEPOSControllerModule, SimuPlutoGateway) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- SimuBridgeToCanOpenHardware - Class in org.lsst.ccs.subsystems.fcs.simulation
-
A simulated bridge to hardware for the single-filter-test simulator
- SimuBridgeToCanOpenHardware(String, int, SimuClampActuatorModule, SimuClampActuatorModule) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- SimuCanOpenProxy - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuCanOpenProxy(String, int, int, String, long) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuCanOpenProxy
-
- SimuCarouselClampModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
A very basic simulated filter clamp module.
- SimuCarouselClampModule(String, int, Sensor14bits, Sensor14bits, Thermometer, int, int, int, int, int, int, int, int, int, int, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- SimuCarouselClampXminusModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuCarouselClampXminusModule(String, int, Sensor14bits, Sensor14bits, Thermometer, int, int, int, int, int, int, int, int, int, int, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampXminusModule
-
- SimuCarouselSocket - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuCarouselSocket(String, int, CarouselClampModule, CarouselClampModule, double, double) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselSocket
-
- SimuClampActuatorModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuClampActuatorModule() - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- SimuClampFilterPresenceSensor - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuClampFilterPresenceSensor(String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuClampFilterPresenceSensor
-
- SimuClampLockSensor - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuClampLockSensor(String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuClampLockSensor
-
- SimuCompactIOModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuCompactIOModule() - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
- SimuEPOSControllerModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
This class is to simulate an EPOS Controller.
- SimuEPOSControllerModule(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- SimuLatchActuatorModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuLatchActuatorModule(String, int, double, double, int, int, String) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuLatchActuatorModule
-
- simulateAlarm(String) - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- simulateAlarm(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- simulateAutochangerIsEmpty() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerIsHoldingFilter() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateAutochangerIsNotHoldingFilter() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateAutochangerLatchesAreLocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerLatchIsLocked(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerLatchIsUnlocked(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampIsLocked(SimuPlutoGWSensor, SimuPlutoGWSensor, SimuPlutoGWSensor, SimuPlutoGWSensor) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampIsUnlocked(SimuPlutoGWSensor, SimuPlutoGWSensor, SimuPlutoGWSensor, SimuPlutoGWSensor) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampsAreLocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampsAreUnlocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampXminusIsLocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampXminusIsUnlocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampXplusIsLocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampXplusIsUnlocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampZIsLocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerOnlineClampZIsUnlocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerTrucksIsAtHandoff() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerTrucksIsAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerTrucksIsInTravel() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateAutochangerTrucksIsOnline() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateClampIsLOCKED(SimuCarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampLockSensor
-
- simulateClampIsUNLOCKED(SimuCarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampLockSensor
-
- simulateFilterIsInError(CarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampFilterPresenceSensor
-
- simulateFilterIsLockable(CarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampFilterPresenceSensor
-
- simulateFilterIsNotLockable(CarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampFilterPresenceSensor
-
- simulateFilterIsNotOnLoader() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateFilterIsOnAutochanger() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateFilterIsOnLoader() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateFilterPresenceInLatches(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCompactIOModule
-
This method updates the 2 filter presence simulated digital sensors (one on each side of the filter).
- simulateHookIsInTravel(SimuPlutoGWSensor, SimuPlutoGWSensor) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateHookIsLocked(SimuPlutoGWSensor, SimuPlutoGWSensor) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateHookIsUnlocked(SimuPlutoGWSensor, SimuPlutoGWSensor) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderCarrierIsAtHandoff() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderCarrierIsAtStorage() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderCarrierIsInTravel() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderClampIsInTravel() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderClampIsLocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderClampIsUnLocked() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderIsConnected() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateLoaderIsConnectedOnCamera() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateLoaderIsDisconnected() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerPlutoGateway
-
- simulateLoaderIsNotConnectedOnCamera() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- simulateNoFilter(CarouselClampModule) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampFilterPresenceSensor
-
- SimuLoaderCarrierController - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuLoaderCarrierController(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderCarrierController
-
- SimuLoaderClampController - Class in org.lsst.ccs.subsystems.fcs.simulation
-
This class is to simulate an EPOS Controller which controls the loader hooks.
