| Package | Description |
|---|---|
| org.lsst.ccs.subsystems.fcs |
This package is for the control software of the LSST camera Filter Exchanger Subsystem.
|
| org.lsst.ccs.subsystems.fcs.common |
This packages is for the interfaces or abstract classes that are common for
all the subpackages.
|
| org.lsst.ccs.subsystems.fcs.drivers |
This package is for the software which communicates with the drivers of the
real hardware.
|
| org.lsst.ccs.subsystems.fcs.simulation |
This package is for the simulators of the Filter Exchanger hardware.
|
| org.lsst.ccs.subsystems.fcs.singlefiltertest |
This package is for the Single Filter Test control software.
|
| org.lsst.ccs.subsystems.fcs.testbench |
This package is for the test bench installed at
APC
with a PC104 and two Can Open Devices : an ADC and a DAC.
|
| Class and Description |
|---|
| CanOpenEPOS
A model general for a controller EPOS
|
| CanOpenProxy.PDOStorage
To store the values returned by the PDO.
|
| PlutoGWSensor
This is a model for a sensor connected to a Pluto PLC for the camera protection system.
|
| Class and Description |
|---|
| CanOpenProxy
This Module starts a tcpip server, waits for the connection of a client whose
name is the value of the field myClientName.
|
| CanOpenProxy.PDOStorage
To store the values returned by the PDO.
|
| Class and Description |
|---|
| CanOpenDevice |
| CanOpenDIO
This is the driver class for the Digital-Input-Output we use in the FCS: CAN-CBX-DIO8.
|
| CanOpenEPOS
A model general for a controller EPOS
|
| CanOpenEPOS.EposMode
Here are all the modes that can be configurated for an EPOS controller.
|
| CanOpenEPOS.Parameter
Here are the parameters that we can set in an Epos controller.
|
| CanOpenEPOS24
This class is the driver of the controller EPOS24.
|
| CanOpenNode |
| CanOpenNumericSensor
This sensor is used to monitor the latches in the autochanger
of the single-filter-test.
|
| CanOpenProxy
This Module starts a tcpip server, waits for the connection of a client whose
name is the value of the field myClientName.
|
| CanOpenProxy.PDOStorage
To store the values returned by the PDO.
|
| CanOpenSensor14bits
This is a Model for a sensor on a can open bus which communicates over Can Open protocol.
|
| Motor
This is a model for a motor which unlocks a clamps on the carousel in the Single filter test.
|
| Class and Description |
|---|
| CanOpenProxy
This Module starts a tcpip server, waits for the connection of a client whose
name is the value of the field myClientName.
|
| CanOpenProxy.PDOStorage
To store the values returned by the PDO.
|
| Class and Description |
|---|
| BridgeToCanOpenHardware
This class gathers the description of the real hardware and the tools (methods)
to give access to this hardware.
|
| CanOpenADC
This is the driver class for the ADC we use in the FCS test bench and in SINGLE FILTER TEST
CAN-CBX-AI814
|
| CanOpenClampActuatorModule
This deviceErrorFile a model for the clamp actuator in the Single Filter Test.
|
| CanOpenDAC
This is the driver class for the DAC we use in the FCS test bench:
CAN-CBX-AO412
|
| CanOpenDIO
This is the driver class for the Digital-Input-Output we use in the FCS: CAN-CBX-DIO8.
|
| CanOpenProxy
This Module starts a tcpip server, waits for the connection of a client whose
name is the value of the field myClientName.
|
| Class and Description |
|---|
| BridgeToCanOpenHardware
This class gathers the description of the real hardware and the tools (methods)
to give access to this hardware.
|
| CanOpenADC
This is the driver class for the ADC we use in the FCS test bench and in SINGLE FILTER TEST
CAN-CBX-AI814
|
| CanOpenDAC
This is the driver class for the DAC we use in the FCS test bench:
CAN-CBX-AO412
|
| CanOpenEPOS24
This class is the driver of the controller EPOS24.
|
| CanOpenEPOS70
This class is the driver for the controller EPOS70.
|
| CanOpenPlutoGateway |
| CanOpenProxy
This Module starts a tcpip server, waits for the connection of a client whose
name is the value of the field myClientName.
|
Copyright © 2014 LSST. All Rights Reserved.