Index (LSST Camera Control Software - SCPI Device Driver 1.0 API)

C E G I M O R S T V W

C

CHECK_CONTAINS - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification check type - contains string
CHECK_ENDS_WITH - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification check type - ends with string
CHECK_EQUALS - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification check type - equals string
CHECK_MATCHES - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification check type - matches regular expression
CHECK_STARTS_WITH - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification check type - starts with string
checkIdentification(String, int, String, int) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Checks the identification.
clear() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Clears saved status.
clearStatus() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Clears all status reporting structures.
close() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Closes the device connection.
close() - Method in interface org.lsst.ccs.drivers.scpi.ScpiComm
close() - Method in class org.lsst.ccs.drivers.scpi.ScpiCommFtdi: Closes the connection.
close() - Method in class org.lsst.ccs.drivers.scpi.ScpiCommNet: Closes the connection.
close() - Method in class org.lsst.ccs.drivers.scpi.ScpiCommSerial: Closes the connection.
close() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Closes connection to a device.
closeSilent() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Closes the device connection silently.
CONN_TYPE_FTDI - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Connection type - serial via FTDI chip
CONN_TYPE_NETWORK - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Connection type - network
CONN_TYPE_SERIAL - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Connection type - serial via serial port

E

enableOpc() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Enables operation complete reporting.
enableOperationComplete() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Enables operation complete reporting.

G

getError() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Gets the first item from the error queue.
getEventStatus() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Gets the event status register value.
getEventStatusEnable() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Gets the event status enable register value.
getIdentification() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Gets the device identification strings.
getOperationComplete() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Gets the operation complete state.
getServiceRequestEnable() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Gets the service request enable register value.
getStatusByte() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Gets the status byte value.
getValue() - Method in enum org.lsst.ccs.drivers.scpi.TestScpi.ConnType

I

IDENT_FW_VERSION - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification field index - firmware version
IDENT_MANUFACTURER - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification field index - manufacturer
IDENT_MODEL_NAME - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification field index - model name
IDENT_SERIAL_NUMBER - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Identification field index - serial number

M

main(String[]) - Static method in class org.lsst.ccs.drivers.scpi.TalkScpi: Main program.
makeChannelList(int) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Makes a channel list string from a channel number.
makeChannelList(int[]) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Makes a channel list string from an array of channels.

O

open(int, String, int) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Opens a connection to the device.
open(String, int) - Method in interface org.lsst.ccs.drivers.scpi.ScpiComm
open(String, int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommFtdi: Opens a connection.
open(String, int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommNet: Opens a connection.
open(String, int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommSerial: Opens a connection.
open(TestScpi.ConnType, String, int) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Opens connection to a device.
org.lsst.ccs.drivers.scpi - package org.lsst.ccs.drivers.scpi

R

read() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a response.
read(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a response after writing a command.
read(byte[], int) - Method in interface org.lsst.ccs.drivers.scpi.ScpiComm
read(byte[], int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommFtdi: Reads available response data.
read(byte[], int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommNet: Reads available response data.
read(byte[], int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommSerial: Reads available response data.
read() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Reads a response.
read(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Writes a command and reads the response.
readDouble(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a double with SCPI error checking after writing a command.
readDouble(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Writes a command with error checking and reads the double response.
readDoubleArray(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a double array with SCPI error checking after writing a command.
readFloat(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a float with SCPI error checking after writing a command.
readFloat(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Writes a command with error checking and reads the float response.
readFloatArray(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a float array with SCPI error checking after writing a command.
readInteger(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads an integer with SCPI error checking after writing a command.
readInteger(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Writes a command with error checking and reads the integer response.
readIntegerArray(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads an integer array with SCPI error checking after writing a command.
readString(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a string with SCPI error checking after writing a command.
readString(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Writes a command with error checking and reads the string response.
readStringArray(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Reads a string array with SCPI error checking after writing a command.
reset() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Resets to power-on state.
reset() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Resets to power-on state.
runSelfTest() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Executes internal self-test.

