A C G L M O R S T V

A

acivateNewSettings() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Activate new settings

activateData() - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Send activate-data command to converter.

C

close() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Closes connection

G

getMaxValue() - Method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndParam

getMinValue() - Method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndParam

getRegister() - Method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndOp

getRegister() - Method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndParam

L

listSerialFormats() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

List available serial formats

M

MotronaIV251 - Class in org.lsst.ccs.drivers.motrona

Driver for Motrona IV251 SSI signal converter Implements functions needed for conversion of signals from an SSI encoder to RS-232 serial output.

MotronaIV251() - Constructor for class org.lsst.ccs.drivers.motrona.MotronaIV251

Constructor.

MotronaIV251.CmndOp - Enum in org.lsst.ccs.drivers.motrona

Operation commands

MotronaIV251.CmndParam - Enum in org.lsst.ccs.drivers.motrona

Enumeration of commands to set or read relevant control parameters.

O

open(DriverConstants.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Override underlying open method of Ascii class

open(String) - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Open serial connection using default data characteristics

open(String) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Opens serial connection to MotronaIV251 device with default baud rate and data characteristics.

open(String, int, MotronaIV251.SerialFormat) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Opens serial connection to MotronaIV251 device with specified baud rate and data characteristics.

org.lsst.ccs.drivers.motrona - package org.lsst.ccs.drivers.motrona

R

readAll() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Read all settings and data from Motrona IV251 Loops over all read commands and returns them in a table format.

readEncoder() - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Read linear-encoder position

readEncoderError() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Read encoder error bit

readErrorBit() - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Read linear-encoder error bit

readParam(MotronaIV251.CmndParam) - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Read parameter value

readPosition() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Read encoder position.

readSerialSettings() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Read and decode serial settings of device

repeatSetParameter(MotronaIV251.CmndParam, int, int) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Set a parameter multiple times in close succession (PUrpose: to help diagnose intermittent timeouts)

S

saveSettings() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Save settings for next power-up

saveToEEProm() - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Save active values of parameters to EEProm

setAndActivateParam(MotronaIV251.CmndParam, int) - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Set and activate parameter value

setAndActivateParameter(MotronaIV251.CmndParam, int) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Set and activate parameter value

setDataRate(int) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Set serial baud rate (pending activate command)

setDebug(boolean) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Set debug mode on or off

setDelay(long) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Set delay after completing a command to hardware

setParam(MotronaIV251.CmndParam, int) - Method in class org.lsst.ccs.drivers.motrona.MotronaIV251

Set parameter value (pending activate-data command

setParameter(MotronaIV251.CmndParam, int) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Set parameter value (pending activate command)

setSerialFormat(MotronaIV251.SerialFormat) - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Set serial format (pending activate command)

T

TestIV251 - Class in org.lsst.ccs.drivers.motrona

Program to test Motrona IV251 SSI to serial converter

TestIV251() - Constructor for class org.lsst.ccs.drivers.motrona.TestIV251

Constructor

timestamp() - Method in class org.lsst.ccs.drivers.motrona.TestIV251

Determines current time

V

valueOf(String) - Static method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndOp

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndParam

Returns the enum constant of this type with the specified name.

values() - Static method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndOp

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.motrona.MotronaIV251.CmndParam

Returns an array containing the constants of this enum type, in the order they are declared.

A C G L M O R S T V