|
||||||||||
| PREV NEXT | FRAMES NO FRAMES | |||||||||
| Packages that use org.lsst.ccs.subsystems.fcs | |
|---|---|
| org.lsst.ccs.subsystems.fcs | This package is for the control software of the LSST camera Filter Exchanger Subsystem. |
| org.lsst.ccs.subsystems.fcs.common | This packages is for the interfaces or abstract classes that are common for all the subpackages. |
| org.lsst.ccs.subsystems.fcs.drivers | This package is for the software which communicates with the drivers of the real hardware. |
| org.lsst.ccs.subsystems.fcs.simulation | This package is for the simulators of the Filter Exchanger hardware. |
| org.lsst.ccs.subsystems.fcs.singlefiltertest | This package is for the Single Filter Test control software. |
| org.lsst.ccs.subsystems.fcs.testbench | This package is for the test bench installed at APC with a PC104 and two Can Open Devices : an ADC and a DAC. |
| org.lsst.ccs.subsystems.fcs.utils | |
| Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs | |
|---|---|
| BasicAutoChangerModule
An abstract changer module without a fliprail, without online clamp, and without a motor. |
|
| CarouselModule
This is a representation of the hardware of the carousel. |
|
| CarouselSocket
This is a socket on the carousel : there is 5 sockets on a carousel. |
|
| ClampActuatorModule
A model for the clamp actuator. |
|
| CompactIOModule
This represents a device we use in FCS to connect our numeric sensors(CAN-CBX-DIO8). |
|
| Filter
This is a model for an optical filter for the camera. |
|
| FilterClampModule
An abstract class which extends Module to model a clamp that holds a filter on the carousel. |
|
| FilterLatchModule
This is a model for a latch. |
|
| FlipRailModule
The fliprail is a rail for the auto-changer. |
|
| LatchActuatorModule
|
|
| NumericSensor
This class represents a numeric sensor which sends a digitalValue 0 or 1. |
|
| Sensor14bits
This class represents an ADC which is a 12bits sensor : the value returned by the sensor is coded with 14 bits, so its value is between 0 and 32760. |
|
| Thermometer
|
|
| TruckModule
A truck is a mobile part in the autochanger. |
|
| Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.common | |
|---|---|
| CarouselSocket
This is a socket on the carousel : there is 5 sockets on a carousel. |
|
| Filter
This is a model for an optical filter for the camera. |
|
| Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.drivers | |
|---|---|
| ClampActuatorModule
A model for the clamp actuator. |
|
| CompactIOModule
This represents a device we use in FCS to connect our numeric sensors(CAN-CBX-DIO8). |
|
| LatchActuatorModule
|
|
| NumericSensor
This class represents a numeric sensor which sends a digitalValue 0 or 1. |
|
| Sensor14bits
This class represents an ADC which is a 12bits sensor : the value returned by the sensor is coded with 14 bits, so its value is between 0 and 32760. |
|
| Thermometer
|
|
| Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.simulation | |
|---|---|
| CarouselModule
This is a representation of the hardware of the carousel. |
|
| ClampActuatorModule
A model for the clamp actuator. |
|
| CompactIOModule
This represents a device we use in FCS to connect our numeric sensors(CAN-CBX-DIO8). |
|
| Filter
This is a model for an optical filter for the camera. |
|
| FilterClampModule
An abstract class which extends Module to model a clamp that holds a filter on the carousel. |
|
| FilterLatchModule
This is a model for a latch. |
|
| LatchActuatorModule
|
|
| NumericSensor
This class represents a numeric sensor which sends a digitalValue 0 or 1. |
|
| Sensor14bits
This class represents an ADC which is a 12bits sensor : the value returned by the sensor is coded with 14 bits, so its value is between 0 and 32760. |
|
| TruckModule
A truck is a mobile part in the autochanger. |
|
| Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.singlefiltertest | |
|---|---|
| BasicAutoChangerModule
An abstract changer module without a fliprail, without online clamp, and without a motor. |
|
| CarouselModule
This is a representation of the hardware of the carousel. |
|
| CarouselSocket
This is a socket on the carousel : there is 5 sockets on a carousel. |
|
| Filter
This is a model for an optical filter for the camera. |
|
| Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.testbench | |
|---|---|
| FilterClampModule
An abstract class which extends Module to model a clamp that holds a filter on the carousel. |
|
| Classes in org.lsst.ccs.subsystems.fcs used by org.lsst.ccs.subsystems.fcs.utils | |
|---|---|
| AutoChangerModule
This class will be used with the final hardware in which we have a fliprail and a clamp online to hold the filter at online position. |
|
| BasicAutoChangerModule
An abstract changer module without a fliprail, without online clamp, and without a motor. |
|
| CarouselModule
This is a representation of the hardware of the carousel. |
|
| ClampActuatorModule
A model for the clamp actuator. |
|
| FilterClampModule
An abstract class which extends Module to model a clamp that holds a filter on the carousel. |
|
| FilterLatchModule
This is a model for a latch. |
|
| LatchActuatorModule
|
|
|
||||||||||
| PREV NEXT | FRAMES NO FRAMES | |||||||||