- calCfg(int, TestMccUsb.CalPol, TestMccUsb.CalPath) - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Configures a calibration.
- calConfig(int, int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Configures the calibration MUX
- calibrate(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Calibrates the ADC channels
- calibrate(TestMccUsb.CalType) - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Performs a calibration.
- calSteps(int[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Gets the number of calibration steps
- CEX_10UA - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Current excitation - 10 microamps
- CEX_210UA - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Current excitation - 210 microamps
- CEX_OFF - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Current excitation - off
- CIT_ADC_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Configuration item - ADC 0
- CIT_ADC_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Configuration item - ADC 1
- CIT_ADC_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Configuration item - ADC 2
- CIT_ADC_3 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Configuration item - ADC 3
- close() - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Closes the connection to the device
- close() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Closes a connection.
- cntrInit() - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Initializes the event counter (sets it to zero)
- cntrinit() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Initializes the counter.
- cntrRead() - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Reads the event counter
- cntrread() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Reads the counter.
- configAlarm(int, int, int, float, float) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Configures an alarm
- CSI_CH_0_COEF_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 0 coefficient 0
- CSI_CH_0_COEF_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 0 coefficient 1
- CSI_CH_0_COEF_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 0 coefficient 2
- CSI_CH_0_COEF_3 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 0 coefficient 3
- CSI_CH_0_GAIN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 0 gain value
- CSI_CH_0_TC - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Thermocouple type for channel 0
- CSI_CH_0_VCONN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Input type for ADC 2&3 channel 0
- CSI_CH_1_COEF_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 1 coefficient 0
- CSI_CH_1_COEF_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 1 coefficient 1
- CSI_CH_1_COEF_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 1 coefficient 2
- CSI_CH_1_COEF_3 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 1 coefficient 3
- CSI_CH_1_GAIN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Channel 1 gain value
- CSI_CH_1_TC - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Thermocouple type for channel 1
- CSI_CH_1_VCONN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Input type for ADC 2&3 channel 1
- CSI_CONN_TYPE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Connection type for RTD & Thermistor Sensors
- CSI_EXCITATION - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Current excitation
- CSI_FILTER_RATE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Filter update rate
- CSI_I_VALUE_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Measured I value @ 10uA
- CSI_I_VALUE_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Measured I value @ 210uA
- CSI_I_VALUE_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Measured I value @ 10uA (3 wire conn)
- CSI_SENSOR_TYPE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Connected sensor type
- CSI_V_VALUE_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Measured V value @ 10uA
- CSI_V_VALUE_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Measured V value @ 210uA
- CSI_V_VALUE_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Measured V value @ 210uA (3 wire conn)
- CSI_VREF - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Config subitem - Measured Vref value
- setCoefficient(int, int, float) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a channel's coefficient
- setExcitation(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a channel pair's current excitation
- setGain(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a channel's gain
- setItem(int, int, float) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a configuration item
- setSensorType(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a channel pair's sensor type
- setTCType(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a channel's thermocouple type
- setThermConnType(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a thermistor or RTD channel pair's connection type
- setVoltageConnType(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sets a voltage channel's connection type
- showBurn(int) - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Shows and resets the burnout status.
- showCal() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Shows the number of calibration steps.
- showChan(int, TestMccUsb.DispType) - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Shows channel configuration.
- showChan(TestMccUsb.DispType) - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Shows configuration of all channels.
- showChan() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Shows brief configuration of all channels.
- showDev() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Shows the name of the open device.
- status() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb
-
Shows the calibration status.
- STP_DISABLED - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sensor type - Disabled
- STP_RTD - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sensor type - RTD
- STP_SEMICONDUCTOR - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sensor type - Semiconductor
- STP_THERMISTOR - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sensor type - Thermistor
- STP_THERMOCOUPLE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sensor type - Thermocouple
- STP_VOLTAGE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Sensor type - Voltage
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.AdUnits
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.CalPath
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.CalPol
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.CalType
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.DevName
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.DispType
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.ItemName
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.SubiName
-
Returns the enum constant of this type with the specified name.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.AdUnits
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.CalPath
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.CalPol
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.CalType
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.DevName
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.DispType
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.ItemName
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum org.lsst.ccs.drivers.mcc.TestMccUsb.SubiName
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- VCT_CALIBRATION - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Voltage connection - calibration
- VCT_DIFFERENTIAL - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Voltage connection - differential
- VCT_GROUNDED - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Voltage connection - grounded
- VCT_SINGLE_ENDED - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb
-
Voltage connection - single-ended