C D E G I L M N O P R S T V W

C

CHAN_INFO_MODEL - Static variable in class org.lsst.ccs.drivers.agilent.N6700

CHAN_INFO_OPTION - Static variable in class org.lsst.ccs.drivers.agilent.N6700

CHAN_INFO_SERIAL - Static variable in class org.lsst.ccs.drivers.agilent.N6700

chanVoltage(int) - Method in class org.lsst.ccs.drivers.agilent.Device

chanVoltage(int) - Method in class org.lsst.ccs.drivers.agilent.DeviceTestShell

close() - Method in class org.lsst.ccs.drivers.agilent.E3631

Closes the connection.

configCurrent(double, int[]) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Configures channels for DC current reading.

configCurrent(double, int...) - Method in class org.lsst.ccs.drivers.agilent.TestDL34970

Configures for reading a current.

configTC(DL34970.TcType, int[]) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Configures channels for thermocouple reading.

configTC(DL34970.TcType, int...) - Method in class org.lsst.ccs.drivers.agilent.TestDL34970

Configures for reading a thermocouple.

configVolts(double, int[]) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Configures channels for DC voltage reading.

configVolts(double, int...) - Method in class org.lsst.ccs.drivers.agilent.TestDL34970

Configures for reading a voltage.

CURRENT_MODE - Static variable in class org.lsst.ccs.drivers.agilent.N6700

CURRENT_MODE - Static variable in class org.lsst.ccs.drivers.agilent.PowerSupply

currentLimit(double) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

D

DEFAULT_BAUDRATE - Static variable in class org.lsst.ccs.drivers.agilent.DL34970

DEFAULT_BAUDRATE - Static variable in class org.lsst.ccs.drivers.agilent.WG33250

DEFAULT_PORT - Static variable in class org.lsst.ccs.drivers.agilent.N6700

delayOff(double) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

delayOn(double) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

Device - Class in org.lsst.ccs.drivers.agilent

Enables access to a device

Device() - Constructor for class org.lsst.ccs.drivers.agilent.Device

DeviceTestShell - Class in org.lsst.ccs.drivers.agilent

Program to test a driver device

DeviceTestShell() - Constructor for class org.lsst.ccs.drivers.agilent.DeviceTestShell

DL34970 - Class in org.lsst.ccs.drivers.agilent

Basic routines for controlling an Agilent 34970A data logger.

DL34970() - Constructor for class org.lsst.ccs.drivers.agilent.DL34970

Constructor.

DL34970.TcType - Enum in org.lsst.ccs.drivers.agilent

E

E3631 - Class in org.lsst.ccs.drivers.agilent

General access routines for the Agilent E3631 Power Supply

E3631() - Constructor for class org.lsst.ccs.drivers.agilent.E3631

Constructor *

E3631.onOff - Enum in org.lsst.ccs.drivers.agilent

Public constants

E3631.OutputName - Enum in org.lsst.ccs.drivers.agilent

ERROR_VALUE - Static variable in class org.lsst.ccs.drivers.agilent.DL34970

G

getAmplitude() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the amplitude.

getAmplitude(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows an amplitude limit.

getAmplitude() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the signal amplitude.

getAmplitude(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a signal amplitude limit.

getChannel(int) - Method in class org.lsst.ccs.drivers.agilent.Device

getChannel() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the set channel.

getChannelInfo(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets channel information.

getCurrent() - Method in class org.lsst.ccs.drivers.agilent.E3631

Measure current for currently selected output

getCurrent(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

Measure current for a channel

getCurrent(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the set current.

getCurrent(int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the set currents.

getCurrent() - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

getCurrent() - Method in class org.lsst.ccs.drivers.agilent.TestE3631

getCurrent(String) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

getCurrent() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the set current.

getCurrent(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the set current(s).

getCurrentLimit(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the current limit.

getCurrentLimit() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the soft current limit.

getCurrentLimit(int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the soft current limit.

getDutyCycle() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the square wave duty cycle.

getDutyCycle(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a square wave duty cycle limit.

getDutyCycle() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the square wave duty cycle.

getDutyCycle(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a square wave duty cycle limit.

getError() - Method in class org.lsst.ccs.drivers.agilent.E3631

Get the E36311 error status

getFrequency() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the frequency.

