Uses of Class org.lsst.ccs.drivers.rcm.RcmException (LSST Camera Control Software

Uses of RcmException in org.lsst.ccs.drivers.rcm

Methods in org.lsst.ccs.drivers.rcm that throw RcmException
Modifier and Type	Method and Description
`Image`	ImageClient.`awaitImage(Image image)` Awaits an image.
`void`	BaseSet.`checkNotVersion(int version)` Checks for not a particular firmware version.
`protected void`	RegClient.`checkOpen()` Checks that connection is open.
`void`	BaseSet.`checkVersion(int version)` Checks for a particular firmware version.
`void`	SequencerUtils.`clearCache()` Clears the sequencer program cached copy.
`void`	RegClient.`close()` Closes a connection.
`void`	ImageClient.`close()` Closes a connection.
`void`	StatusSet.`disable()` Disables the status block.
`void`	Sequencer.`disable()` Disables the sequencer.
`void`	BaseSet.`disable()` Disables the time-base.
`void`	BaseSet.`disable(int regSet)` Disables a register set.
`void`	StatusSet.`enable()` Enables the status block.
`void`	Sequencer.`enable()` Enables the sequencer.
`void`	TempAdcs.`enable()` Enables the temperature ADC reading.
`void`	BaseSet.`enable()` Enables the time-base.
`void`	PowerAdcs.`enable()` Enables the power ADC reading.
`void`	BaseSet.`enable(int regSet)` Enables a register set.
`void`	Cabac.`fetch(int pair)` Fetches the contents of a CABAC pair to the registers.
`int[]`	Cabac.`get(int cabac)` Gets all CABAC field values.
`int`	Cabac.`get(int cabac, int field)` Gets one CABAC field value.
`int[]`	Cabac.`get(int cabac, int first, int count)` Gets several CABAC field values.
`int`	SequencerUtils.`getCacheSliceCount()` Gets the slice count of the sequencer program cached copy.
`long`	BaseSet.`getTime()` Gets the time-base value as millisecond Unix time.
`long`	BaseSet.`getTimeRaw()` Gets the raw time-base value.
`long`	StatusSet.`getTriggerTime()` Gets the status block trigger time.
`long`	Sequencer.`getTriggerTime()` Gets the sequencer trigger time.
`long`	TempAdcs.`getTriggerTime()` Gets the time of the read enable.
`long`	PowerAdcs.`getTriggerTime()` Gets the time of the read enable.
`long`	BaseSet.`getTriggerTime(int regSet)` Gets the trigger time for a register set as Unix millisecond time.
`long`	BaseSet.`getTriggerTimeRaw(int regSet)` Gets the raw trigger time for a register set.
`int`	BaseSet.`getVersion()` Gets the firmware version.
`void`	Cabac.`load(int pair)` Loads a CABAC pair from the registers.
`void`	BoardDacs.`load(int dac)` Loads the DAC values.
`void`	SequencerUtils.`loadCommand(String cmnd)` Carries out a sequencer load command.
`void`	SequencerUtils.`loadCommand(String cmnd, int lineNum)` Carries out a sequencer load command.
`int`	SequencerUtils.`loadFile(String fileName)` Loads the sequencer from a file.
`static void`	TestSpeed.`main(String[] args)` Main program
`void`	RegClient.`open(int id)` Opens a connection.
`void`	ImageClient.`open(int id)` Opens a connection.
`int`	RegClient.`read(int address)` Reads from a register.
`void`	RegClient.`read(int address, int[] values)` Reads from a set of registers.
`void`	RegClient.`read(int address, int[] values, int offset, int count)` Reads from a set of registers.
`float`	TempAdcs.`readAdc(int adc)` Reads one temperature value.
`float`	PowerAdcs.`readAdc(int adc)` Reads one power value.
`float[]`	TempAdcs.`readAdcs()` Reads all the temperature values.
`float[]`	PowerAdcs.`readAdcs()` Reads all the power values.
`float[]`	TempAdcs.`readAdcs(int first, int count)` Reads a range of temperature values.
`float[]`	PowerAdcs.`readAdcs(int first, int count)` Reads a range of power values.
`boolean`	ImageClient.`readImage(Image image)` Reads an image.
`long`	RegClient.`readLong(int address)` Reads a register pair as a long value.