- SimuLoaderClampController(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderClampController
-
- SimuLoaderPlutoGateway - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuLoaderPlutoGateway(String, int, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderPlutoGateway
-
- SimuNumericSensor - Class in org.lsst.ccs.subsystems.fcs.simulation
-
This class is used in the single filter test to simulate the rail sensors of the autochanger
and the filter presence sensor on the lachtes.
- SimuNumericSensor(String, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuNumericSensor
-
- SimuOnlineClampController - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuOnlineClampController(String, int, String, String, Map<String, Integer>, Map<String, Integer>, Map<String, Integer>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuOnlineClampController
-
- SimuPlutoGateway - Class in org.lsst.ccs.subsystems.fcs.simulation
-
This class simulates the Can Open PLuto Gateway we use to communicate with the
sensors in the whole size prototype.
- SimuPlutoGateway(String, int, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGateway
-
- SimuPlutoGWSensor - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuPlutoGWSensor(String, String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuPlutoGWSensor
-
- SimuSensor14bits - Class in org.lsst.ccs.subsystems.fcs.simulation
-
This class is to simulate a sensor which returns a value coded on 12bits.
- SimuSensor14bits(String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuSensor14bits
-
- SimuSftCarouselModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuSftCarouselModule(String, int, int, List<CarouselSocket>) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuSftCarouselModule
-
- simuTcpProxy - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- simuTcpProxy - Variable in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- SimuTestbenchCPPMPlutoGateway - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuTestbenchCPPMPlutoGateway(String, int, String, String) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuTestbenchCPPMPlutoGateway
-
- SimuThermometer - Class in org.lsst.ccs.subsystems.fcs.simulation
-
- SimuThermometer(String, int, int) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuThermometer
-
- SimuTruckModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
A simulated truck used by the simulated hardware control software.
- SimuTruckModule(String, int, NumericSensor, NumericSensor) - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuTruckModule
-
- SimuTruckMotorModule - Class in org.lsst.ccs.subsystems.fcs.simulation
-
To simulate a motor which moves a truck in the autochanger.
- SimuTruckMotorModule() - Constructor for class org.lsst.ccs.subsystems.fcs.simulation.SimuTruckMotorModule
-
- slowDownCurrent() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- speedVoltageInVolt - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- speedVoltageMaxValue - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- speedVoltageMinValue - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.LatchActuatorModule
-
- standbyPositionSensor0 - Variable in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- standbyPositionSensor1 - Variable in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- start() - Method in class org.lsst.ccs.subsystems.fcs.drivers.LoaderCanOpenProxy
-
We don't want the tcp server to be started during INITIALISATION phase.
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- startAction(FcsEnumerations.MobileItemAction) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- startHoming() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Starts homing : (See EPOS documentation)
For engineering mode.
- startServer() - Method in interface org.lsst.ccs.subsystems.fcs.common.BridgeToHardware
-
- startServer() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- startServer() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- startServer() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- startServer() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- startServer() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- startServer() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCanOpenProxy
-
- startThreadReader() - Method in interface org.lsst.ccs.subsystems.fcs.common.BridgeToHardware
-
- startThreadReader() - Method in class org.lsst.ccs.subsystems.fcs.drivers.BridgeToCanOpenHardware
-
- startThreadReader() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForAutochanger
-
- startThreadReader() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForCPPMTestBench
-
- startThreadReader() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeForLPSCTestBench
-
- startThreadReader() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuBridgeToCanOpenHardware
-
- startThreadReader() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCanOpenProxy
-
- state - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- stop(long) - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
just to avoid taping "sendSignal STOP"
- stop() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
just to avoid taping "sendSignal STOP"
- stopCurrent() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
In current mode this methods set to zero the value of the current sent to
the motor.
- stopRequired - Variable in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- stopRequired - Variable in class org.lsst.ccs.subsystems.fcs.MainModule
-
- stopServer() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCanOpenProxy
-
- stopVelocity() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Stop the motion in the mode VELOCITY.
