A B C D F G M O P R S T U V W

A

adcIn(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Reads an ADC channel

adcScan(int, int, int, float[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Scans ADC channels

B

blink() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Blinks the LED

C

calConfig(int, int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Configures the calibration MUX

calibrate(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Calibrates the ADC channels

calSteps(int[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets the number of calibration steps

CEX_10UA - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Current excitation - 10 microamps

CEX_210UA - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Current excitation - 210 microamps

CEX_OFF - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Current excitation - off

CIT_ADC_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Configuration item - ADC 0

CIT_ADC_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Configuration item - ADC 1

CIT_ADC_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Configuration item - ADC 2

CIT_ADC_3 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Configuration item - ADC 3

close() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Closes the connection to the device

cntrInit() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Initializes the event counter (sets it to zero)

cntrRead() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Reads the event counter

configAlarm(int, int, int, float, float) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Configures an alarm

CSI_CH_0_COEF_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 0 coefficient 0

CSI_CH_0_COEF_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 0 coefficient 1

CSI_CH_0_COEF_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 0 coefficient 2

CSI_CH_0_COEF_3 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 0 coefficient 3

CSI_CH_0_GAIN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 0 gain value

CSI_CH_0_TC - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Thermocouple type for channel 0

CSI_CH_0_VCONN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Input type for ADC 2&3 channel 0

CSI_CH_1_COEF_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 1 coefficient 0

CSI_CH_1_COEF_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 1 coefficient 1

CSI_CH_1_COEF_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 1 coefficient 2

CSI_CH_1_COEF_3 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 1 coefficient 3

CSI_CH_1_GAIN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Channel 1 gain value

CSI_CH_1_TC - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Thermocouple type for channel 1

CSI_CH_1_VCONN - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Input type for ADC 2&3 channel 1

CSI_CONN_TYPE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Connection type for RTD & Thermistor Sensors

CSI_EXCITATION - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Current excitation

CSI_FILTER_RATE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Filter update rate

CSI_I_VALUE_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Measured I value @ 10uA

CSI_I_VALUE_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Measured I value @ 210uA

CSI_I_VALUE_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Measured I value @ 10uA (3 wire conn)

CSI_SENSOR_TYPE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Connected sensor type

CSI_V_VALUE_0 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Measured V value @ 10uA

CSI_V_VALUE_1 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Measured V value @ 210uA

CSI_V_VALUE_2 - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Measured V value @ 210uA (3 wire conn)

CSI_VREF - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Config subitem - Measured Vref value

D

dioConfig(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Configures the DIO port

dioConfigBit(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Configures one DIO line

dioIn() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Reads all the DIO lines

dioInBit(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Reads one DIO line

dioOut(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Writes all the DIO lines

dioOutBit(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Writes one DIO line

dispatch(int, Scanner) - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb

Dispatch command for processing - exception-free version

F

FREQ_10_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 10 Hz

FREQ_125_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 125 Hz

FREQ_12_5_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 12.5 Hz

FREQ_16_7_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 16.7 Hz

FREQ_19_6_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 19.6 Hz

FREQ_250_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 250 Hz

FREQ_33_3_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 33.3 Hz

FREQ_39_2_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 39.2 Hz

FREQ_4_17_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 4.17 Hz

FREQ_500_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 500 Hz

FREQ_50_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 50 Hz

FREQ_62_5_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 62.5 Hz

FREQ_6_25_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 6.25 Hz

FREQ_8_33_HZ - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Filter rate - 8.33 Hz

G

GAIN_128X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 128X

GAIN_16X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 16X

GAIN_1X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 1X

GAIN_2X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 2X

GAIN_32X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 32X

GAIN_4X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 4X

GAIN_64X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 64X

GAIN_8X - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Gain - 8X

getAlarmConfig(int, int[], float[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets an alarm configuration

getBurnout(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets the burnout status and clears it under a mask

getDevId() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets the device ID

getFilterRate(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a channel's filter update rate

getGain(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a channel's gain

getItem(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a configuration item

getReferenceVoltage(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a channel's reference voltage

getSensorType(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a channel's sensor type

getStatus() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets the calibration status

getTCType(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a channel's thermocouple type

getThermConnType(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a thermistor or RTD channel's connection type

getUsbComm() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets the USB communication object

getVoltageConnType(int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Gets a voltage channel's connection type