`int[]`	Cabac.`readRaw(int cabac)` Reads all CABAC input registers in raw format.
`Status`	StatusSet.`readStatus()` Reads the status block.
`void`	Cabac.`reset(int pair)` Resets a CABAC pair.
`void`	TestSpeed.`run(int rcmid, int regnum, int nreg, int count)` Runs the test
`void`	Sequencer.`sendStep()` Sends the step command.
`void`	Sequencer.`sendStop()` Sends the stop command.
`void`	Cabac.`set(int cabac, int[] value)` Sets all CABAC field values.
`void`	Cabac.`set(int cabac, int field, int value)` Sets one CABAC field value.
`void`	BoardDacs.`set(int dac, int chan, int value)` Sets a DAC value.
`void`	BoardDacs.`set(int dac, int chan, int[] value)` Sets multiple DAC values.
`void`	Cabac.`set(int cabac, int first, int count, int[] value)` Sets several CABAC field values.
`void`	BaseSet.`setTime()` Sets the time-base value to the current system time.
`void`	BaseSet.`setTime(long time)` Sets the time-base value as millisecond Unix time.
`void`	BaseSet.`setTimeRaw(long time)` Sets the raw time-base value.
`int`	RegClient.`update(int address, int mask, int value)` Updates a register.
`void`	TempAdcs.`waitDone()` Waits for the data to be available.
`void`	PowerAdcs.`waitDone()` Waits for the data to be available.
`void`	BaseSet.`waitDone(int regSet)` Waits for a register set to become disabled.
`void`	RegClient.`write(int address, int value)` Writes to a register.
`void`	RegClient.`write(int address, int[] values)` Writes to a set of registers.
`void`	RegClient.`write(int address, int[] values, int offset, int count)` Writes to a set of registers.
`void`	Sequencer.`writeBebSelect(int value)` Writes the BEB selector register.
`void`	Sequencer.`writeDataSource(int value)` Writes the data source register.
`void`	Sequencer.`writeLines(int func, int[] values)` Writes a set of output lines values.
`void`	Sequencer.`writeLines(int func, int[] values, int offset, int count)` Writes a set of output lines values.
`void`	Sequencer.`writeLines(int func, int slice, int value)` Writes an output lines value.
`void`	RegClient.`writeLong(int address, long value)` Writes a long value to a register pair.
`void`	Sequencer.`writeProgEnd(int addr)` Writes an end program word.
`void`	Sequencer.`writeProgEndSubr(int addr)` Writes an end subroutine word.
`void`	Sequencer.`writeProgExec(int addr, int func, int count)` Writes an execute program word.
`void`	Sequencer.`writeProgJump(int addr, int subaddr, int count)` Writes a jump program word.
`void`	Sequencer.`writeProgram(int addr, int value)` Writes a program word.
`void`	Sequencer.`writeProgram(int addr, int[] values)` Writes a set of program words.
`void`	Sequencer.`writeProgram(int addr, int[] values, int offset, int count)` Writes a set of program words.
`void`	Sequencer.`writeSliceCount(int value)` Writes the slice count.
`void`	Sequencer.`writeStack(int[] values)` Writes a complete set of stack values, setting the stack size.
`void`	Sequencer.`writeStack(int[] values, int offset, int count)` Writes a complete set of stack values, setting the stack size.
`void`	Sequencer.`writeStack(int addr, int value)` Writes a stack value.
`void`	Sequencer.`writeStack(int addr, int[] values)` Writes a set of stack values.
`void`	Sequencer.`writeStack(int addr, int[] values, int offset, int count)` Writes a set of stack values.
`void`	Sequencer.`writeStackSize(int value)` Writes the stack size.
`void`	Sequencer.`writeTimes(int func, int[] values)` Writes a set of time slice values.
`void`	Sequencer.`writeTimes(int func, int[] values, int offset, int count)` Writes a set of time slice values.
`void`	Sequencer.`writeTimes(int func, int slice, int value)` Writes a time slice value.

Uses of Classorg.lsst.ccs.drivers.rcm.RcmException

Uses of RcmException in org.lsst.ccs.drivers.rcm

Uses of Class
org.lsst.ccs.drivers.rcm.RcmException