getFrequency(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a frequency limit.

getFrequency() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the signal frequency.

getFrequency(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a signal frequency limit.

getFunction() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the function.

getFunction() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the generator function.

getHighLevel() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the high level.

getHighlevel(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a high level limit.

getHighLevel() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the high signal level.

getHighLevel(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a high signal level limit.

getID() - Method in class org.lsst.ccs.drivers.agilent.E3631

Get the E3631 ID

getLowLevel() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the low level.

getLowlevel(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a low level limit.

getLowLevel() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the low signal level.

getLowLevel(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a low signal level limit.

getOffDelay(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the output-off delay.

getOffDelay(int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets output-off delays.

getOffDelay() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the output-off delay.

getOffDelay(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the output-off delay.

getOffset() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the offset.

getOffset(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows an offset limit.

getOffset() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the signal offset.

getOffset(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a signal offset limit.

getOnDelay(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the output-on delay.

getOnDelay(int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets output-on delays.

getOnDelay() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the output-on delay.

getOnDelay(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the output-on delay(s).

getOutput() - Method in class org.lsst.ccs.drivers.agilent.E3631

Ask which output is currently selected

getOutput(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the output state.

getOutput(int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets output states.

getOutput() - Method in class org.lsst.ccs.drivers.agilent.TestE3631

getOutputLoad() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the output load.

getOutputLoad(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows an output load limit.

getOutputLoad() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the output load.

getOutputLoad(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets an output load limit.

getPolarity() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the signal polarity.

getPulsePeriod() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the pulse period.

getPulsePeriod(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a pulse period limit.

getPulsePeriod() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the pulse period.

getPulsePeriod(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a pulse period limit.

getPulseTransition() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the pulse transition time.

getPulseTransition(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a pulse transition time limit.

getPulseTransition() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the pulse transition time.

getPulseTransition(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a pulse transition time limit.

getPulseWidth() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the pulse width.

getPulseWidth(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a pulse width limit.

getPulseWidth() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the pulse width.

getPulseWidth(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a pulse width limit.

getReply(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

getReply(String command) Send a command, and wait for a reply.

getSymmetry() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the ramp symmetry.

getSymmetry(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows a ramp symmetry limit.

getSymmetry() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the ramp symmetry.

getSymmetry(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets a ramp symmetry limit.

getUnit() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the amplitude unit.

getUnit() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the amplitude unit.

getValue() - Method in enum org.lsst.ccs.drivers.agilent.E3631.OutputName

getVoltage() - Method in class org.lsst.ccs.drivers.agilent.E3631

getVoltage: Measure voltage for current output

getVoltage(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

getVoltage: Measure voltage for a channel

getVoltage(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the set voltage.

getVoltage(int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets set voltages.

getVoltage() - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

getVoltage() - Method in class org.lsst.ccs.drivers.agilent.TestE3631

getVoltage(String) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

getVoltage() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the set voltage.

getVoltage(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the set voltage(s).

getVoltageLimit(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Gets the voltage limit.

getVoltageLimit() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the soft voltage limit.

getVoltageLimit(int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the soft voltage limit.

I

init(String, int, int, double, double) - Method in class org.lsst.ccs.drivers.agilent.Device

init() - Method in class org.lsst.ccs.drivers.agilent.E3631

Initialize the instrument

isAutorangeOn() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the autorange on state.

isOutputOn() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the front-panel output on state.

isSyncOutputOn() - Method in class org.lsst.ccs.drivers.agilent.WG33250

Gets the front-panel sync output on state.

L

load(String, String) - Method in class org.lsst.ccs.drivers.agilent.DeviceTestShell

M

MAX_CHANNEL - Static variable in class org.lsst.ccs.drivers.agilent.N6700

MIN_CHANNEL - Static variable in class org.lsst.ccs.drivers.agilent.N6700

mode(int) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

MYDEV0_DID - Static variable in class org.lsst.ccs.drivers.agilent.Device

The First of our devices

N

N6700 - Class in org.lsst.ccs.drivers.agilent

Routines for controlling an Agilent N6700 series modular power supply

N6700() - Constructor for class org.lsst.ccs.drivers.agilent.N6700

Constructor.

