A C D E F G I M O R S T U V W

A

assignRelay(int, int) - Method in class org.lsst.ccs.drivers.mks.GP390

Assigns a trip relay to a vacuum type.

assignRelay(int, int) - Method in class org.lsst.ccs.drivers.mks.GP835

Assigns a trip relay to a vacuum type.

assignRelay(int, TestGP390.VacType) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Assigns a trip relay to a vacuum type.

assignRelay(int, int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

C

calibrateAtmospheric() - Method in class org.lsst.ccs.drivers.mks.GP390

Calibrates at atmospheric pressure.

calibrateAtmospheric(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Calibrates MicroPirani at atmospheric pressure.

calibrateFullScale(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Calibrates cold cathode at full scale.

calibrateVacuum() - Method in class org.lsst.ccs.drivers.mks.GP390

Calibrates at vacuum pressure.

calibrateVacuumCC() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Calibrates cold cathode at vacuum pressure.

calibrateVacuumMP() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Calibrates MicroPirani at vacuum pressure.

changeAddress(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Changes the device address.

checkOpenGP390() - Method in class org.lsst.ccs.drivers.mks.GP835

Checks that GP390 connection is open.

close() - Method in class org.lsst.ccs.drivers.mks.GP390

Closes the connection.

close() - Method in class org.lsst.ccs.drivers.mks.Test9XX

close() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Closes the connection.

D

DEFAULT_ADDRESS - Static variable in class org.lsst.ccs.drivers.mks.Model9XX

DEFAULT_BAUDRATE - Static variable in class org.lsst.ccs.drivers.mks.Model9XX

DISP_ABS - Static variable in class org.lsst.ccs.drivers.mks.GP390

DISP_BOTH - Static variable in class org.lsst.ccs.drivers.mks.GP390

DISP_DIFF - Static variable in class org.lsst.ccs.drivers.mks.GP390

E

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Enables/disables a trip relay.

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.GP835

Enables/disables a trip relay.

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Enables/disables a trip relay.

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.TestGP835

F

FMODE_ALT - Static variable in class org.lsst.ccs.drivers.mks.GP390

FMODE_AUTO - Static variable in class org.lsst.ccs.drivers.mks.GP390

FMODE_MAN - Static variable in class org.lsst.ccs.drivers.mks.GP390

G

getAnalogOut(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets an analog output string.

getAtmospheric() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the atmospheric pressure.

getAtmospheric() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the atmospheric pressure calibration factor.

getAutoZeroLimit() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the MicroPirani auto zero limit.

getBaudRate() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the baud rate.

getCalibrationGas() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the calibration gas.

getCCProtDelay() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets cold cathode protection delay.

getDeviceType() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the transducer device type.

getFilamentPower() - Method in class org.lsst.ccs.drivers.mks.GP835

Returns the filament power

getFilamentPower() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getFilamentStatus() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the filament status.

getFirmwareVersion() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the firmware version.

getFullScale() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the cold cathode full-scale pressure calibration factor.

getFwVersion() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the firmware version.

getHardwareVersion() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the hardware version.

getHighIntPressure() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets high integration pressure.

getInstrument() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the currently selected instrument

getInstrument() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getLowIntPressure() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets low integration pressure.

getManufacturer() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the manufacturer.

getMiDegasTime() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge degas time.

getMiDelayTime() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge delay time.

getMiGaugeCurrent() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge current.

getMiGaugeMode() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge mode.

getMiSwitchPressure() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion current switch pressure.

getModel() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the model.

getMSP() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the mass spectrometer scan results

getMSP() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getOffPressureCC() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets cold cathode turn-off pressure.

getOnPressureCC() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets cold cathode turn-on pressure.

getPartNumber() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the part number.

getPressure() - Method in class org.lsst.ccs.drivers.mks.GP835

Returns the pressure

getPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getPressureGP390() - Method in class org.lsst.ccs.drivers.mks.GP835

Returns the pressure directly from the GP390

getPressureGP390() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getPressureUnit() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the pressure unit.

getPressureUnit() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the pressure unit.

getRelayAssignment(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the assignment for a trip relay.

getRelayAssignment(int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the assignment for a trip relay.

getRelayAssignment(int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

getRelayDirection(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets a relay trip direction.

getRelayEnable(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the enabled state of a relay.

getRelayHyst(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets a relay hysteresis value.

getRelayTrip(int, int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets a trip relay set point.

getRelayTrip(int, int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets a trip relay set point.

getRelayTrip(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets a relay set point.

getRelayTrip(int, int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

getSensorDose() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the sensor pressure dose.

getSensorDoseLimit() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets cold cathode pressure dose limit.

getSensorTimeOn() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the sensor time on.

getSerialNumber() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the serial number.

getStatus() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the transducer status.

getStatusStrings() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the array of status strings.

getStatusWord() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the status word.

getTestReport() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the test report

getTestReport() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getTimeOn() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the transducer time on.

getUserTag() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the user tag.

