A C D E F G I M O R S T U V

A

assignRelay(int, int) - Method in class org.lsst.ccs.drivers.mks.GP390

Assigns a trip relay to a vacuum type.

assignRelay(int, int) - Method in class org.lsst.ccs.drivers.mks.GP835

Assigns a trip relay to a vacuum type.

assignRelay(int, TestGP390.VacType) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Assigns a trip relay to a vacuum type.

assignRelay(int, int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

C

calibrateAtmospheric() - Method in class org.lsst.ccs.drivers.mks.GP390

Calibrates at atmospheric pressure.

calibrateVacuum() - Method in class org.lsst.ccs.drivers.mks.GP390

Calibrates at vacuum pressure.

checkOpenGP390() - Method in class org.lsst.ccs.drivers.mks.GP835

Checks that GP390 connection is open.

close() - Method in class org.lsst.ccs.drivers.mks.GP390

Closes the connection.

close() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Closes the connection.

D

DISP_ABS - Static variable in class org.lsst.ccs.drivers.mks.GP390

DISP_BOTH - Static variable in class org.lsst.ccs.drivers.mks.GP390

DISP_DIFF - Static variable in class org.lsst.ccs.drivers.mks.GP390

E

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Enables/disables a trip relay.

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.GP835

Enables/disables a trip relay.

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Enables/disables a trip relay.

enableRelay(int, boolean) - Method in class org.lsst.ccs.drivers.mks.TestGP835

F

FMODE_ALT - Static variable in class org.lsst.ccs.drivers.mks.GP390

FMODE_AUTO - Static variable in class org.lsst.ccs.drivers.mks.GP390

FMODE_MAN - Static variable in class org.lsst.ccs.drivers.mks.GP390

G

getAtmospheric() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the atmospheric pressure.

getFilamentPower() - Method in class org.lsst.ccs.drivers.mks.GP835

Returns the filament power

getFilamentPower() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getFilamentStatus() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the filament status.

getFwVersion() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the firmware version.

getInstrument() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the currently selected instrument

getInstrument() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getMiDegasTime() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge degas time.

getMiDelayTime() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge delay time.

getMiGaugeCurrent() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge current.

getMiGaugeMode() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion gauge mode.

getMiSwitchPressure() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the micro-ion current switch pressure.

getMSP() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the mass spectrometer scan results

getMSP() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getPressure() - Method in class org.lsst.ccs.drivers.mks.GP835

Returns the pressure

getPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getPressureGP390() - Method in class org.lsst.ccs.drivers.mks.GP835

Returns the pressure directly from the GP390

getPressureGP390() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getPressureUnit() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the pressure unit.

getRelayAssignment(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the assignment for a trip relay.

getRelayAssignment(int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the assignment for a trip relay.

getRelayAssignment(int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

getRelayTrip(int, int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets a trip relay set point.

getRelayTrip(int, int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets a trip relay set point.

getRelayTrip(int, int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

getStatusStrings() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the array of status strings.

getStatusWord() - Method in class org.lsst.ccs.drivers.mks.GP390

Gets the status word.

getTestReport() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets the test report

getTestReport() - Method in class org.lsst.ccs.drivers.mks.TestGP835

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.Fmode

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.TripType

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.Units

getValue() - Method in enum org.lsst.ccs.drivers.mks.TestGP390.VacType

GMODE_DEGAS - Static variable in class org.lsst.ccs.drivers.mks.GP390

GMODE_HIGH - Static variable in class org.lsst.ccs.drivers.mks.GP390

GMODE_LOW - Static variable in class org.lsst.ccs.drivers.mks.GP390

GMODE_OFF - Static variable in class org.lsst.ccs.drivers.mks.GP390

GP390 - Class in org.lsst.ccs.drivers.mks

Routines for communicating with an MKS GP390 series vacuum gauge

GP390() - Constructor for class org.lsst.ccs.drivers.mks.GP390

GP390.ConnType - Enum in org.lsst.ccs.drivers.mks

Constants & data.