NUM_CHANNELS - Static variable in class org.lsst.ccs.drivers.agilent.N6700

O

off() - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

on() - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

open(int, int, double, double) - Method in class org.lsst.ccs.drivers.agilent.DeviceTestShell

open(DriverConstants.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Opens a connection.

open(DriverConstants.ConnType, String, int) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Opens a connection.

open(String, int) - Method in class org.lsst.ccs.drivers.agilent.E3631

Opens a connection.

open(DriverConstants.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Opens a connection.

open(String) - Method in class org.lsst.ccs.drivers.agilent.N6700

Opens a connection.

open(String, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Opens a connection.

open(DriverConstants.ConnType, String) - Method in class org.lsst.ccs.drivers.agilent.TestDL34970

Opens connection to a device.

open(String, int) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

Opens connection to a device.

open(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Opens connection to a device.

open(String, int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Opens connection to a device.

open(DriverConstants.ConnType, String) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Opens connection to a device.

open(DriverConstants.ConnType, String, int, int) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Opens a connection.

open(DriverConstants.ConnType, String, int) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Opens a connection.

openftdi(String, int) - Method in class org.lsst.ccs.drivers.agilent.E3631

Opens an FTDI connection.

openftdi(String, int) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

Opens connection to a device.

org.lsst.ccs.drivers.agilent - package org.lsst.ccs.drivers.agilent

outputEnable(boolean) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

outputOff(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

outputOff: Turn an output off

outputOff(String) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

outputOn(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

Turn an output on

outputOn(String) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

P

powerOff() - Method in class org.lsst.ccs.drivers.agilent.Device

powerOff() - Method in class org.lsst.ccs.drivers.agilent.DeviceTestShell

powerOn() - Method in class org.lsst.ccs.drivers.agilent.Device

powerOn() - Method in class org.lsst.ccs.drivers.agilent.DeviceTestShell

PowerSupply - Class in org.lsst.ccs.drivers.agilent

PowerSupply(String, int) - Constructor for class org.lsst.ccs.drivers.agilent.PowerSupply

PowerSupply(String, int, int) - Constructor for class org.lsst.ccs.drivers.agilent.PowerSupply

ps - Variable in class org.lsst.ccs.drivers.agilent.TestE3631

R

RAW_ERROR_VALUE - Static variable in class org.lsst.ccs.drivers.agilent.DL34970

readCurrent(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Reads the current.

readCurrent(int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Reads currents.

readCurrent() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Reads the actual current.

readCurrent(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Reads the actual current(s).

readData() - Method in class org.lsst.ccs.drivers.agilent.DL34970

Reads data from channels in scan list.

readData(int) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Reads data from one channel.

readData(int[]) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Reads data from specified channels.

readData(int...) - Method in class org.lsst.ccs.drivers.agilent.TestDL34970

Reads channels.

readE3631() - Method in class org.lsst.ccs.drivers.agilent.E3631

Reads a response.

readE3631(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

Reads a response after writing a command.

readiden() - Method in class org.lsst.ccs.drivers.agilent.TestE3631

readVoltage(int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Reads the voltage.

readVoltage(int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Reads voltages.

readVoltage() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Reads the actual voltage.

readVoltage(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Reads the actual voltage(s).

reset() - Method in class org.lsst.ccs.drivers.agilent.E3631

reset the E36311

S

selectOutput(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

Select one of the outputs for control

selectOutput(String) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

sendCommand(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

sendCommand(String command) Send a command, but do not wait for a reply other than to check for the acknowledgment of that command

setAmplitude(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the amplitude.

setAmplitude(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the signal amplitude.

setAmplitude(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the signal amplitude to a limit.

setAutorange(WG33250.Autorange) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the autorange value.

setChannel(int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the channel.

setCurrent(String, double) - Method in class org.lsst.ccs.drivers.agilent.E3631

Set current for a channel

setCurrent(double, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the current.

setCurrent(double) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

setCurrent(double) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the current.

setCurrent(double, int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the current.

setCurrentLimit(double, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the current limit.

setCurrentLimit(double) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the soft current limit.

setCurrentLimit(double, int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the soft current limit.

setDutyCycle(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the square wave duty cycle.