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.Fmode

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.TripType

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.Units

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.VacType

GMODE_DEGAS - Static variable in class org.lsst.ccs.drivers.mks.GP390

GMODE_HIGH - Static variable in class org.lsst.ccs.drivers.mks.GP390

GMODE_LOW - Static variable in class org.lsst.ccs.drivers.mks.GP390

GMODE_OFF - Static variable in class org.lsst.ccs.drivers.mks.GP390

GP390 - Class in org.lsst.ccs.drivers.mks

Routines for communicating with an MKS GP390 series vacuum gauge

GP390() - Constructor for class org.lsst.ccs.drivers.mks.GP390

GP390.ConnType - Enum in org.lsst.ccs.drivers.mks

Constants & data.

GP835 - Class in org.lsst.ccs.drivers.mks

General access routines for the GP835 device

GP835() - Constructor for class org.lsst.ccs.drivers.mks.GP835

Constructor

I

isCCAutoPowerOn() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets cold cathode auto power state.

isCCPowerOn() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets cold cathode power state.

isFilamentOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether the vacuum gauge micro-ion filament is on

isFilamentOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

isGaugeOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether the vacuum gauge is on

isGaugeOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

isIdentifying() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the identify state.

isMiDegasOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether a micro-ion gauge degas is on or off.

isMiDelayOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether the micro-ion gauge delay is on or off.

isMiGaugeOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether the micro-ion gauge is on or off.

isPressureIndOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether the pressure indication is on or off.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets whether a trip relay is active.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether a trip relay is active.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets whether a relay is active.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Gets whether a trip relay is active.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

isRelayDelayed() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the relay trip delayed state.

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets whether a trip relay is enabled.

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether a trip relay is enabled.

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows whether a trip relay is enabled.

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

isResponseDelayed() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the RS-485 delayed response state.

isSwitchEnabled() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Gets the switch enabled state.

M

Model9XX - Class in org.lsst.ccs.drivers.mks

Routines for communicating with an MKS model 972, 974 or 925 vacuum gauge

Model9XX() - Constructor for class org.lsst.ccs.drivers.mks.Model9XX

Constructor

Model9XX.Default - Enum in org.lsst.ccs.drivers.mks

Model9XX.Direction - Enum in org.lsst.ccs.drivers.mks

Model9XX.Enable - Enum in org.lsst.ccs.drivers.mks

Model9XX.Gas - Enum in org.lsst.ccs.drivers.mks

Model9XX.Sensor - Enum in org.lsst.ccs.drivers.mks

Public constants.

Model9XX.Unit - Enum in org.lsst.ccs.drivers.mks

monPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP835

mydev - Variable in class org.lsst.ccs.drivers.mks.TestGP835

O

open(GP390.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.mks.GP390

Opens a connection.

open(DriverConstants.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.mks.GP835

Opens a connection.

open(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Opens a serial connection.

open(Multidrop.ConnType, String, int, int, int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Opens a multi-drop (RS-485) connection.

open(Multidrop.ConnType, String) - Method in class org.lsst.ccs.drivers.mks.Test9XX

open(Multidrop.ConnType, String, int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

open(Multidrop.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

open(GP390.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Opens connection to a device.

open(DriverConstants.ConnType, String) - Method in class org.lsst.ccs.drivers.mks.TestGP835

openftdi(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Opens an FTDI connection.

org.lsst.ccs.drivers.mks - package org.lsst.ccs.drivers.mks

OUTPUT_MAX - Static variable in class org.lsst.ccs.drivers.mks.Model9XX

OUTPUT_MIN - Static variable in class org.lsst.ccs.drivers.mks.Model9XX

R

read(String) - Method in class org.lsst.ccs.drivers.mks.Test9XX

readAMU() - Method in class org.lsst.ccs.drivers.mks.GP835

Reads the AMU data

readDiffPressure() - Method in class org.lsst.ccs.drivers.mks.GP390

Reads the differential pressure.

readDiffPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Reads the differential pressure.

readDoublePairArray(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Reads a double pair array with SCPI error checking after writing a command.

readGP390(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Sends a GP390 command and returns the result

readGP390(String, String...) - Method in class org.lsst.ccs.drivers.mks.TestGP835

readPressure() - Method in class org.lsst.ccs.drivers.mks.GP390

Reads the vacuum pressure.

readPressure(Model9XX.Sensor) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Reads a pressure sensor.