- storagePositionSensor0 - Variable in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- storagePositionSensor1 - Variable in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- switchOnEnableOperation() - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- switchOnEnableOperation() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- switchOnEnableOperation() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- switchOnEnableOperation() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- switchOnEnableOperation() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- ungrabFilterAtHandoff(Filter) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- ungrabFilterAtStandby(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- ungrabFilterAtStandby() - Method in interface org.lsst.ccs.subsystems.fcs.common.AutoChanger
-
- ungrabFilterAtStandby() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
Open the latches at standby position and go back empty to STANBACK position.
- unloadFilter(Filter) - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
Unload a filter from the camera to the loader.
- unloadFilterFromCamera() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
This command can be launched when the loader is empty
and we want to take a filter from the camera.
- unloadFilterFromCamera() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
This command can be launched when the loader is empty
and we want to take a filter from the camera.
- unlock() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
Unlock the clamp when a filter is locked by the clamp.
- unlock() - Method in interface org.lsst.ccs.subsystems.fcs.common.GenericLatch
-
- unlockClamps() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- unlockClamps(Filter) - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
This methods ReleaseBrakes the 2 clamps at standby position, without Thread.sleep
- unlockClamps() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
- unlockClamps() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
This method unclamp the 2 clamps at standby position.
- unlockClamps(Filter) - Method in interface org.lsst.ccs.subsystems.fcs.common.Carousel
-
- unlockSensor - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- updateAnalogValue() - Method in class org.lsst.ccs.subsystems.fcs.PlutoGatewayModule
-
- updateClampsStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
Read the clamps state from PDO : all the clamp sensors are read at one time.
- updateClampsStateWithSensors(CanOpenProxy.PDOStorage) - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- updateClampsStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- updateClampsStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselSocket
-
- updateClampsStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuSftCarouselModule
-
- updateClampsStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
- updateClampsStateWithSensorsFromPDO() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
Read the clamps state from PDO : all the clamp sensors are read at one time.
- updateClampsStateWithSensorsFromSDO() - Method in class org.lsst.ccs.subsystems.fcs.CarouselModule
-
Read the clamp sensors one by one with RSDO command
- updateClampsStateWithSensorsFromSDO() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
Deprecated.
- updateCurrent() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
Updates the field readCurrent of the latch in reading the CPU of the controller.
- updateCurrent() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Updates the field position of the carrier in reading the CPU of the controller.
- updateCurrent() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
Updates the field readCurrent of the clamp in reading the CPU of the controller.
- updateFilterPresenceStatus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
Update the field lockPresenceStatus in reading the filter presence sensor.
- updateInclinaison() - Method in class org.lsst.ccs.subsystems.fcs.InclinometerModule
-
- updateLatchesStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
This methods updates the latches status in reading the sensors.
- updateLocation(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuTruckModule
-
In the single filter test, the simultated presence filter sensor listens to the
simulated truck so we have to notify our observers.
- updateLocation(String) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.TruckModule
-
This methods updates the field truckLocation in parsing the values of the 8 channels of the DIO device.
- updateLockStatus() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
Update the field lockStatus in reading the lock sensor.
- updatePosition() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
Updates the field position of the carrier in reading the CPU of the controller.
- updatePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
Updates the field position of the carrier in reading the CPU of the controller.
- updatePosition() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
Updates the position of the clamp in reading the CPU of the controller.
- updateResponse(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CommandDispenser.CommandToRegister
-
- updateState(String) - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
This methods updates the whole autochanger state in reading all the sensors.
- updateStateWithSensors(String[]) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
This methods updates lockStatus from the values return by the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerMainModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerModule
-
This methods updates the trucks, latches and online clamps state in reading all the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
This methods updates the whole autochanger state in reading all the sensors.
- updateStateWithSensors(String[]) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
This methods updates lockStatus from the values return by the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
This methods updates the whole autochanger state in reading all the sensors.