S

SB_ERROR_QUEUE - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Status byte bit mask - error queue not empty
SB_EVENT_STATUS - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Status byte bit mask - event status byte summary
SB_MASTER_STATUS - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Status byte bit mask - master status summary
SB_MESSAGE_AVAILABLE - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Status byte bit mask - message available
SB_OPERATION_STATUS - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Status byte bit mask - operation status summary
SB_QUESTIONABLE_STATUS - Static variable in class org.lsst.ccs.drivers.scpi.Scpi: Status byte bit mask - questionable status summary
Scpi - Class in org.lsst.ccs.drivers.scpi: General access routines for a SCPI device.
Scpi() - Constructor for class org.lsst.ccs.drivers.scpi.Scpi
scpi - Variable in class org.lsst.ccs.drivers.scpi.TestScpi
ScpiComm - Interface in org.lsst.ccs.drivers.scpi: Communications interface for SCPI devices.
ScpiCommFtdi - Class in org.lsst.ccs.drivers.scpi: Communications routines for serial SCPI devices connected via FTDI.
ScpiCommFtdi() - Constructor for class org.lsst.ccs.drivers.scpi.ScpiCommFtdi
ScpiCommNet - Class in org.lsst.ccs.drivers.scpi: Communications routines for network SCPI devices.
ScpiCommNet() - Constructor for class org.lsst.ccs.drivers.scpi.ScpiCommNet
ScpiCommSerial - Class in org.lsst.ccs.drivers.scpi: Communications routines for serial SCPI devices.
ScpiCommSerial() - Constructor for class org.lsst.ccs.drivers.scpi.ScpiCommSerial
selfTest() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Runs the self test.
setEse(int) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Sets the event status enable register.
setEventStatusEnable(int) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Sets the event status enable register.
setServiceRequestEnable(int) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Sets the service request enable register.
setSre(int) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Sets the service request enable register.
setTerm(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Sets the command terminator.
setTerminator(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Sets the command terminator.
setTimeout(double) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Sets the read timeout.
setTimeout(int) - Method in interface org.lsst.ccs.drivers.scpi.ScpiComm
setTimeout(int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommFtdi: Sets the receive timeout.
setTimeout(int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommNet: Sets the receive timeout.
setTimeout(int) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommSerial: Sets the receive timeout.
showError() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Displays the first error item.
showEse() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Displays the event status enable register.
showEsr() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Displays the event status register.
showIdentification() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Displays SCPI device identification.
showOpc() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Displays the operation complete state.
showSre() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Displays the service request enable register.
showStatus() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Displays the status byte.

T

TalkScpi - Class in org.lsst.ccs.drivers.scpi: Program to enable direct talking to a SCPI device.
TalkScpi() - Constructor for class org.lsst.ccs.drivers.scpi.TalkScpi
testIdentification(String, int, String, int) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Tests the identification.
TestScpi - Class in org.lsst.ccs.drivers.scpi: Program to test the SCPI device driver
TestScpi() - Constructor for class org.lsst.ccs.drivers.scpi.TestScpi
TestScpi.ConnType - Enum in org.lsst.ccs.drivers.scpi
timeout(double) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Sets the response timeout.

V

valueOf(String) - Static method in enum org.lsst.ccs.drivers.scpi.TestScpi.ConnType: Returns the enum constant of this type with the specified name.
values() - Static method in enum org.lsst.ccs.drivers.scpi.TestScpi.ConnType: Returns an array containing the constants of this enum type, in the order they are declared.

W

waitComp() - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Waits for command completion.
waitCompletion() - Method in class org.lsst.ccs.drivers.scpi.Scpi: Waits for previous command completion.
write(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Writes a command.
write(byte[]) - Method in interface org.lsst.ccs.drivers.scpi.ScpiComm
write(byte[]) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommFtdi: Writes a command.
write(byte[]) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommNet: Writes a command.
write(byte[]) - Method in class org.lsst.ccs.drivers.scpi.ScpiCommSerial: Writes a command.
write(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Writes a command.
writeCommand(String) - Method in class org.lsst.ccs.drivers.scpi.Scpi: Writes a command with SCPI error checking.
writeCommand(String) - Method in class org.lsst.ccs.drivers.scpi.TestScpi: Writes a command with error checking.

C E G I M O R S T V W