setDutyCycle(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the square wave duty cycle.

setDutyCycle(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the square wave duty cycle to a limit.

setFakeout(Boolean) - Method in class org.lsst.ccs.drivers.agilent.E3631

Set to true if in simulation mode

setFakeout(Boolean) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

setFrequency(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the frequency.

setFrequency(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the signal frequency.

setFrequency(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the signal frequency to a limit.

setFunction(WG33250.Function) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the generator function.

setFunction(WG33250.Function) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the generator function.

setHighLevel(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the high level.

setHighLevel(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the high signal level.

setHighLevel(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the high signal level to a limit.

setLowLevel(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the low level.

setLowLevel(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the low signal level.

setLowLevel(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the low signal level to a limit.

setOffDelay(double, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the output-off delay.

setOffDelay(double) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the output-off delay.

setOffDelay(double, int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the output-off delay.

setOffset(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the offset.

setOffset(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the signal offset.

setOffset(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the signal offset to a limit.

setOnDelay(double, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the output-on delay.

setOnDelay(double) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the output-on delay.

setOnDelay(double, int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the output-on delay.

setOutput(boolean, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Turns output on or off.

setOutput(boolean, int[]) - Method in class org.lsst.ccs.drivers.agilent.N6700

Turns outputs on or off.

setOutput(TestN6700.OnOff) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Turns the output on or off.

setOutput(TestN6700.OnOff, String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Turns the output(s) on or off.

setOutput(WG33250.Autorange) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the autorange state.

setOutput(TestWG33250.OnOff) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Turns the output on or off.

setOutput(boolean) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Turns front-panel output on or off.

setOutputLoad(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the output load.

setOutputLoad(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the output load.

setOutputLoad(WG33250.Load) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the output load to a limit or infinity.

setPolarity(WG33250.Polarity) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the polarity.

setPolarity(WG33250.Polarity) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the signal polarity.

setPriorityMode(int, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the priority mode (voltage or current).

setPulsePeriod(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the pulse period.

setPulsePeriod(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the pulse period.

setPulsePeriod(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the pulse period to a limit.

setPulseTransition(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the pulse transition time.

setPulseTransition(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the pulse transition time.

setPulseTransition(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the pulse transition time to a limit.

setPulseWidth(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the pulse width.

setPulseWidth(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the pulse width.

setPulseWidth(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the pulse width to a limit.

setScanList(int[]) - Method in class org.lsst.ccs.drivers.agilent.DL34970

Sets up the scan list.

setScanList(int...) - Method in class org.lsst.ccs.drivers.agilent.TestDL34970

Sets the scan list.

setSlewRate(double, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the slew rate.

setSymmetry(double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the ramp symmetry.

setSymmetry(double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the ramp symmetry.

setSymmetry(WG33250.Limit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the ramp symmetry to a limit.

setSyncOutput(TestWG33250.OnOff) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Turns the sync output on or off.

setSyncOutput(boolean) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Turns front-panel sync output on or off.

setTimeout(int) - Method in class org.lsst.ccs.drivers.agilent.E3631

Sets the receive timeout.

setUnit(WG33250.Unit) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Sets the amplitude unit.

setUnit(WG33250.Unit) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Sets the amplitude unit.

setVerbose(Boolean) - Method in class org.lsst.ccs.drivers.agilent.E3631

Set verbosity to either true or false

setVerbose(Boolean) - Method in class org.lsst.ccs.drivers.agilent.TestE3631

setVoltage(String, double) - Method in class org.lsst.ccs.drivers.agilent.E3631

Set voltage for a channel

setVoltage(double, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the voltage.

setVoltage(double) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

setVoltage(double) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the voltage.

setVoltage(double, int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the voltage.

setVoltageLimit(double, int) - Method in class org.lsst.ccs.drivers.agilent.N6700

Sets the voltage limit.

setVoltageLimit(double) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the soft voltage limit.

setVoltageLimit(double, int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Sets the soft voltage limit.

showAutorange() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the autorange state.

showChanInfo() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows channel information.

showChanInfo(int) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows channel information.

showOutput() - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the output state.

showOutput(String) - Method in class org.lsst.ccs.drivers.agilent.TestN6700

Shows the output state(s).