readPressure() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Reads the combined pressure.

readPressure() - Method in class org.lsst.ccs.drivers.mks.Test9XX

readPressure(Model9XX.Sensor) - Method in class org.lsst.ccs.drivers.mks.Test9XX

readPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Reads the vacuum pressure.

readTemperature() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Reads the MicroPirani temperature.

readTemperature() - Method in class org.lsst.ccs.drivers.mks.Test9XX

RELAY_ABS - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_ACT - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_DEACT - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_DIFF - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_MAX - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_MAX - Static variable in class org.lsst.ccs.drivers.mks.Model9XX

RELAY_MIN - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_MIN - Static variable in class org.lsst.ccs.drivers.mks.Model9XX

reset() - Method in class org.lsst.ccs.drivers.mks.GP390

Resets to power-up state.

reset() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Resets to power-on state.

S

setAddress(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setAddressOffset(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the address offset.

setAnalogOut(int, Model9XX.Sensor, int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets analog output parameters.

setAnalogOut(int, Model9XX.Sensor, int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setAtmospheric(double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the atmospheric pressure.

setAtmospheric(double) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setAtmospheric(double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the atmospheric pressure.

setAutoZeroLimit(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the MicroPirani auto zero limit.

setBaud(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setBaudRate(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the baud rate.

setBaudRate(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the baud rate.

setCalibrationGas(Model9XX.Gas) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the calibration gas.

setCCAutoPower(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets cold cathode auto power on/off.

setCCPower(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets cold cathode power on/off.

setCCProtDelay(int) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets cold cathode protection delay.

setCCProtection(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets cold cathode protection on/off.

setCommDefaults() - Method in class org.lsst.ccs.drivers.mks.GP390

Sets communications defaults.

setDefaults() - Method in class org.lsst.ccs.drivers.mks.GP390

Sets factory defaults.

setDefaults() - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets factory defaults.

setDefaults(Model9XX.Default) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets factory defaults.

setDefaults() - Method in class org.lsst.ccs.drivers.mks.Test9XX

setDefaults(Model9XX.Default) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setDefaults() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets values to factory defaults.

setDegasOn(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Turns the micro-ion gauge degas on or off.

setDegasTime(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the micro-ion gauge degas time.

setDelayedResponse(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the delayed response state.

setDelayOn(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Turns the micro-ion gauge delay on or off.

setDelayTime(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the micro-ion gauge delay time.

setDeviceNum(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setFilament(TestGP390.Fmode) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the filament mode.

setFilamentMode(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the filament mode.

setFilamentOff() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the vacuum gauge micro-ion filament off --- usually to avoid light

setFilamentOff() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setFilamentOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the vacuum gauge micro-ion filament on.

setFilamentOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setGasType(Model9XX.Gas) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setGaugeOff() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the whole vacuum gauge off --- usually to avoid light

setGaugeOff() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setGaugeOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the whole vacuum gauge on.

setGaugeOn(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Turns the micro-ion gauge on or off.

setGaugeOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setHighIntPressure(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets high integration pressure.

setIdentify(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the identify state.

setLock(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the state of the protected function lock.

setLock(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the state of the protected function lock.

setLock(Test9XX.OnOff) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setLock(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the protected settings lock.

setLowIntPressure(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets low integration pressure.

setMiDegasOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns a micro-ion gauge degas cycle on or off.

setMiDegasTime(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the micro-ion gauge degas time.

setMiDelayOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns the micro-ion gauge delay on or off.

setMiDelayTime(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the micro-ion gauge delay time.

setMiGaugeOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns the micro-ion gauge on or off.

setMiSwitchPressure(double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the micro-ion current switch pressure.

setMSPOff() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the mass spectrometer off --- usually to avoid light

setMSPOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the mass spectrometer on.

setOffPressureCC(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets cold cathode turn-off pressure.

setOffset(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the address offset.

setOnPressureCC(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets cold cathode turn-on pressure.

setPressureDisp(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the pressure display type.

setPressureIndOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns on or off the pressure indication when the micro-ion gauge is off.

setPressureUnit(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the pressure unit.

setPressureUnit(Model9XX.Unit) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the pressure unit.

setRelayDelayed(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the relay trip delayed state.

setRelayDirection(int, Model9XX.Direction) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets a relay trip direction.

setRelayDirn(int, Model9XX.Direction) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setRelayEnable(int, Model9XX.Enable) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the enabled state of a relay.

setRelayEnable(int, Model9XX.Enable) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setRelayHyst(int, double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets a relay hysteresis value.

setRelayHyst(int, double) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setRelayTrip(int, int, double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets a trip relay set point.