M

main(String[]) - Static method in class org.lsst.ccs.drivers.mcc.TestMccUsb

Main program

MccTc - Class in org.lsst.ccs.drivers.mcc

Access a Measurement Computing USB-TC-AI device

MccTc() - Constructor for class org.lsst.ccs.drivers.mcc.MccTc

Constructor

MccTcAi - Class in org.lsst.ccs.drivers.mcc

Access a Measurement Computing USB-TC-AI device

MccTcAi() - Constructor for class org.lsst.ccs.drivers.mcc.MccTcAi

Constructor

MccUsb - Class in org.lsst.ccs.drivers.mcc

Enables access to a Measurement Computing data acquisition device

MccUsb() - Constructor for class org.lsst.ccs.drivers.mcc.MccUsb

Constructor

MccUsbException - Exception in org.lsst.ccs.drivers.mcc

MccUsbException() - Constructor for exception org.lsst.ccs.drivers.mcc.MccUsbException

MccUsbException(String) - Constructor for exception org.lsst.ccs.drivers.mcc.MccUsbException

O

open(String, boolean) - Method in class org.lsst.ccs.drivers.mcc.MccTc

Opens device connection

open(String, boolean) - Method in class org.lsst.ccs.drivers.mcc.MccTcAi

Opens device connection

open(int, String, boolean) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Opens a connection to the device

org.lsst.ccs.drivers.mcc - package org.lsst.ccs.drivers.mcc

P

prepareDownload(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Prepares for a download

R

RANGE_10V - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage range +/- 10V

RANGE_1_25V - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage range +/- 1.25V

RANGE_2_5V - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage range +/- 2.5V

RANGE_5V - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage range +/- 5V

readCode(int, int, byte[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Reads firmware code

readMemory(int, int, int, byte[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Reads device memory

reset() - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Resets the device

run() - Method in class org.lsst.ccs.drivers.mcc.TestMccUsb

Run the test Loops reading and processing each new typed command line.

S

setGain(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Sets a channel's gain

setItem(int, int, float) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Sets a configuration item

setTCType(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Sets a channel's thermocouple type

setVoltageConnType(int, int) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Sets a voltage channel's connection type

STP_DISABLED - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Sensor type - Disabled

STP_RTD - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Sensor type - RTD

STP_SEMICONDUCTOR - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Sensor type - Semiconductor

STP_THERMISTOR - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Sensor type - Thermistor

STP_THERMOCOUPLE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Sensor type - Thermocouple

STP_VOLTAGE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Sensor type - Voltage

T

TC_TYPE_B - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type B

TC_TYPE_E - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type E

TC_TYPE_J - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type J

TC_TYPE_K - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type K

TC_TYPE_N - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type N

TC_TYPE_R - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type R

TC_TYPE_S - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type S

TC_TYPE_T - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Thermocouple type T

TCT_2WIRE_1SENSOR - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Therm connection - two wire, one sensor

TCT_2WIRE_2SENSOR - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Therm connection - two wire, two sensors

TCT_3WIRE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Therm connection - three wire

TCT_4WIRE - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Therm connection - four wire

TestMccUsb - Class in org.lsst.ccs.drivers.mcc

Program to test a Measurement Computing DAQ device

TestMccUsb(boolean) - Constructor for class org.lsst.ccs.drivers.mcc.TestMccUsb

Main constructor

U

USB_TC_AI_DID - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

The USB-TC-AI DAQ device

USB_TC_DID - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

The USB-TC DAQ device

V

VCT_CALIBRATION - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage connection - calibration

VCT_DIFFERENTIAL - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage connection - differential

VCT_GROUNDED - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage connection - grounded

VCT_SINGLE_ENDED - Static variable in class org.lsst.ccs.drivers.mcc.MccUsb

Voltage connection - single-ended

W

writeCode(int, int, byte[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Writes firmware code

writeMemory(int, int, int, byte[]) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Writes device memory

writeSerial(String) - Method in class org.lsst.ccs.drivers.mcc.MccUsb

Writes the serial number

A B C D F G M O P R S T U V W