Uses of Package
org.lsst.ccs.subsystems.fcs

Packages that use org.lsst.ccs.subsystems.fcs

Package	Description
org.lsst.ccs.subsystems.fcs	This package is for the control software of the LSST camera Filter Exchanger Subsystem.
org.lsst.ccs.subsystems.fcs.common	This packages is for the interfaces or abstract classes that are common for all the subpackages.
org.lsst.ccs.subsystems.fcs.drivers	This package is for the software which communicates with the drivers of the real hardware.
org.lsst.ccs.subsystems.fcs.simulation	This package is for the simulators of the Filter Exchanger hardware.
org.lsst.ccs.subsystems.fcs.singlefiltertest	This package is for the Single Filter Test control software.
org.lsst.ccs.subsystems.fcs.testbench	This package is for the test bench installed at APC with a PC104 and two Can Open Devices : an ADC and a DAC.
org.lsst.ccs.subsystems.fcs.utils

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs

Class and Description
BasicAutoChangerModule An abstract changer module without a fliprail, without online clamp, and without a motor.
CarouselModule This is a representation of the hardware of the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
CompactIOModule This represents a device we use in FCS to connect our numeric sensors(CAN-CBX-DIO8).
Filter This is a model for an optical filter for the camera.
FilterClampModule An abstract class which extends Module to model a clamp that holds a filter on the carousel.
FilterLatchModule This is a model for a latch.
LatchActuatorModule For the single-filter-test, a model for the actuator which opens and close the latches to release or hold a filter.
LoaderCarrierModule This is a model for the carrier in the loader.
LoaderClampModule This is model for the clamps mechanism in the loader.
LoaderHookModule This is the model for a single hook in the loader.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
Sensor14bits This class represents a 14bits sensor : the value returned by the sensor is coded with 14 bits, so its value is between 0 and 32760.
TruckModule A truck is a mobile part in the autochanger.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.common

Class and Description
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
Filter This is a model for an optical filter for the camera.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.drivers

Class and Description
CompactIOModule This represents a device we use in FCS to connect our numeric sensors(CAN-CBX-DIO8).
LatchActuatorModule For the single-filter-test, a model for the actuator which opens and close the latches to release or hold a filter.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
PlutoGatewayModule This represents the gateway to the pluto PLC involved in the camera protection system.
Sensor14bits This class represents a 14bits sensor : the value returned by the sensor is coded with 14 bits, so its value is between 0 and 32760.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.simulation

Class and Description
CarouselModule This is a representation of the hardware of the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
CompactIOModule This represents a device we use in FCS to connect our numeric sensors(CAN-CBX-DIO8).
Filter This is a model for an optical filter for the camera.
FilterClampModule An abstract class which extends Module to model a clamp that holds a filter on the carousel.
LatchActuatorModule For the single-filter-test, a model for the actuator which opens and close the latches to release or hold a filter.
LoaderClampModule This is model for the clamps mechanism in the loader.
LoaderHookModule This is the model for a single hook in the loader.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
PlutoGatewayModule This represents the gateway to the pluto PLC involved in the camera protection system.
Sensor14bits This class represents a 14bits sensor : the value returned by the sensor is coded with 14 bits, so its value is between 0 and 32760.
TruckModule A truck is a mobile part in the autochanger.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.singlefiltertest

Class and Description
BasicAutoChangerModule An abstract changer module without a fliprail, without online clamp, and without a motor.
CarouselModule This is a representation of the hardware of the carousel.
CarouselSocket This is a socket on the carousel : there is 5 sockets on a carousel.
Filter This is a model for an optical filter for the camera.
FilterLatchModule This is a model for a latch.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
TruckModule A truck is a mobile part in the autochanger.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.testbench

Class and Description
FilterClampModule An abstract class which extends Module to model a clamp that holds a filter on the carousel.
InclinometerModule This is a model for the Inclinometer used in CPPM test bench.
LoaderModule This is the model for the loader in the Filter Exchange System.
MainModule This is the Main Module for every software related to the Filters Exchanger : - single-filter-test control-command - scale 1 prototype control-command - real Filters Exchanger This class is designed to gather the commons methods to all these softwares.
NumericSensor This class represents a numeric sensor which sends a digitalValue 0 or 1.
OnlineClampModule This is a model for online clamp which holds a filter when it is at ONLINE position.

Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.utils

Class and Description
AutoChangerModule This class will be used with the final hardware in which we have a clamp online to hold the filter at online position.
BasicAutoChangerModule An abstract changer module without a fliprail, without online clamp, and without a motor.
CarouselModule This is a representation of the hardware of the carousel.
FilterClampModule An abstract class which extends Module to model a clamp that holds a filter on the carousel.
FilterLatchModule This is a model for a latch.
LatchActuatorModule For the single-filter-test, a model for the actuator which opens and close the latches to release or hold a filter.
LoaderCarrierModule This is a model for the carrier in the loader.
LoaderClampModule This is model for the clamps mechanism in the loader.
LoaderHookModule This is the model for a single hook in the loader.