setRelayTrip(int, int, double) - Method in class org.lsst.ccs.drivers.mks.GP835

Sets a trip relay set point.

setRelayTrip(int, double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets a relay set point.

setRelayTrip(int, double) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setRelayTrip(int, TestGP390.TripType, double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets a trip relay set point.

setRelayTrip(int, int, double) - Method in class org.lsst.ccs.drivers.mks.TestGP835

setSensorDoseLimit(double) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets cold cathode pressure dose limit.

setSwitchEnable(boolean) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the switch enabled state.

setSwitchPressure(double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the micro-ion gauge switch pressure.

setTimeout(double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the read timeout.

setTimeout(double) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setTimeout(double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the response timeout.

setUnits(Model9XX.Unit) - Method in class org.lsst.ccs.drivers.mks.Test9XX

setUnits(TestGP390.Units) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the pressure units.

setUnits(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the baud rate.

setUserTag(String) - Method in class org.lsst.ccs.drivers.mks.Model9XX

Sets the user tag.

setUserTag(String) - Method in class org.lsst.ccs.drivers.mks.Test9XX

showAnalogOut(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

showAtmospheric() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showAtmospheric() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the atmospheric pressure.

showBaud() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showCurrent() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge current.

showDegas() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge degas state.

showDegasTime() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge degas time.

showDelay() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge delay state.

showDelayTime() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge delay time.

showDevice() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showDeviceNum() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showFilament() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the filament status.

showFwVersion() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showFwVersion() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the firmware version.

showGasType() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showGauge() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge state.

showHwVersion() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showManufacturer() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showModel() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showOnTime() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showPart() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showRelayAssign(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Gets the vacuum type assignment for a trip relay.

showRelayDirn(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

showRelayEnable(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

showRelayHyst(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

showRelayTrip(int) - Method in class org.lsst.ccs.drivers.mks.Test9XX

showRelayTrip(int, TestGP390.TripType) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows a trip relay set point.

showSensorDose() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showSensorTime() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showSerial() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showStatus() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showStatusWord() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the status word.

showSwitchPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge switch pressure.

showUnits() - Method in class org.lsst.ccs.drivers.mks.Test9XX

showUnits() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the pressure units.

showUserTag() - Method in class org.lsst.ccs.drivers.mks.Test9XX

T

Test9XX - Class in org.lsst.ccs.drivers.mks

Program to test the MKS models 972B, 974B & 925 vacuum gauge driver

Test9XX() - Constructor for class org.lsst.ccs.drivers.mks.Test9XX

Test9XX.OnOff - Enum in org.lsst.ccs.drivers.mks

TestGP390 - Class in org.lsst.ccs.drivers.mks

Program to test the MKS GP390 vacuum gauge driver

TestGP390() - Constructor for class org.lsst.ccs.drivers.mks.TestGP390

TestGP390.Fmode - Enum in org.lsst.ccs.drivers.mks

TestGP390.OnOff - Enum in org.lsst.ccs.drivers.mks

TestGP390.TripType - Enum in org.lsst.ccs.drivers.mks

TestGP390.Units - Enum in org.lsst.ccs.drivers.mks

TestGP390.VacType - Enum in org.lsst.ccs.drivers.mks

TestGP835 - Class in org.lsst.ccs.drivers.mks

Program to test the GP835 device driver

TestGP835() - Constructor for class org.lsst.ccs.drivers.mks.TestGP835

toggleLock() - Method in class org.lsst.ccs.drivers.mks.GP390

Toggles protected function lock.

toggleLock() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Toggles the protected settings lock.

U

UNIT_MBAR - Static variable in class org.lsst.ccs.drivers.mks.GP390

UNIT_PA - Static variable in class org.lsst.ccs.drivers.mks.GP390

UNIT_TORR - Static variable in class org.lsst.ccs.drivers.mks.GP390

unlock() - Method in class org.lsst.ccs.drivers.mks.GP390

Unlocks protected functions (one time).

unlock() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Unlocks protected settings.

V

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.GP390.ConnType

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Default

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Direction

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Enable

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Gas

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Sensor

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Unit

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.Test9XX.OnOff

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Fmode

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.OnOff

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.TripType

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Units

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.VacType

Returns the enum constant of this type with the specified name.

values() - Static method in enum org.lsst.ccs.drivers.mks.GP390.ConnType

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Default

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Direction

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Enable

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Gas

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Sensor

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.Model9XX.Unit

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.Test9XX.OnOff

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Fmode

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.OnOff

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.TripType

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Units

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.VacType

Returns an array containing the constants of this enum type, in the order they are declared.

W

write(String) - Method in class org.lsst.ccs.drivers.mks.Test9XX

A C D E F G I M O R S T U V W