- updateStateWithSensors(String[]) - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
This methods updates lockStatus from the values return by the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- updateStateWithSensors(String[]) - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
This methods updates the lockStatus from an array of hexaValues.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
This methods updates the whole autochanger state in reading all the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
This method updates the clamp clampState regarding the value returned by the
filter presence sensor and the value returned by the method isLocked().
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.FcsMainModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
This methods updates the carrier state in reading all the carrier sensors.
- updateStateWithSensors(String[]) - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
This methods updates the lockStatus from an array of hexaValues.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
This methods updates the lockStatus in reading all the sensors.
- updateStateWithSensors(String[]) - Method in class org.lsst.ccs.subsystems.fcs.LoaderHookModule
-
This methods updates lockStatus from the values return by the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.LoaderModule
-
This methods updates the carrier and clamp state in reading all the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.MainModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuSftCarouselModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftAutoChangerModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftCarouselModule
-
This method reads the clamps sensors and update the clamps state AND
put or remove the filter (software) on the socket at standby.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.SftMainModule
-
This command updates the state of the carousel and of the autochanger in reading the sensors.
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.testbench.APCTestBench2CanBusMain
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.testbench.CPPMTestBenchMainModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LoaderTestBenchMainModule
-
- updateStateWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoTestBenchMainModule
-
- updateStateWithSensorsFromSDO() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
Deprecated.
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.CarouselSocket
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.common.MobileItemModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
- updateStateWithSensorsToCheckIfActionIsCompleted() - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.Scale1ProtoPivotingFrame
-
- updateTemperature() - Method in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
This methods read the thermometer, update the field temperature and returns the value sent
by the thermometer;
- updateTemperature() - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuCarouselClampModule
-
- updateTrucksLocationWithSensors() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
This methods updates the trucks location in reading the sensors.
- updateValue() - Method in interface org.lsst.ccs.subsystems.fcs.common.Sensor
-
This method reads the current value, controls if this current value
is correct depending on the type of the sensor (this value could
be between a minimum and a maximum) and if the value is correct, updates the
Sensor.value field.
- updateValue(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
This methods updates the digital value for this sensor.
- updateValue(String[]) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenNumericSensor
-
Update the field digitalValue from the bytes read on the gateway.
- updateValue(CanOpenProxy.PDOStorage) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenSensor14bits
-
- updateValue(String[]) - Method in class org.lsst.ccs.subsystems.fcs.drivers.PlutoGWSensor
-
Deprecated.
Update the field digitalValue from the bytes read on the gateway.
- updateValue(String) - Method in class org.lsst.ccs.subsystems.fcs.NumericSensor
-
update the digitalValue of this object with the
- updateValue(String[]) - Method in class org.lsst.ccs.subsystems.fcs.NumericSensor
-
- updateValue() - Method in class org.lsst.ccs.subsystems.fcs.Sensor14bits
-
This method updates the sensor value : first it reads a new value from the
hardware or from the simulated sensor,
then it checks if the value is in the range between minimal value and
maximal value.
- updateValue(CanOpenProxy.PDOStorage) - Method in class org.lsst.ccs.subsystems.fcs.Sensor14bits
-
This methods update the field value in extracting it from the parameter sensorsValues
which represents all the values read for an ADC.
- updateValue(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuNumericSensor
-
This methods updates the digital value for this sensor.
- updateValue(String[]) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuNumericSensor
-
- updateValue(CanOpenProxy.PDOStorage) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuSensor14bits
-
We don't need this as the simulated software doesn't read sensors from PDO
- updateValue() - Method in class org.lsst.ccs.subsystems.fcs.singlefiltertest.CompactIOModule
-
- updateValues() - Method in class org.lsst.ccs.subsystems.fcs.PlutoGatewayModule
-
- updatingLatches - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.BasicAutoChangerModule
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.AutochangerLatchModule
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.AutochangerOnlineClampModule
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.AutochangerThreeOnlineClamps
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.AutoChangerTrucksModule
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.AutochangerTwoLatches
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.CarouselClampModule
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.LoaderCarrierModule
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.LoaderClampModule
-
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.LoaderHookModule
-
This is used when we update the latch state with the values returned
by the sensors.