GP835 - Class in org.lsst.ccs.drivers.mks

General access routines for the GP835 device

GP835() - Constructor for class org.lsst.ccs.drivers.mks.GP835

Constructor

I

isFilamentOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether the vacuum gauge micro-ion filament is on

isFilamentOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

isGaugeOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether the vacuum gauge is on

isGaugeOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

isMiDegasOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether a micro-ion gauge degas is on or off.

isMiDelayOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether the micro-ion gauge delay is on or off.

isMiGaugeOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether the micro-ion gauge is on or off.

isPressureIndOn() - Method in class org.lsst.ccs.drivers.mks.GP390

Tests whether the pressure indication is on or off.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets whether a trip relay is active.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether a trip relay is active.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Gets whether a trip relay is active.

isRelayActive(int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Gets whether a trip relay is enabled.

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.GP835

Gets whether a trip relay is enabled.

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows whether a trip relay is enabled.

isRelayEnabled(int) - Method in class org.lsst.ccs.drivers.mks.TestGP835

M

monPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP835

mydev - Variable in class org.lsst.ccs.drivers.mks.TestGP835

O

open(GP390.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.mks.GP390

Opens a connection.

open(DriverConstants.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.mks.GP835

Opens a connection.

open(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Opens a serial connection.

open(GP390.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Opens connection to a device.

open(DriverConstants.ConnType, String) - Method in class org.lsst.ccs.drivers.mks.TestGP835

openftdi(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Opens an FTDI connection.

org.lsst.ccs.drivers.mks - package org.lsst.ccs.drivers.mks

R

readAMU() - Method in class org.lsst.ccs.drivers.mks.GP835

Reads the AMU data

readDiffPressure() - Method in class org.lsst.ccs.drivers.mks.GP390

Reads the differential pressure.

readDiffPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Reads the differential pressure.

readDoublePairArray(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Reads a double pair array with SCPI error checking after writing a command.

readGP390(String) - Method in class org.lsst.ccs.drivers.mks.GP835

Sends a GP390 command and returns the result

readGP390(String, String...) - Method in class org.lsst.ccs.drivers.mks.TestGP835

readPressure() - Method in class org.lsst.ccs.drivers.mks.GP390

Reads the vacuum pressure.

readPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Reads the vacuum pressure.

RELAY_ABS - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_ACT - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_DEACT - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_DIFF - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_MAX - Static variable in class org.lsst.ccs.drivers.mks.GP390

RELAY_MIN - Static variable in class org.lsst.ccs.drivers.mks.GP390

reset() - Method in class org.lsst.ccs.drivers.mks.GP390

Resets to power-up state.

reset() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Resets to power-on state.

S

setAddressOffset(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the address offset.

setAtmospheric(double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the atmospheric pressure.

setAtmospheric(double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the atmospheric pressure.

setBaudRate(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the baud rate.

setCommDefaults() - Method in class org.lsst.ccs.drivers.mks.GP390

Sets communications defaults.

setDefaults() - Method in class org.lsst.ccs.drivers.mks.GP390

Sets factory defaults.

setDefaults() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets values to factory defaults.

setDegasOn(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Turns the micro-ion gauge degas on or off.

setDegasTime(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the micro-ion gauge degas time.

setDelayOn(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Turns the micro-ion gauge delay on or off.

setDelayTime(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the micro-ion gauge delay time.

setFilament(TestGP390.Fmode) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the filament mode.

setFilamentMode(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the filament mode.

setFilamentOff() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the vacuum gauge micro-ion filament off --- usually to avoid light

setFilamentOff() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setFilamentOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the vacuum gauge micro-ion filament on.

setFilamentOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setGaugeOff() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the whole vacuum gauge off --- usually to avoid light

setGaugeOff() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setGaugeOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the whole vacuum gauge on.

setGaugeOn(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Turns the micro-ion gauge on or off.

setGaugeOn() - Method in class org.lsst.ccs.drivers.mks.TestGP835

setLock(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the state of the protected function lock.

setLock(TestGP390.OnOff) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the protected settings lock.

setMiDegasOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns a micro-ion gauge degas cycle on or off.

setMiDegasTime(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the micro-ion gauge degas time.

setMiDelayOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns the micro-ion gauge delay on or off.

setMiDelayTime(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the micro-ion gauge delay time.

setMiGaugeOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns the micro-ion gauge on or off.

setMiSwitchPressure(double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the micro-ion current switch pressure.

setMSPOff() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the mass spectrometer off --- usually to avoid light

setMSPOn() - Method in class org.lsst.ccs.drivers.mks.GP835

Sets the mass spectrometer on.

setOffset(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the address offset.

setPressureDisp(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the pressure display type.

setPressureIndOn(boolean) - Method in class org.lsst.ccs.drivers.mks.GP390

Turns on or off the pressure indication when the micro-ion gauge is off.

setPressureUnit(int) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the pressure unit.

setRelayTrip(int, int, double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets a trip relay set point.

setRelayTrip(int, int, double) - Method in class org.lsst.ccs.drivers.mks.GP835

Sets a trip relay set point.

setRelayTrip(int, TestGP390.TripType, double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets a trip relay set point.

setRelayTrip(int, int, double) - Method in class org.lsst.ccs.drivers.mks.TestGP835

setSwitchPressure(double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the micro-ion gauge switch pressure.

setTimeout(double) - Method in class org.lsst.ccs.drivers.mks.GP390

Sets the read timeout.

setTimeout(double) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the response timeout.

setUnits(TestGP390.Units) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the pressure units.

setUnits(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Sets the baud rate.

showAtmospheric() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the atmospheric pressure.

showCurrent() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge current.

showDegas() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge degas state.

showDegasTime() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge degas time.

showDelay() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge delay state.

showDelayTime() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge delay time.

showFilament() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the filament status.

showFwVersion() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the firmware version.

showGauge() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge state.

showRelayAssign(int) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Gets the vacuum type assignment for a trip relay.

showRelayTrip(int, TestGP390.TripType) - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows a trip relay set point.

showStatusWord() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the status word.

showSwitchPressure() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the micro-ion gauge switch pressure.

showUnits() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Shows the pressure units.

T

TestGP390 - Class in org.lsst.ccs.drivers.mks

Program to test the MKS GP390 vacuum gauge driver

TestGP390() - Constructor for class org.lsst.ccs.drivers.mks.TestGP390

TestGP390.Fmode - Enum in org.lsst.ccs.drivers.mks

TestGP390.OnOff - Enum in org.lsst.ccs.drivers.mks

TestGP390.TripType - Enum in org.lsst.ccs.drivers.mks

TestGP390.Units - Enum in org.lsst.ccs.drivers.mks

TestGP390.VacType - Enum in org.lsst.ccs.drivers.mks

TestGP835 - Class in org.lsst.ccs.drivers.mks

Program to test the GP835 device driver

TestGP835() - Constructor for class org.lsst.ccs.drivers.mks.TestGP835

toggleLock() - Method in class org.lsst.ccs.drivers.mks.GP390

Toggles protected function lock.

toggleLock() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Toggles the protected settings lock.

U

UNIT_MBAR - Static variable in class org.lsst.ccs.drivers.mks.GP390

UNIT_PA - Static variable in class org.lsst.ccs.drivers.mks.GP390

UNIT_TORR - Static variable in class org.lsst.ccs.drivers.mks.GP390

unlock() - Method in class org.lsst.ccs.drivers.mks.GP390

Unlocks protected functions (one time).

unlock() - Method in class org.lsst.ccs.drivers.mks.TestGP390

Unlocks protected settings.

V

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.GP390.ConnType

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Fmode

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.OnOff

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.TripType

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Units

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.VacType

Returns the enum constant of this type with the specified name.

values() - Static method in enum org.lsst.ccs.drivers.mks.GP390.ConnType

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Fmode

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.OnOff

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.TripType

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.Units

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.mks.TestGP390.VacType

Returns an array containing the constants of this enum type, in the order they are declared.

A C D E F G I M O R S T U V