showOutput() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the output state.

showPolarity() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the polarity.

showSyncOutput() - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Shows the sync output state.

slew(double) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

start(WG33250.Function, double, double, double) - Method in class org.lsst.ccs.drivers.agilent.TestWG33250

Starts the generator using specified parameters.

start(WG33250.Function, double, double, double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

start(WG33250.Function, WG33250.Value, double, double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

start(WG33250.Function, double, WG33250.Value, double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

start(WG33250.Function, double, double, WG33250.Value) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

start(WG33250.Function, WG33250.Value, WG33250.Value, double) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

start(WG33250.Function, WG33250.Value, double, WG33250.Value) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

start(WG33250.Function, double, WG33250.Value, WG33250.Value) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

start(WG33250.Function, WG33250.Value, WG33250.Value, WG33250.Value) - Method in class org.lsst.ccs.drivers.agilent.WG33250

Starts the generator with the given parameters.

T

TestDL34970 - Class in org.lsst.ccs.drivers.agilent

Program to test the Agilent DL34970 device driver

TestDL34970() - Constructor for class org.lsst.ccs.drivers.agilent.TestDL34970

Constructor

TestE3631 - Class in org.lsst.ccs.drivers.agilent

Program to test the Agilent E3631 device driver

TestE3631() - Constructor for class org.lsst.ccs.drivers.agilent.TestE3631

TestE3631.OnOff - Enum in org.lsst.ccs.drivers.agilent

TestN6700 - Class in org.lsst.ccs.drivers.agilent

Program to test the Agilent N6700 device driver

TestN6700() - Constructor for class org.lsst.ccs.drivers.agilent.TestN6700

Constructor

TestN6700.OnOff - Enum in org.lsst.ccs.drivers.agilent

TestWG33250 - Class in org.lsst.ccs.drivers.agilent

Program to test the Agilent WG33250 device driver

TestWG33250() - Constructor for class org.lsst.ccs.drivers.agilent.TestWG33250

Constructor

TestWG33250.OnOff - Enum in org.lsst.ccs.drivers.agilent

V

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.DL34970.TcType

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.E3631.onOff

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.E3631.OutputName

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.TestE3631.OnOff

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.TestN6700.OnOff

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.TestWG33250.OnOff

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Autorange

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Function

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Limit

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Load

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Polarity

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Unit

Returns the enum constant of this type with the specified name.

valueOf(String) - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Value

Returns the enum constant of this type with the specified name.

values() - Static method in enum org.lsst.ccs.drivers.agilent.DL34970.TcType

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.E3631.onOff

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.E3631.OutputName

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.TestE3631.OnOff

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.TestN6700.OnOff

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.TestWG33250.OnOff

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Autorange

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Function

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Limit

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Load

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Polarity

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Unit

Returns an array containing the constants of this enum type, in the order they are declared.

values() - Static method in enum org.lsst.ccs.drivers.agilent.WG33250.Value

Returns an array containing the constants of this enum type, in the order they are declared.

VOLTAGE_MODE - Static variable in class org.lsst.ccs.drivers.agilent.N6700

VOLTAGE_MODE - Static variable in class org.lsst.ccs.drivers.agilent.PowerSupply

voltageLimit(double) - Method in class org.lsst.ccs.drivers.agilent.PowerSupply

W

WG33250 - Class in org.lsst.ccs.drivers.agilent

Basic routines for controlling an Agilent 33250A waveform generator

WG33250() - Constructor for class org.lsst.ccs.drivers.agilent.WG33250

Constructor.

WG33250.Autorange - Enum in org.lsst.ccs.drivers.agilent

WG33250.Function - Enum in org.lsst.ccs.drivers.agilent

WG33250.Limit - Enum in org.lsst.ccs.drivers.agilent

WG33250.Load - Enum in org.lsst.ccs.drivers.agilent

WG33250.Polarity - Enum in org.lsst.ccs.drivers.agilent

WG33250.Unit - Enum in org.lsst.ccs.drivers.agilent

WG33250.Value - Enum in org.lsst.ccs.drivers.agilent

writeE3631(String) - Method in class org.lsst.ccs.drivers.agilent.E3631

Writes a command.

C D E G I L M N O P R S T V W