- updatingState - Variable in class org.lsst.ccs.subsystems.fcs.singlefiltertest.FilterLatchModule
-
This is used when we update the latch state with the values returned
by the sensors.
- updatingValues - Variable in class org.lsst.ccs.subsystems.fcs.PlutoGatewayModule
-
- waterFreezeTemp - Static variable in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenADC
-
- writeAnalogOutput(int, int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDAC
-
Write a value to the output of the DAC
- writeControlWord(String) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- writeControlWord(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Write a value in hexa in the control world (index=6040, subindex=0,size=2)
- writeControlWord(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- writeControlWord(String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- writeControlWord(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Write a value in hexa in the control world (index=6040, subindex=0,size=2)
- writeCurrent(int) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
In current mode this methods send a current to the motor.
- writeCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
In current mode this methods send a current to the motor.
- writeCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerLatchController
-
- writeCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- writeCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- writeCurrent(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderClampController
-
- writeDigitalOutput(int, int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
Write a value to the output of the DAC
- writeMask() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDIO
-
This methods initialize the CAN-CBX-DIO8 with the mask (value 3) to configure the
2 first channels of the device to be output channel.
- writeParameter(String, int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
This method writes a parameter in the CPU of the EPOS.
- writeParameter(EPOSEnumerations.Parameter, int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Set the parameter given as argument with the decimal value given as argument
and write it in the controller CPU.
- writeParameter(String, int) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
This method writes a parameter in the CPU of the Digitax Variator.
- writeParameter(CanOpenDigitaxVariator.Parameter, int) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- writeParameterInHexa(EPOSEnumerations.Parameter, String) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
- writeParameterInHexa(String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
This method writes a parameter in the CPU of the EPOS.
- writeParameterInHexa(EPOSEnumerations.Parameter, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Set the parameter given as argument with the hexadecimal value given as argument
and write it in the controller CPU.
- writeParameterInHexa(EPOSEnumerations.Parameter, String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- writeParameterInHexa(EPOSEnumerations.Parameter, String) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- writeParameters(EPOSEnumerations.EposMode) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
This methods writes in the CPU of the EPOS devis the values of the parameters set for the mode.
- writeParameters(Map<String, Integer>) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
Write to the CPU of the EPOS a map of parameters.
- writeParameters() - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- writeParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
- writeParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
This methods writes in the CPU of the EPOS devis the values of the parameters set for the mode.
- writeParameters(Map<String, Integer>) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
Write to the CPU of the EPOS a map of parameters.
- writeParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- writeParameters(Map<String, Integer>) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- writeParameters(EPOSEnumerations.EposMode) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- writeParameters(Map<String, Integer>) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- writeParameters(String) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- writeParameters(CanOpenDigitaxVariator.DigitaxMode) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
This methods writes in the CPU of the EPOS devis the values of the parameters set for the mode.
- writeParameters(Map<String, Integer>) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
Write to the CPU of the Digitax Variator a map of parameters.
- writeSDO(String, String, String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenDevice
-
- writeSDO(String, String, String, String, String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Write a SDO request and send it to the can open stack, then analyses the response
or throws an exception if the request failed.
- writeSDO(int, String, String, int, int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenProxy
-
Command to be used by the end user at the console.
- writeTargetPosition(int) - Method in interface org.lsst.ccs.subsystems.fcs.common.EPOSController
-
In PROFILE_POSITION mode this methods set the target position.
- writeTargetPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenEPOS
-
In PROFILE_POSITION mode this methods set the target position.
- writeTargetPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuAutochangerLinearRailController
-
- writeTargetPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuClampActuatorModule
-
- writeTargetPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuEPOSControllerModule
-
- writeTargetPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderCarrierController
-
- writeTargetPosition(int) - Method in class org.lsst.ccs.subsystems.fcs.simulation.SimuLoaderClampController
-
- writeTorque(int) - Method in class org.lsst.ccs.subsystems.fcs.testbench.LPC.CanOpenDigitaxVariator
-
- writeTransmissionType(String) - Method in class org.lsst.ccs.subsystems.fcs.drivers.CanOpenPlutoGateway
-